CorelDRAW Graphics Suite X5 :: Not Opening Large Files?
May 30, 2011
We have tried this on 5 different machine configurations from XP (SP3) to windows 7 (SP1).
We do magazine outlays and therefore require large files. As soon as we go above certain size ( about 1.7GB), then the file will save. But try and open the file then we get an error. Disassembling the file gives an error on opening hte RIFF file. Try and import then erro is "cannot import empty file".
Quite a few people have given advice on using smaller files, but that is impractical. Our only viable solution at the moment is using files split into 10 to 20 pages each. Importing all the section, then creating the PDF and do not bother to save the complete file. We even went as far as building a test machine with up to 24GB of RAM and all the bells & whistles and only windows barebone + updates, no other 3rd party software except Coreldraw X5.
what the size of file is that Coreldraw X5 can handle? WHere are the limitations and is there a swap file setting?
View 14 Replies
ADVERTISEMENT
Jul 22, 2009
I'm trying to open a large file (1.2gig) but corel is having a error reading (dialoge box pop up). I have another file 1.19 gig which takes a few minutes to open but is fine.
I have 2gig ram so just wondering what the limit for file size in x3 file is? The file in question was running sweet yesterday so I didn't realise it was so large.
Is there any way to recover the contents ? I can see it in preview so I don't believe it is corrupt....the back-up has the same issues.
View 10 Replies
View Related
Apr 5, 2011
I'm having size problems after importing and changing files. Look at this print screen, how this 2.73 mb Photo sizes up to more than 15 Mb without me doing anything?
I used to work with X3 but after updating to X5, this problem turned up.
View 3 Replies
View Related
Apr 18, 2013
In an effort to free up space on our company server I have been tasked with archiving and/or deleting files, of which a large amount are cdr files. So my question...yesterday out of a design subfolder I deleted around 1700 backup files comprising 19GB of file space. It would be except for one thing, deleting 19GB out of that one folder cleared up 160GB of space on our server.I have double checked my file counts, sizes, folder counts, etc before and after I deleted the files and everything adds up except for the 19GB deleted cleared up 160GB of space. These files were mostly last saved with x6, though some of them were probably first created with x4.
View 9 Replies
View Related
Jul 20, 2012
Is there any way for CorelDraw X6 to export very large TIFF files? e.g. greater than 30,000 pixels in each dimension? I am currently running X5 on XP 32-bit and it cannot seem to handle it, even though Photo-Paint appears to have the ability.I finally manage to get our IT guys to give me a Win7 64-bit test machine for me to trial X6 64-bit, but seems to only do marginally better than my X5 installation. The test machine already has 7GB RAM installed plus a very, very large drive.I also had to run the same test on Adobe Illustrator and it was able to deal with this very quickly and smoothly, no troubles at all.You may find it hard to believe, but I actually like using CorelDraw :-), which is so far the standard package for our company, but if I cannot get X6 doing what we want, I'm afraid it's the end of the line.
View 14 Replies
View Related
Jul 24, 2012
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
View 3 Replies
View Related
Jul 20, 2011
I have Corel Draw x5; our store computer has x4 installed on it. We're having trouble opening files in x4 that were created in x5.
View 12 Replies
View Related
May 7, 2013
I just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
View 5 Replies
View Related
Apr 17, 2012
exporting my CorelDrawX6 files as a high quality jpg for large scale printing purposes. In X4 it was very easy - just export as usual to the highest quality cmyk jpg and open in Photo Paint... now when I export this way it takes forever to bring up the preview page and most of the time it ends up being blank. Sometimes even crashes. I have played with all options in the filter dialog menu that I can find but nothing works. Thought it might be a file size problem but never had that problem in X4 and anything under 200dpi will not be high enough quality.
View 11 Replies
View Related
Apr 12, 2011
I have fully licensed X4 version. Last week i was receiving 4 different cdr files (cdr X4), created by other person (lets call him Jack). Files were ok, but there was some grammar mistakes, so I asked Jack to correct them and send files back to me. But! When he did that, I wasn't able to open theese files . My Corel hangs trying to open all of them. And it seems like files are opened and Corel is running, but i can not see anything, even panels...Only gray or white screen is visible.... Today, 12 of April, i received files (created also on version X4) from another person and story repeats. It only happans with some cdr X4 files, other works just fine.
Common thing is that all of them are created on X4 version. I tried several times to reinstall my corel, but it did work. I downloaded trial version of Corel X5 on other PC, there i was able to open them, save for version 14, only then i could open theese files on my pc. But i can not do that all the time. Jack is very active client and trial version is only for a month =). I need to understand is it my Corel problem, or Jacks. But todays events, shows it is my problem. I have a feeling, that it might be some corel updates, which prevent my Legal Corel X4 to open cdr files, created on Pirate Corel X4 version. Can it be true? Conflict between legal and illegal versions... If trully, such updates took place last week
View 15 Replies
View Related
Jun 2, 2012
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
View 5 Replies
View Related
Jul 16, 2013
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
View 14 Replies
View Related
Aug 3, 2011
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
View 1 Replies
View Related
Mar 24, 2011
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
View 2 Replies
View Related
Jul 13, 2012
I find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
View 11 Replies
View Related
Sep 8, 2011
I am not able to open an old existing file I can see it but when I try to open it I get a message
Contains an invalid object
Click Abort if you wish to open file
Click Retry if you wish to open file
Click Ignore if you wish to open file
nothing happen what should I do ?
View 6 Replies
View Related
Jul 14, 2011
We have a certain customer that sends us Corel Draw files with bar codes in them and sometimes the bar codes appear as fonts when I open the files, but sometimes other files come across as bar codes. What causes the bar codes to come across as fonts on some files? Is it something the customer is doing that makes the bar codes come across as fonts?
View 9 Replies
View Related
Nov 22, 2011
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies
View Related
Mar 21, 2012
I set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
View 7 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
May 7, 2011
I'm using Corel X3 graphics. Windows Vista. HP officejet pro 8500a premium printer. I'm trying to print a file I used to print all the time. It's a map with bitmaps. I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page. I've tried changing every print setting that relates...Fit to Page, etc. I also restarted corel while holding down the F8 key to reset the factory defaults. I've re-installed Corel 3 times! I'm at my wits end.
View 8 Replies
View Related
Feb 10, 2011
I haven't experienced my contour offset 'jumping' in too large increments.....BUT
my contour offset tool is not working like it used to.
Only rarely would I receive the message 'contour offset too large' when offsetting a bezier curve .025"
Whenever this would happen I would then reduce my nodes or convert them to cusp or smooth. This would almost always fix the 'countour offset too large' problem.
I've reset Coreldraw to factory default but still have this problem with certain lines.
All of my software is up to date.
CorelDraw X5
27" iMac, Bootcamp, Windows 7
View 3 Replies
View Related
Feb 6, 2012
I have been running crazy trying to email a poster over to my printer. She asked the file to be put into pdf format and to keep it in cdr format. I've done that but I keep reaching the limit on my email. How exactly can I send the file over in both pdf and cdr without going over the size limit?
View 5 Replies
View Related
Mar 22, 2012
I am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.
View 2 Replies
View Related
Aug 1, 2011
Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
View 7 Replies
View Related
Nov 30, 2011
I got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 23, 2012
I am producing an 10 x 5 foot trade show display for a client. Even though the image they chose is relatively large (18.7" x 12.5" at 300 dpi), when scaled up it will be about 64 dpi at final size.
I've read that such displays typically use 75-100 dpi images. Where do you find ultra high res stock images? The one we are using is from Istockphoto.
View 6 Replies
View Related
Dec 4, 2012
I installed X6 tonight and I'm now having trouble with my Extra Large Icons in Windows Explorer. When I switch to extra large icons the first few show up correctly (CDR, JPG, GIF, etc.) but most of the rest of the GIFs and JPGs show as Corel icons. I can refresh, reload, and they still stay Corel icons. The only way to get the preview thumbnails again is to switch back to large or medium icons and then refresh. But if I switch back to extra large icons I get the same thing again. What's particularly odd is that all the Corel file formats preview correctly as extra large icons, but only a few of the GIFs and JPGs do. I have already removed and reinstalled X6 and the Corel Windows Shell Extension.
If you run the Icon size slider up, the preview thumbnails for the GIFs and JPGs change to Corel Photopaint icons as soon as you go above large icon size.
I have Win7 Pro running on an Intel i7-3820 and have updated Corel to the X6.2.
Also, I do not have any icon viewer applications installed.
I browsed around a bit and didn't see this particular problem listed.
View 2 Replies
View Related
May 6, 2011
i make a design in coreldraw x5 and export to pdf but i don't know the seeting how i compress pdf file size...so then its size is too large.
View 1 Replies
View Related
