Is there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
The latest version has built upon the QuickSwap module (select 2 images and then swap them with one click) by adding a QuickSwapSize module which not only swaps 2 images, but also swaps their sizes.The macro also has the original module SwapImage module which pops up a userform and allows the user to choose how the 2 images are swapped (e.g. swap the position of their top left corners, bottom right corners, etc). Here is a screen capture of how the modules appear in the Macro Manager docker, assign shortcut buttons/keystrokes to make them one click away:
Refer to the video below to see the intented use of this macro: cs_setInnerHtml('video_c5045c1a-10b0-489c-93f4-a1189f25d9d2','');
Is it possible to create my own docker in VBA? I found some examples using Visual Studio.
View 4 Replies View RelatedOne Question:
I noticed that in CDX4 under the tranformations docker we had the "apply to duplicate" feature under the rotate option. However, I do not see it in CDX5.
Is this a change that was made to CDX5? Or am I missing something when I loaded CDX5 to my computer?
I have just switched from X5 to X6. I am almost convinced that before, when I made a change on for instance an objects size in the Transformations docker, I then pressed Enter, and that was the same as using the mouse and clicking Apply. This doesn't work in X6, I have to lift my hand and use the mouse. Is there a way to fix this?
View 3 Replies View Relatedmy Docker Titles are gone.
View 6 Replies View RelatedProblem getting the Contour Docker to open? Menu option is there in the Window/Dockers menu, but doesn't seem to work on my system.
View 7 Replies View RelatedAfter installing the latest patch, I read that ... "You can press Enter to apply transformations from the Transformations docker".
Here's my issue...when I draw a box as shown, I try to do a "PROPORTIONAL" size change by using the 'enter' key. No luck. I then try to do a 'non-proportional scale', it works fine.
I have created a custom docker and I need to find a way to have the docker refresh when the document.save event is fired. The docker retrieves custom document properties saved within the file and displays the vales in the docker. I have it currently set to update when i switch between documents or when the document is closed, the docker is cleared of all the values. I still , to this day, can not figure out how to refresh automatically after I save a document.
<script type="text/javascript">
function OnLoad()
{
[Code]....
The Join Curves docker seems like a handy tool, unfortunately following the directions yields no change--I can't get it to do anything at all. Is this a known issue? I have X5 with the latest SP, just installed a few days ago.
View 6 Replies View RelatedI am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedAcceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedI would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
I have Corel DRAW Home & Student Suite X5. It appears not to include the Docker "Object Coordinates" although both the video and Help files include prescriptions for using it.Corel Support insist that this docker is present in this edition of X5 and instruct me to reset the application defaults (F8).F8 does not reveal the missing docker, nor does a complete uninstall/reinstall. It seems to me that "Object Coordinates actually is NOT there.
View 4 Replies View RelatedChange default settings in transform docker?
View 3 Replies View RelatedOS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
I must have pressed something, the details of the object in the object manager docker is not showing up, i always used it when selecting objects instead of selecting it from the document itself, how do i bring it back?
View 9 Replies View RelatedI cannot see any symbols in CorelDraw 5, When I open the symbols docker no one symbol appear, and if I upgrade the right path to the folder on my extra content on my PC (where the symbols files exists) no symbols appears as well.
View 14 Replies View Relatedi'm using corel draw x4 on windows 8. I use the Math-Type Editor in order to create complex formulas with indices, potencies, greek letters and fraction bars.
Unfortunately Corel Draw can't depict some of the symbols for example the small theta "ϑ" or the multiplication sign. Instead of writing them it creates a blank or question marks.
Is there a way to create those symbols in the Math-Type Editor?
Does the following macro works with symbols of Coreldraw X5? I mean the symbols/clone feature, where you can duplicate same objects and when you change one automatically the others changes as well. But this is not the traditional clone option of corel draw. URL.....
View 2 Replies View RelatedI just create a few objects in the symbol manager, now I want to send those contents I createt to a friend. But I cannot find my library/symbols folder in the Corel Draw folders.
