CorelDRAW Graphics Suite X6 :: Change Default Settings In Transform Docker?
Jan 6, 2013Change default settings in transform docker?
View 3 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X6 :: Transform Docker Sizing
Sep 4, 2012After installing the latest patch, I read that ... "You can press Enter to apply transformations from the Transformations docker".
Here's my issue...when I draw a box as shown, I try to do a "PROPORTIONAL" size change by using the 'enter' key. No luck. I then try to do a 'non-proportional scale', it works fine.
CorelDRAW Graphics Suite X3 :: Save Settings As Default?
Aug 7, 2013X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedCorelDRAW Graphics Suite X4 :: Default Settings For New Documents?
Oct 11, 2013I use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
CorelDRAW Graphics Suite X5 :: Colour Management Default Settings
Aug 9, 2011I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies View RelatedCorelDRAW Graphics Suite X6 :: 16.3 Dimension Tool Doesn't Remember Default Settings
Apr 28, 2013Experiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
CorelDRAW Graphics Suite X6 :: Create Own Docker In VBA?
Apr 10, 2013Is it possible to create my own docker in VBA? I found some examples using Visual Studio.
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Transformation Docker
Apr 23, 2011One Question:
I noticed that in CDX4 under the tranformations docker we had the "apply to duplicate" feature under the rotate option. However, I do not see it in CDX5.
Is this a change that was made to CDX5? Or am I missing something when I loaded CDX5 to my computer?
CorelDRAW Graphics Suite X6 :: Transformations Docker
Jul 9, 2012I have just switched from X5 to X6. I am almost convinced that before, when I made a change on for instance an objects size in the Transformations docker, I then pressed Enter, and that was the same as using the mouse and clicking Apply. This doesn't work in X6, I have to lift my hand and use the mouse. Is there a way to fix this?
View 3 Replies View RelatedCorelDRAW Graphics Suite X4 :: Docker Titles Missing?
Aug 20, 2013my Docker Titles are gone.
View 6 Replies View RelatedCorelDRAW Graphics Suite X6 :: Contour Docker Won't Open
Mar 26, 2012Problem getting the Contour Docker to open? Menu option is there in the Window/Dockers menu, but doesn't seem to work on my system.
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Refreshing Custom Docker?
May 27, 2011I have created a custom docker and I need to find a way to have the docker refresh when the document.save event is fired. The docker retrieves custom document properties saved within the file and displays the vales in the docker. I have it currently set to update when i switch between documents or when the document is closed, the docker is cleared of all the values. I still , to this day, can not figure out how to refresh automatically after I save a document.
<script type="text/javascript">
function OnLoad()
{
[Code]....
CorelDRAW Graphics Suite X5 :: Join Curves Docker - It Does Nothing
Jul 5, 2011The Join Curves docker seems like a handy tool, unfortunately following the directions yields no change--I can't get it to do anything at all. Is this a known issue? I have X5 with the latest SP, just installed a few days ago.
View 6 Replies View RelatedCorelDRAW Graphics Suite 11 :: Change Settings To Have Files Open In Same Application
Jun 21, 2011Every time I open a new file a new Corel Draw application opens. Is there a setting I can change to have the files open in the same application?
View 1 Replies View RelatedCorelDRAW Graphics Suite X3 :: Change Default Bitmap Editor
Jul 25, 2011Ok so I have x3 and recently installed the trial for x5, since the trial ran out i removed it and carried on as before, this however has left a few things buggy, the first was file assocation which was easier to fix, the other biggie is that I seem unable to edit any bitmaps using the usual method. How do I re-enable the bitmap editing? and if i have the choice I'd rather it opened photoshop to edit the file opposed to corel paint if this is at all possible?
View 9 Replies View RelatedCorelDRAW Graphics Suite X6 :: Change The Default Text Size?
Feb 9, 2013How can I change the default text size? I can set the size to 12 pt in three different places and choose "save settings as default", and when I place the text cursor on the page, it goes back to 24 pt. Very maddening...
View 5 Replies View RelatedCorelDRAW Graphics Suite X6 :: How To Change Default Preferences Permanently
Aug 26, 2012where the preferences are saved for items like in the postscript tab. Automatically increase Flatness
Auto increase Fountain fill steps. Optimize Fountain Fills
Confirm to DSC
As far as I can see the default behavior for these should be ON, it used to be this could be saved as the Defaults until after version 9, now they turn off. However is there any reason to ever have them off? I think not but just in case there is I will allow as to leave them there for people to turn off.
