I set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedWhen I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
I have Corel Draw x5; our store computer has x4 installed on it. We're having trouble opening files in x4 that were created in x5.
View 12 Replies View RelatedI just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
View 5 Replies View RelatedI have fully licensed X4 version. Last week i was receiving 4 different cdr files (cdr X4), created by other person (lets call him Jack). Files were ok, but there was some grammar mistakes, so I asked Jack to correct them and send files back to me. But! When he did that, I wasn't able to open theese files . My Corel hangs trying to open all of them. And it seems like files are opened and Corel is running, but i can not see anything, even panels...Only gray or white screen is visible.... Today, 12 of April, i received files (created also on version X4) from another person and story repeats. It only happans with some cdr X4 files, other works just fine.
Common thing is that all of them are created on X4 version. I tried several times to reinstall my corel, but it did work. I downloaded trial version of Corel X5 on other PC, there i was able to open them, save for version 14, only then i could open theese files on my pc. But i can not do that all the time. Jack is very active client and trial version is only for a month =). I need to understand is it my Corel problem, or Jacks. But todays events, shows it is my problem. I have a feeling, that it might be some corel updates, which prevent my Legal Corel X4 to open cdr files, created on Pirate Corel X4 version. Can it be true? Conflict between legal and illegal versions... If trully, such updates took place last week
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
View 5 Replies View RelatedWe have tried this on 5 different machine configurations from XP (SP3) to windows 7 (SP1).
We do magazine outlays and therefore require large files. As soon as we go above certain size ( about 1.7GB), then the file will save. But try and open the file then we get an error. Disassembling the file gives an error on opening hte RIFF file. Try and import then erro is "cannot import empty file".
Quite a few people have given advice on using smaller files, but that is impractical. Our only viable solution at the moment is using files split into 10 to 20 pages each. Importing all the section, then creating the PDF and do not bother to save the complete file. We even went as far as building a test machine with up to 24GB of RAM and all the bells & whistles and only windows barebone + updates, no other 3rd party software except Coreldraw X5.
what the size of file is that Coreldraw X5 can handle? WHere are the limitations and is there a swap file setting?
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
I find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
View 11 Replies View RelatedI am not able to open an old existing file I can see it but when I try to open it I get a message
Contains an invalid object
Click Abort if you wish to open file
Click Retry if you wish to open file
Click Ignore if you wish to open file
nothing happen what should I do ?
We have a certain customer that sends us Corel Draw files with bar codes in them and sometimes the bar codes appear as fonts when I open the files, but sometimes other files come across as bar codes. What causes the bar codes to come across as fonts on some files? Is it something the customer is doing that makes the bar codes come across as fonts?
View 9 Replies View RelatedSome saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedCorelDraw X4 seems to run slow on my new system.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
I have my memory allocation at 75%
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
View 4 Replies View Relatedthe speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies View RelatedCorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies View RelatedI have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.
View 4 Replies View RelatedHave recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
Windows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
Is there a browser that functions like Windows Explorer which is capable of displaying cmx files as thumbnails so they can be viewed dozens at a time instead of viewed one-by-one in "preview" when selecting using the import command?
View 4 Replies View RelatedAfter fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
NVIDIA Quadro 4000
16.0 GB ram
There is a little annoying folder automatically created by CorelX5 in my document folder, and I don't want it there. It destroys my file arrangement and I hate this.
Question: How can I change the destination of the folder ...Corel which is automatically created in my document folder?
I have a lot of pdfs that are A6 format, and need to keep them this size. When I open the document in Coreldraw they open as A4 page (looking at the document properties (although it does look like its the A6 size with a lot of white space around it.
How can I get corel to open it to the correct A6 page size?
I just create a few objects in the symbol manager, now I want to send those contents I createt to a friend. But I cannot find my library/symbols folder in the Corel Draw folders.
View 1 Replies View Related