CorelDRAW Graphics Suite X6 :: Bitstream Font / Keep Getting A Window That Says To Insert Disc
Nov 25, 2013
I recently decided to start using bit stream font navigator, how every when I first opened it and went through the wizard process, I wasn't thinking clearly and I had all my fonts saved to a flash drive. Well know i went to actually use the font catalog and it shows all my 400 plus fonts but there not usable. I keep getting a window that says to insert disc. Even though I have my flash drive plugged in and also moved a folder with all the fonts to my desk top, it still will not recognize the fonts. I have searched and tried a couple things with no luck. I'm running X6 on Windows 8.
View 10 Replies
ADVERTISEMENT
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Jan 31, 2012
I've always wondered, what does Bitstream Font Nav do, and why do I want to install it?
View 15 Replies
View Related
Feb 19, 2013
What the little sun icon indicates on some of the installed fonts on Bitstream Font Navigator? I think they might be system fonts but I'm not sure.
I have too many fonts installed right now so I want to reduce that number but I don't want to cause a problem if those are required to stay in place.
View 3 Replies
View Related
Jul 24, 2013
O/s: XP. CDR X6 Suite.
Bitstream font manager will not open. I have un-installed it, reinstalled it, uninstalled the complete suite and then reinstalled it. Was there not an issue last year with a Microsoft Security update that disabled Type1 fonts, but I'm sure Bitsream did still work. Today I had an update for "Microsoft PowerPoint Viewer" but I restored XP before today's update to try and eliminate that as being the problem. Last week I had problems with "User Profiles" being corrupted (no cdr files were listed that I could see) due to overheating hard drives but that was sorted out and everything has been fine untill today.
View 3 Replies
View Related
Dec 14, 2012
I work with Corel X6 and Beatstream Navigator on regular basis. During start and save Corel & Beatstream make changes inside Windows system font (In my case Sagoe UI) and compromise it's usage for Adobe Photoshop CS6.
It's crash core menus and banners inside PS6.
Problem go away if you uninstall Bitstream Font Navigator.
Is there any other newer type manager or any other solution to solve this problem?
View 4 Replies
View Related
Sep 26, 2013
I would like to use a separate drive, like I do with PhotoShop, as a scratch disc for my Corel programs. Can this be done?
View 8 Replies
View Related
Oct 18, 2011
this is a problem that arose after repairing the previous issue, downloading the MSXML4 SP3 pack...now I can't use some fonts I purchased, open face fonts. After redownloading from supplier, issue is still not resolved.Also, I am unable to open disc 3 of Corel X3 to add fonts.
View 1 Replies
View Related
Oct 12, 2011
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies
View Related
Oct 16, 2013
Sometimes I am working with "heavy" files, images of huge size and when I thrown them to corel it really starts to slow down. My question now is, if I remember correctly there is an option when you import an image to corel it just keeps the path of the image and adds the image on corel on very poor quality just for you to work easily. When you are finished you just make something and the paths of the images are replaced with the originals.Where can I find that option?
View 6 Replies
View Related
Jul 26, 2013
Using the code from "MakeMeACircle" macro. How can I modify it to "InserCircle"? I have it working now but only if the shape is square and aligned to the bottom left of the page. If I move the square anywhere else and run the macro the "Ellipse" is created outside the square and is "squished" instead of a perfect circle.
Who knows maybe there's a macro that already exists to insert a circle inside any shape?
Sub InsertCircle()
Dim sr As New ShapeRange Dim x As Double, y As Double, w As Double, h As Double Dim dLeeway As Double ActiveDocument.Unit = cdrInch If ActiveSelection.Shapes.Count = 0 Then Exit Sub sr.Add ActiveSelection.Group sr(1).GetBoundingBox x, y, w, h 'adjust this property ####################################### dLeeway = 0# 'distance to sides 'adjust this property ####################################### sr.Add ActiveLayer.CreateEllipse(x - dLeeway, y - dLeeway, w + dLeeway * 2, h + dLeeway * 2) With sr(2): .OrderBackOne: .Fill.ApplyNoFill: End With sr.Shapes.All.Ungroup
End Sub
View 7 Replies
View Related
Oct 10, 2007
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
View 12 Replies
View Related
Sep 8, 2011
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
View 4 Replies
View Related
Apr 16, 2013
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies
View Related
Apr 18, 2013
I have CorelDRAW Graphics Suite X5 trying to use PowerTrace to trace a bitmap image. The PowerTrace window does not display when I select the object; go to Trace Bitmap --> Outline Trace --> and choose one of the types to trace. No window pops up. I can only press ESC to exit the action or ENTER which does a trace but apparently a Quick trace, not giving me the chance to refine the trace.
I'm up-to-date on fixes that I know of. Version is 15.2.0.695.
View 5 Replies
View Related
Sep 24, 2013
I've been trying to insert new barcodes into a label document on Coral Draw and it comes up with an error message saying “Failed to create object. Make sure the object is entered in system registry”.
View 3 Replies
View Related
Sep 10, 2013
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
View 14 Replies
View Related
Nov 11, 2011
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Oct 5, 2011
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies
View Related
Mar 30, 2013
I have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
View 5 Replies
View Related
Apr 27, 2012
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
View 5 Replies
View Related
Oct 17, 2012
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
View 11 Replies
View Related
Jun 9, 2013
I want to use Arabic font in corel draw x12.
View 1 Replies
View Related
Apr 20, 2011
I'm having problems opening some PDF files in 12. I keep getting a corrupt file window, Will upgrading to Corel CS5 solve the issue?
View 3 Replies
View Related
Dec 20, 2013
In Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
View 3 Replies
View Related
Sep 7, 2011
I want to import a font file to Corel X15.
View 2 Replies
View Related
Oct 5, 2011
I'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies
View Related
Oct 24, 2013
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
View 8 Replies
View Related
Oct 26, 2011
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies
View Related
Aug 24, 2011
I have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
View 12 Replies
View Related
Jul 28, 2011
Any way to change the font "codes" in suite 4 to the names used in the book we recieved when we purched the suite?
View 7 Replies
View Related