View 1 Replies View RelatedI downloaded the new trial Corel X6 installed on win 7 64-bit.I have trouble working with transparencies inside a symbol. It also does not work if it is power-clipped inside a symbol. The error message is as follows:
This item cannot be stored inside a Symbol. The item must be removed in order to be able to finish editing this symbol. this same procedure does not work in Corel X5 oddly enough it works in Corel X4.
Is it possible to edit this macro so I can convert a bunch of symbol libraries I have created in X5 to X3?
View 3 Replies View RelatedI have just completed a 25 page document using hundreds of symbols but when I have just tried to publish it to PDF certain symbols do not appear?
I have looked back through the file and found that the ones that do not appear also no longer show the image in the symbol library but when i insert them in to the drawing they show up fine.
I have bought the hard copy version of corel draw Suit X5 and waiting for it. I originally dwn loaded it from the web and so did my son. We are working on a project together. He found TT-Musical Symbols in his dwn loaded version and I do not have it on my dwn load version. Do you have TT-Musical Symbols in your drop down text? and or when you dwn loaded the trail version, have you got it?
View 3 Replies View RelatedI am new at creating a recorded macro in Corel X5..I have done the steps to record a macro for changing a text colour within a symbol...i get an error debug message ActiveShape.Shapes(26).PowerClip.EnterEditMode
what i want to do is change a coloured text from black to white that is symbol. i have several different text that are in symbol and it is a pain to enter each one and change a colour.
I frequently require mathematical symbols such as ≤ or ≥, which are easy enough to insert as unicode characters and supported by common fonts such as Arial.
However, when I try to import text containing such characters, such as within an Excel table, they just import as "?" instead. I've tried pasting Excel table in various formats. As an Excel object or a Metafile the overall formatting is retained correctly but the symbols become question marks. Enhanced Metafile preserves the symbols but alters the fonts so that the text no longer fits within the cell, ruining the layout.
I've also noticed that when I manually insert unicode symbols using the text tool in CorelDraw X6 it changes the font to Adobe Fangsong Std R (which looks awful). If I try to change the font after the fact, everything changes except the symbols. Highlighting the symbols also looks different: rounded highlight rectangle versus normal rectangle for ordinary text. It seems CorelDraw refuses to treat these symbols as ordinary unicode text forcing them instead into this horrible wirey font instead.
I also have issues try to export from CorelDraw to say Powerpoint where Corel will automatically format some text as ligatures but when exporting these just show up as "?" in Powerpoint.
1) Is there any way to get CorelDraw X6 to reliably import and export text, including unicode symbols, without messing up the formatting/layout.
2) is there any way to get CorelDraw not to change the font of symbols?
I work in pre-press for a Label Printing company and we do Flexo and Screen printing. I get files from designers, most files have been created in Illustrator.
I use Corel Draw X5 to do my pre-press work and some of the files I get have Lens effect objects. When I apply the "No Lens Effect" the object changes to a Symbol and it has no fill and no outline, how do I convert the Symbol object to a "regular" object?
I want to know the best way to convert these Lens and Symbol objects to regular objects that are "flattened" or do not have transparency. I need to be able to work with these objects like they are a regular vector object that can be edited for pre-press to make files to send to have films output.
OR, will an object that has a Lens effect output normally if I make a Postscript file fro the Lens effect object? Do I even need to convert the Lens effect in order to get the image to output correctly?
corel problem.jpg
My symbol manager doesn't work in CorelDRAW X5.
I open the symbol manager and click on local or network symbols, add library and go to c: users/public/ public documents/ Corel/ CorelDRAW Graphics Suite X5/ extras/ content/ clipart and click on any of the folders or files and then click on "ok" and I get absolutely nothing.
Nothing appears in the symbol preview at anytime. I think I am doing this according to the instructions. I know the clip art is there because I can navigate to it through windows and open them.
I uninstalled, re-installed, and updated it.
CDR X5.
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.