GIMP :: Make Change In Preferences To What Right Mouse Wheel Does

Apr 11, 2012

I'd like to change what the right mouse button does. I went to EDIT > PREFERENCES > INPUT CONTROLLERS and tried to see where to change this (and I did successfully for the mouse wheel last week) but I couldn't find under MOUSE BUTTONS what would control what command is accessed via the right mouse wheel.

how to make a change in the preferences to what the right mouse wheel does? I know where's the most likely place to go to find the command; it's just where to access the right mouse wheel that has me stumped.

View 6 Replies


ADVERTISEMENT

GIMP :: How To Change Zoom In And Out Behavior Of Middle Mouse Wheel

Apr 4, 2012

How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.

I've googled this along with a few other things over last couple of days but no luck. Can this be done?

View 2 Replies View Related

GIMP :: Unable To Configure Mouse Wheel To Change Brush Size

Jun 4, 2011

I need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:

[URL] .....

My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.

In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.

I am using Gimp 2.6.11 on Ubuntu.

View 1 Replies View Related

AutoCAD LT :: Mouse Setup To Make Wheel Pan

Apr 20, 2012

How to set up my mouse wheel to pan when I click the wheel.  I am not sure how to do this? 

View 1 Replies View Related

AutoCad :: Change Zoom On Mouse Wheel

Sep 17, 2013

Is there a way to change the zoom on the mouse wheel? Currently to zoom out I scroll toward myself. I would like it to be the opposite since other programs I use are set up in this fashion. It would be easier if all were the same.

View 1 Replies View Related

AutoCAD 2010 :: How To Change The Mouse Wheel Settings

Mar 15, 2012

How to change the mouse wheel settings in the AutoCAD?

In the screenshot below, in the ArcGIS, the mouse wheel movement (backward/forward) can set to be “zoom in/out” depending on our choice.

Is there such settings in the AutoCAD? How to decide to the backward/forward of the mouse wheel mean?

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 3 Replies View Related

Illustrator :: How To Change Default Mouse Wheel Function To Zoom

May 20, 2013

I never use horizontal and vertical scrolling with the mouse wheel
 
I always Zoom
 
But I am forced to hold ALT down every time ...
 
I want mouse wheel to Zoom by default ...

View 1 Replies View Related

GIMP :: Tilt-wheel And Back / Forward Buttons On Mouse Not Working?

Jan 6, 2014

I have a Logitech M510 wireless mouse, and it works fine for everything, Firefox horizontally scrolls just fine with the tilt-wheel, and the forward and backward buttons on the mouse function as well. But not in GIMP.

I'm running an HP laptop with Windows 7, and GIMP 2.8.

I tried binding brush size decrease/increase to left/right scroll in the mouse wheel input and nothing happens. Then I restarted GIMP from a terminal with --verbose and told the wheel input to dump events and the only ones printed were scroll up/down. Curious, I enabled the dump for the mouse buttons input as well, and the back/previous buttons also don't generate events.

Because it works fine in other applications and because it generates no events in GIMP

View 11 Replies View Related

CorelDRAW X6 :: Mouse Wheel / Zooming

Jun 19, 2012

Where can I change that scrolling the mouse wheel moves me up and down the page instead of zooms in and out? I want it as it was in X5 (I may have changed some setting there, but that I have forgotten).

View 8 Replies View Related

3ds Max :: Mouse Wheel Zoom Sometimes Won't Work

Sep 21, 2011

Occasionally when I try to zoom with the mouse wheel it just won't let me to. I have to pan around and then it'll let me zoom again. That's extremely irritating. I've never encountered such problem in previous versions of Max. I have the service pack and both hotfixes installed.

View 5 Replies View Related

Illustrator :: CS4 Mouse Wheel Enable

Mar 20, 2013

I'm using Illustrator CS4 - Windows and I'm not able to scroll up and down using the mouse wheel nor can I scroll side to side using the mouse wheel with the ctrl-spacebar.  I'm looking for how to enable this function within Illustrator, but am unable to find it. 

View 1 Replies View Related

Photoshop :: Moving Sliders In CS6 With Mouse Wheel?

Oct 19, 2012

In CS3 after clicking onto the slider "triangle" I can then adjust it with the mouse wheel.  I don't appear to be able to do this in CS6.  Can this be remedied?

View 5 Replies View Related

CorelDRAW X5 :: Adjusting Mouse Scroll Wheel?

Apr 10, 2013

Is it possible to adjust the behavior of Corel Draw X5 in order to have the scroll wheel of the mouse behave like the scrolling action on a web browser.  I would like a vertical scroll to vertically scroll the design when I am zoomed in and some of the design continues beyond the current view. Also, I have a mouse that can scroll horizontally when the scroll wheel is nudged from side to side, so I would like to have a horizontal scroll as well, if possible.

View 1 Replies View Related

AutoCAD 2013 :: Mouse Wheel Pan Not Working?

Jul 16, 2013

my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?

View 6 Replies View Related

AutoCAD 2010 :: 3 Wheel Mouse Setting

Feb 8, 2012

I have recently installed autocad 2011 mac version, i want to change 3 wheel setting from panning to zooming i changed mbutton pan from 0 - 1 but still its not working, i changed zoom wheel from 0 - 1 but its not working and in mac mouse settings are pre installed.

