CorelDRAW Graphics Suite X6 :: Bitstream Font Manager Not Opening
Jul 24, 2013
O/s: XP. CDR X6 Suite.
Bitstream font manager will not open. I have un-installed it, reinstalled it, uninstalled the complete suite and then reinstalled it. Was there not an issue last year with a Microsoft Security update that disabled Type1 fonts, but I'm sure Bitsream did still work. Today I had an update for "Microsoft PowerPoint Viewer" but I restored XP before today's update to try and eliminate that as being the problem. Last week I had problems with "User Profiles" being corrupted (no cdr files were listed that I could see) due to overheating hard drives but that was sorted out and everything has been fine untill today.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
I recently decided to start using bit stream font navigator, how every when I first opened it and went through the wizard process, I wasn't thinking clearly and I had all my fonts saved to a flash drive. Well know i went to actually use the font catalog and it shows all my 400 plus fonts but there not usable. I keep getting a window that says to insert disc. Even though I have my flash drive plugged in and also moved a folder with all the fonts to my desk top, it still will not recognize the fonts. I have searched and tried a couple things with no luck. I'm running X6 on Windows 8.
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
I have a problem opening Font Navigator in Windows 7.
When I click the exe startup for Font Navigator Windows 7 asks if it's OK for this program to make changes to my computer. I answer yes, the screen flickers and Font Navigator fails to open.
This is a recent problem and I can't trace it to any changes on my PC. I have completely cleared Corel Suite from the computer and reloaded the applications.
I work with Corel X6 and Beatstream Navigator on regular basis. During start and save Corel & Beatstream make changes inside Windows system font (In my case Sagoe UI) and compromise it's usage for Adobe Photoshop CS6.
It's crash core menus and banners inside PS6.
Problem go away if you uninstall Bitstream Font Navigator.
Is there any other newer type manager or any other solution to solve this problem?
I open the symbol manager and click on local or network symbols, add library and go to c: users/public/ public documents/ Corel/ CorelDRAW Graphics Suite X5/ extras/ content/ clipart and click on any of the folders or files and then click on "ok" and I get absolutely nothing.
Nothing appears in the symbol preview at anytime. I think I am doing this according to the instructions. I know the clip art is there because I can navigate to it through windows and open them.
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
Is there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
The latest version has built upon the QuickSwap module (select 2 images and then swap them with one click) by adding a QuickSwapSize module which not only swaps 2 images, but also swaps their sizes.The macro also has the original module SwapImage module which pops up a userform and allows the user to choose how the 2 images are swapped (e.g. swap the position of their top left corners, bottom right corners, etc). Here is a screen capture of how the modules appear in the Macro Manager docker, assign shortcut buttons/keystrokes to make them one click away:
Refer to the video below to see the intented use of this macro: cs_setInnerHtml('video_c5045c1a-10b0-489c-93f4-a1189f25d9d2','');
When I open any of my cdr files, the view manager opens over 400 views. It takes quite a while to open any file. If I take the time to delete all of the views after opening the file, (it seems that they have to be deleted 1 by 1) and I resave the file, the views stay deleted. The ironic thing is that I have never even used the view manager, or saved any views.
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
In the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
My object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
I have a lot of pdfs that are A6 format, and need to keep them this size. When I open the document in Coreldraw they open as A4 page (looking at the document properties (although it does look like its the A6 size with a lot of white space around it.
How can I get corel to open it to the correct A6 page size?
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
I have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