Yes I am aware I can save those settings as Print styles and have in fact got 2, one with crop marks enabled and because crop marks are 100 % CMYK unless greyscale is chosen I have one with no cropmarks so Xerox doesn't charge me color clicks on mixed black and color prints. Of course one has only to forget to use one of these 2 preferences to have all the problems associated with not having those items checked such as dropped out complex items.
While I am at it another default should be NOT to treat all objects as filled - the first thing needed to be changed during a install. I can however live with it as is as it is not a item that needs to be changed with every job.
As I see it the most common reason for Adobe users to complain about Coreldraw is the problems that come by not having Auto Increase Flatness as a default postscript behavior and their not knowing to turn it on.
And while I am at it an addition for creating PDF's would be the option of creating as a Bitmap, this being the preferred proofing method so providing a proof doesn't provide the artwork to the client, it could also be a useful method of supplying Web artwork.
CorelDRAW Graphics Suite X6 :: Contour Docker Does Not Load Among Other Dockers
May 7, 2012I am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Contour Docker Back To Front
May 24, 2012Acceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedCorelDRAW Graphics Suite 12 :: Adding Toolbar Or Docker With Links To CDR
Jul 16, 2011I would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
CorelDRAW Graphics Suite X5 :: Missing Docker Object Coordinates
Jan 25, 2012I have Corel DRAW Home & Student Suite X5. It appears not to include the Docker "Object Coordinates" although both the video and Help files include prescriptions for using it.Corel Support insist that this docker is present in this edition of X5 and instruct me to reset the application defaults (F8).F8 does not reveal the missing docker, nor does a complete uninstall/reinstall. It seems to me that "Object Coordinates actually is NOT there.
View 4 Replies View RelatedCorelDRAW Graphics Suite X4 :: Wipe Out All Symbols In Manager Docker?
May 13, 2013Is there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
CorelDRAW Graphics Suite X5 :: How Modules Appear In Macro Manager Docker
Mar 29, 2011The latest version has built upon the QuickSwap module (select 2 images and then swap them with one click) by adding a QuickSwapSize module which not only swaps 2 images, but also swaps their sizes.The macro also has the original module SwapImage module which pops up a userform and allows the user to choose how the 2 images are swapped (e.g. swap the position of their top left corners, bottom right corners, etc). Here is a screen capture of how the modules appear in the Macro Manager docker, assign shortcut buttons/keystrokes to make them one click away:
Refer to the video below to see the intented use of this macro: cs_setInnerHtml('video_c5045c1a-10b0-489c-93f4-a1189f25d9d2','');
CorelDRAW Graphics Suite X6 :: Change Default Values For Contour Tool?
May 3, 2012Contour.jpg
Would like to have it default to 'Outside contour' mode and have the value changed to a smaller more manageable value.
CorelDRAW Graphics Suite X5 :: Transparency Settings - Change Size Of Center White Spot
Sep 14, 2012In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Change Default Color Of Dimension Lines And Text?
Aug 14, 2013Is there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Transformations Docker Doesn't Accept Enter For Applying Changes
May 24, 2012OS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
CorelDRAW Graphics Suite X4 :: How To Change Default Font Size Created By Dimensioning Tool
Sep 3, 2011How can I change the default point size of the numbers that the dimensioning tool generates? Right now it is defaulted at 24 pt. and i have to manually select and change to 10 pt all through my drawings.
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Transform Property Bar
Apr 18, 2012I know I am able to transform and object by typing feet (') and inches(") ex. 5' 6" but is it possible to display both? I know I can get it to display feet or inches but it always completes with a decimal. Is there a work around for this?
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Automation Of Image Transform
Nov 24, 2012I am trying to transform a folder of 100+ jpeg images from retangles to have rounded corners and a drop shadow....the ideal being to make them look a little like mouse mats for Amazon listings.
I can do them 1 at a time, but I want to do this to 100's of images, how to 'automate' the process??
CorelDRAW X3 :: Way To Change Default Nudge Settings?
Dec 9, 2013I like to use .001 for nudge and 20 for super nudge, so every time I open a new file I need to change it from the default settings of .1 and 2. I've always wondered if I could set my own defaults and it occurred to me to ask on the forum. I can't find it anywhere on the options menu..
View 6 Replies View Related