View 1 Replies View Related

Photoshop :: Zooming/panning Using The Mouse Wheel

Mar 16, 2009

I don't mean the Zoom Tool, but simple zoom in/out operations. I seem to recall that the default behaviour in Photoshop was that you zoomed with Ctrl+mousewheel scrolling, and if you just scrolled, then the picture would pan up/down (vertically). And you could untick the "Zoom with scroll wheel" option if you didn't want Ctrl+scroll to mean "zoom".

However for a while now, having that option ticked seems to mean that scrolling (with no Ctrl) is all it takes to zoom in/out, and if you untick the option then you need to press Alt+scroll to zoom; in either case, there is no shortcut for panningup/down.

Anyway, whether this was really ever the case or not, my question is: is it somehow possible to make it so Ctrl+scroll zooms and (simple) scroll pans vertically?

View 1 Replies View Related

Photoshop :: Brush Size With A Mouse Wheel?

Feb 2, 2005

Just remind me again and crush my dreams, but the [ and ] cannot be mapped to the mouse wheel, can they?

View 3 Replies View Related

AutoCAD 2010 :: Scroll Wheel On Mouse

Feb 2, 2012

I have a Logitech MX Laser 1000 mouse, love the mouse.  But the Middle scroll button does not pan when you hold down the wheel.  And when you double click the wheel it no longer does a zoom extents.  When you scroll the wheel it does zoom in and out.  My mbuttonpan is set to 1. Not sure if I toggled something on or off.

View 3 Replies View Related

AutoCAD LT :: Can't Pan With Wheel On New Microsoft 3500 Mouse

Oct 29, 2010

My old microsoft mouse died and i replaced it with a new 3500.  For some reason, i cant get it to pan when i use the wheel button.  it zooms fine with the wheel... just wont pan.  I tried changing the wheel function in Control Panel... unfortunately Pan isn't an option for "program specific" functions.  The ACAD help section lists pan as the only function with the wheel button.

View 9 Replies View Related

AutoCad :: Wheel Of The Mouse Could Not Work As Pan Tool

Jul 12, 2013

The wheel as a pan tool was good the other day, but today when I opened CAD, it did not work anymore, there was no pan tool appearing when holding the wheel of the mouse. It is rather strange!! Then I searched the internet and resetted it by input command " Mbuttonpan---- 1-----enter", But there was no change.

View 5 Replies View Related

AutoCAD 2010 :: Mouse Wheel Pan Functions?

Dec 18, 2012

When you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 3 Replies View Related

Photoshop Elements :: Zoom With Mouse Wheel

Nov 2, 2012

I recently reinstalled Photoshop 8 and I used to use my mouse wheel to zoom images, now it does not work?

View 2 Replies View Related

Photoshop :: Alt Key / Mouse Wheel For Zoom (windows 7 Function)?

Apr 15, 2013

I'm using CS6 on windows 7-64bit with a keyboard and a mouse.  I have a problem with the default functionality of the "Alt" key in windows 7.  For those of you that are familiar with the default functionality of the alt key in windows 7, please skip to the next paragraph.  For those of you not familiar, pressing the alt key in most programs in windows will highlight the toolbar so that you can use the keyboard to make selections within your "File", "Edit", "View", etc. toolbars if your mouse goes dead.
 
My problem is that I use the Alt + Mouse Scroll for zoom all the time.  I rely on that feature probably more than I should.  Yes, I could use cntrl + or cntrl - for zoom but that means I have to take my right hand off my mouse and I use photoshop 8+ hours a day some days.  Time is of the essence to complete projects by the deadline.
 
I've tried disabling the default alt function in windows 7 (didn't work because you can't without third pary openware).  I've tried duplicating the shortcut in the Edit - Keyboard Shortcuts menu (didn't work because it doesn't recognize the mouse scroll).

View 8 Replies View Related

Photoshop :: Background Changes When Zoom In / Out With Mouse Wheel - Windows 8?

Oct 10, 2012

I found an annoying bug using photoshop cs6 with win 8 pro.
 
It only happens when i'm working on a file with layer. When I zoom in or out with the mouse wheel the background suddenly changes from gray to black or "trasparent" multiple times.
 
Already tried updating vga drivers and disabling gpu acceleration, with no results.

View 2 Replies View Related

AutoCAD 2013 :: 2011 Mouse Wheel Pan Not Working

Jun 19, 2013

I recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.

View 9 Replies View Related

AutoCAD 2010 :: Mouse Wheel Not Zooming Or Panning?

Mar 23, 2012

My laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!

I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)

View 1 Replies View Related

AutoCAD 2013 :: Double Click Mouse Wheel

Jun 7, 2012

I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.

I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.

View 4 Replies View Related

AutoCAD Inventor :: Orbit With Mouse Scroll Wheel?

May 7, 2008

I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.

This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?

View 9 Replies View Related

AutoCAD Inventor :: Mouse Wheel Zoom Speed

Feb 1, 2005

Is there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.

View 6 Replies View Related

AutoCAD 2013 :: 2011 Mouse Wheel Pan Not Working

Aug 15, 2013

How do I configure my mouse wheel to "press to pan" in AutoCAD 2014?

View 2 Replies View Related

AutoCAD 2010 :: 2011 Mouse Wheel Pan Not Working

Aug 17, 2010

I just installed AutoCAD 2011 (32-bit on Windows XP Pro) and my mouse wheel pan capability is not working.  I have already confirmed that my Mbuttonpan variable is set to 1.  When I press my mouse wheel button I see the 'hand icon' for a moment before my cursor returns to the crosshairs. The mouse wheel zoom works just fine, and the pan function still works on my old 2010 install.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved