CorelDRAW Graphics Suite 12 :: Opens Files Very Slow?
Dec 11, 2010
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
View 14 Replies
ADVERTISEMENT
Apr 23, 2012
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
View 14 Replies
View Related
Mar 21, 2012
I set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
View 7 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Jun 30, 2011
i have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
View 9 Replies
View Related
Nov 26, 2011
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies
View Related
Jan 26, 2013
after installing the update to 6.2 on my spare system coreldraw just starts with it's welcome screen in any browser (standard-browser: ie, firefox or chrome) instead of corel itself. therefore i can't work with coreldraw anymore - even cannot close it. have to kill process in task-manager.
no uninstalling possible because of the same failure: uninstall opens a browser. so no uninstall possible.
no new installation from dvd possible, because the installer also opens an browser-window instead of an installer.
system: vista64 sp2
View 14 Replies
View Related
Sep 16, 2011
When I open any of my cdr files, the view manager opens over 400 views. It takes quite a while to open any file. If I take the time to delete all of the views after opening the file, (it seems that they have to be deleted 1 by 1) and I resave the file, the views stay deleted. The ironic thing is that I have never even used the view manager, or saved any views.
View 1 Replies
View Related
Dec 17, 2012
CorelDraw X4 seems to run slow on my new system.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
I have my memory allocation at 75%
View 10 Replies
View Related
Nov 5, 2013
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
View 7 Replies
View Related
Nov 11, 2013
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
View 5 Replies
View Related
Jul 5, 2013
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
View 4 Replies
View Related
Oct 26, 2012
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies
View Related
Sep 22, 2013
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies
View Related
Feb 24, 2012
I have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.
View 4 Replies
View Related
Sep 20, 2011
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
View 2 Replies
View Related
Sep 11, 2013
Windows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
View 4 Replies
View Related
Apr 13, 2012
After fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
NVIDIA Quadro 4000
16.0 GB ram
View 6 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Oct 28, 2013
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies
View Related
Oct 17, 2012
After this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies
View Related
Oct 11, 2013
my CorelDraw files are always at least 1345 kb when I have at least one vector graphic in the file. The pdf I export from it is also that big. I made a file with just one square and it's already 1345 kb.
I just started a new cdr file and created a square, nothing else.
View 4 Replies
View Related
Jan 9, 2013
How to open, import, convert or use old files from Corel 4?
View 15 Replies
View Related
Jun 30, 2011
I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies
View Related
May 22, 2012
The best way to export Corel Draw files to a format that other non-Corel users can easily manipulate? I have had trouble saving as or exporting to other vector formats in the past. I use very large files with imported jpg graphics, etc.
Also, do any of the effects/actions (drop shadows, power clipping, grouping) that we use in Corel affect the ability of other users to at least open and manipulate the file? Even if it's not exactly the same in the converted file, what is the most convenient way to allow another artist to view & manipulate Ai or EPS exported from Corel Draw? (Specifically X6 if that applies)
View 2 Replies
View Related
Nov 13, 2012
Since upgrading to X6 Windows will not recognise CorelDRAW as being compatible with EPS files, what I mean is when going to "Open With" CorelDRAW is not listed, and even when I browse for it, select the program file it still won't recognise it.
I've raised a support case which advised me to associate EPS in teh Tools->options->global which I have done but it makes no difference.
View 2 Replies
View Related
Jan 2, 2012
I'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies
View Related
Aug 13, 2012
I have encountered an error when I imported a prn file to coreldraw x4 in win7.
after i choose that the file be imported as curve this error is showing :
Error: definefont
OFFENDING COMMAND: defineresource
STACK:
/TT15ET00
/TT15ET00
-dictionary-
View 12 Replies
View Related
Nov 20, 2011
The file extension .sbj was used by Micrografix products, and Micrografix has since become a part of the Corel Corporation. I have thousands of these files. How can I use them in CorelDraw X5?
View 1 Replies
View Related
Nov 14, 2012
file type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)
system: windows 7, coreldraw x6
problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.
1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.
View 2 Replies
View Related
