CorelDRAW Graphics Suite X6 :: Slow To Open And Save Files Across Network
Apr 23, 2012
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
View 14 Replies
ADVERTISEMENT
Dec 19, 2011
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
View 5 Replies
View Related
Aug 2, 2011
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies
View Related
Sep 22, 2013
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies
View Related
Dec 11, 2010
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
View 14 Replies
View Related
Mar 21, 2012
I set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
View 7 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Aug 27, 2011
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies
View Related
Jan 14, 2013
I am new to Corel Draw X4 after using illustrator. I created some artwork for a client in hot pink. But when I try to print, or to save as a pdf, or open in illustrator it is not pink.
What do I need to do with my color settings? I have contacted Oki who assisted my in downloading the correct driver to print pantone colors. Therefore must by color settings in Corel Draw?
View 7 Replies
View Related
Jan 25, 2013
About a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
View 6 Replies
View Related
Jan 2, 2012
I'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies
View Related
Mar 4, 2013
I have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
View 9 Replies
View Related
May 30, 2012
Corel has suddenly started corrupting any new files I save. I'll make a file, save it, then when I open it... It goes through the motions of opening it, but when it is done nothing opens. There is nothing there.
If I change the file to a zip file and open the riffDATA.cdr file that works, but this CAN'T be my solution. Could a virus have corrupted Corel?
View 10 Replies
View Related
Jun 16, 2013
I have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
View 5 Replies
View Related
Jan 23, 2012
I need to save files incremental when export,that is a fragment from my script:
ActiveLayer.Shapes(98).CreateSelection Set expopt = New StructExportOptions expopt.UseColorProfile = False Set expflt = ActiveDocument.ExportEx("F:...�1.plt", cdrHPGL, cdrSelection, expopt) expflt.Finish
need to change 01.* file name with a n+1 function, is posible to do that in VB?
View 4 Replies
View Related
Mar 10, 2010
Half a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
View 15 Replies
View Related
Dec 8, 2011
I have been having problems opening old corel drw 11 jobs that i did.
Once i finish designing and close the files, it will not open the following day.
also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.
View 1 Replies
View Related
Jun 9, 2011
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
View 5 Replies
View Related
Apr 2, 2012
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
View 2 Replies
View Related
Dec 13, 2011
discovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.
View 2 Replies
View Related
Aug 17, 2011
I have multiple files open in Corel every day, and then, at the end of the day I have to run to get my lift (never at the same time!) and I would love a way to save all my files with just a click of a button.
I know Dreamweaver had this function - not sure if it still has, but I would love for Corel to have this so I don't have to scroll through all my open files and save them! If the file is not named it can pop up the save as box as usual and leave it open till the next day.
I have to save before I go, as we have very unreliable power and the UPS systems are not reliable either.
View 2 Replies
View Related
Dec 28, 2011
I was facing problems with X5 soon after installing it, it actually doesn't installs properly. Somehow i have to End Process of installation and though find X5 in my Start menu of Windows XP SP2. Well the actual problem started when i recently tried to publish PDF for one of my client's brochure of 17 pages, X5 closes all of a sudden and i have to restart the whole process. At times it creates a PDF which then has errors and Acrobat Reader don't read it.At times X5 even gives Error while saving files. Then have to click Save till it actually saves the file.I uninstalled X5 thinking, there could be some corrupted files and re-installed, but all in vain..
View 1 Replies
View Related
Jul 13, 2010
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies
View Related
Feb 24, 2011
Every time when i open a .cdr, coreldraw open the file in same file that i have been open before.
How i can make coreldraw to open files into new files not into opened ones ?
View 9 Replies
View Related
Jun 30, 2013
i hav a problem with x6 version
when iam open x5 files in x6 the Fonts are Disturbed, & change the places
View 3 Replies
View Related
Aug 29, 2012
how do i open pdf special edition files in Corel X4? i can view it as a pdf but I can't get it into corel to see it's dimensions or anything.
ps. haven't been here for quite a while. guess it's a good thing I haven't had a bunch of questions as usual
View 2 Replies
View Related
Mar 19, 2009
Temp. Drive Full, File Copy Error?I got this error in CDR XIII. I have checked my Temp Drive Folder in C: I have sufficient space in hard drive but this error occuring again & again & I could not save my hard working graphic files.
View 9 Replies
View Related
Jan 7, 2012
After recently installing Corel Draw 12 we discivered we could not open our existing .cdr files. It would make sense if we were trying to open V:12 files with an V:5 but it seems like V:12 should support V;5 .cdr files.
View 9 Replies
View Related
Jul 3, 2012
I'm using Windows 7. The previews were working now they just don't work, "preview not available". I see no check box in window 7 to turn that on or off, unlike in windows xp. I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.
Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.
View 11 Replies
View Related
Oct 29, 2012
When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
View 13 Replies
View Related
Jun 21, 2011
Every time I open a new file a new Corel Draw application opens. Is there a setting I can change to have the files open in the same application?
View 1 Replies
View Related
