When I open any of my cdr files, the view manager opens over 400 views. It takes quite a while to open any file. If I take the time to delete all of the views after opening the file, (it seems that they have to be deleted 1 by 1) and I resave the file, the views stay deleted. The ironic thing is that I have never even used the view manager, or saved any views.
View 1 Repliesi have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedWhen I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
after installing the update to 6.2 on my spare system coreldraw just starts with it's welcome screen in any browser (standard-browser: ie, firefox or chrome) instead of corel itself. therefore i can't work with coreldraw anymore - even cannot close it. have to kill process in task-manager.
no uninstalling possible because of the same failure: uninstall opens a browser. so no uninstall possible.
no new installation from dvd possible, because the installer also opens an browser-window instead of an installer.
system: vista64 sp2
corel problem.jpg
My symbol manager doesn't work in CorelDRAW X5.
I open the symbol manager and click on local or network symbols, add library and go to c: users/public/ public documents/ Corel/ CorelDRAW Graphics Suite X5/ extras/ content/ clipart and click on any of the folders or files and then click on "ok" and I get absolutely nothing.
Nothing appears in the symbol preview at anytime. I think I am doing this according to the instructions. I know the clip art is there because I can navigate to it through windows and open them.
I uninstalled, re-installed, and updated it.
CDR X5.
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
What determines the order of items shown in the Macro Manager? Is there anyway to have the modules show up in alphabetical order?
View 5 Replies View RelatedIs there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
The latest version has built upon the QuickSwap module (select 2 images and then swap them with one click) by adding a QuickSwapSize module which not only swaps 2 images, but also swaps their sizes.The macro also has the original module SwapImage module which pops up a userform and allows the user to choose how the 2 images are swapped (e.g. swap the position of their top left corners, bottom right corners, etc). Here is a screen capture of how the modules appear in the Macro Manager docker, assign shortcut buttons/keystrokes to make them one click away:
Refer to the video below to see the intented use of this macro: cs_setInnerHtml('video_c5045c1a-10b0-489c-93f4-a1189f25d9d2','');
O/s: XP. CDR X6 Suite.
Bitstream font manager will not open. I have un-installed it, reinstalled it, uninstalled the complete suite and then reinstalled it. Was there not an issue last year with a Microsoft Security update that disabled Type1 fonts, but I'm sure Bitsream did still work. Today I had an update for "Microsoft PowerPoint Viewer" but I restored XP before today's update to try and eliminate that as being the problem. Last week I had problems with "User Profiles" being corrupted (no cdr files were listed that I could see) due to overheating hard drives but that was sorted out and everything has been fine untill today.
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View RelatedIn the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
View 2 Replies View RelatedMy object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
when I select several objects and try to deselect some of them in the object manager the list scrolls down after each click. This happens only in long lists when I deselect objects that are rather in top of the list. It then scrolls until the end of the list and I have to scroll up again for deselecting any further object. Can this be fixed?
Furthermore I would like to know if there is any way to select/deselect by a filter? For example: Deselect all objects that are of the type text or all curves that have a border.
I now have a mac and I have corel 11 loaded on to it - how can i view the clipart? - is there a program available to do this. I know that there used to be a scrapbook docker - but that seems to have gone in this version!
View 4 Replies View RelatedFor instance...I want to view all the fonts in wingdings without having to type every key on my keyboard.
View 4 Replies View RelatedI suspect that there is no way to do this, but it seemed so logical....How can I rotate the actual view of a page in DRAW? I have these box designs that I get handed, done somewhere else on the planet, with changes to various panels that are shown as upside down or at 90 degrees to the original page. I have to squint and cough backwards to read them.
Of course, for text, I can do an edit, but usually the text has been converted to curves many revisions ago. I looked, but could find no option for simply rotating the view, which would solve the problem.Surely there is a view "object" that gets filtered through the various existing View options, meaning that a simple set of transforms should also be able to rotate the entire pageview.
I do know how to kludge it, by selecting ALL and then rotating everything around a center point, but it requires than everything be selectable, and I use layers a LOT, for keeping the background frozen, for example. So, to get to a simple view of a small section on some sideways box tab, I have to unlock everything, select everything, rotate, edit, and then rotate back again and relock all the locked layers. It would make life simpler to have rotation as an option in View. Unless there's a better way???(And, no, the monitor is even harder to twist around.)
When I open a new file, my default is an 8.5" x 11" page. When I resize it for an order, the view is staying at the 100% view, yet the same operation in version 11 gives me a view as if I had entered the standard CTRL + F4.
View 5 Replies View RelatedHow do I create a top view cone shape like below?
View 6 Replies View RelatedI can view a thumbnail of the file, but the file will not open.
I created it in Corel 11, and tried to open it also in 13 and X5, but I get a message Error Reading
There are no "initial view" options on PDF export.
View 4 Replies View RelatedI currently have Graphics Suite 12. As you know there are 3 CD discs full of fonts and CDR files . . . . how do I view them . . . how do I search them??In the "good ol' daze" Coral gave us a thing called a BOOK that showed all the fonts and CDR images on the disc, but alas . . . no more books . . . all those hundreds CDR files would be very useful . . . if I knew what they were (same with all the fonts).
View 14 Replies View RelatedWhen I am in Enhanced view mode Coreldraw turns all whites into a pale yellow color. I can not figure out how to reset it to pure white. It's double strange that it I zoom in quite close to an object it reverts back to white until I zoom out again! It only occurs in enhanced view not the other modes.
View 2 Replies View RelatedI've recently installed X4 (running it on Windows 7) and for some reason when I open the scrapbook I can't preview any of the thumbnails - they just appear as a generic symbol (see below). How do I change this so that I can view the thumbnails properly?
I've also changed the settings so that once a bitmap has been inserted, I should be able to double-click to open the bitmap in Photo paint - but this doesn't work either!
I don't see thumbnails, only icons of JPG photos.
View 7 Replies View RelatedI tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedIt happens more when i import eps files:
the 'layers only' toggle of the object manager will go blank; the toggle where the master layer and all objects are listed still works, just the layers only listing goes blank. All files opened after the event will do the same, requires a shutting down of CorelDraw and restart to bring things back to normal.
windows 7