CDR X5.
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
My object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
when I select several objects and try to deselect some of them in the object manager the list scrolls down after each click. This happens only in long lists when I deselect objects that are rather in top of the list. It then scrolls until the end of the list and I have to scroll up again for deselecting any further object. Can this be fixed?
Furthermore I would like to know if there is any way to select/deselect by a filter? For example: Deselect all objects that are of the type text or all curves that have a border.
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View RelatedIn the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
View 2 Replies View RelatedWhen you draw a marquee around several objects and you want to eliminate one thing from the selection, is there a way to unselect just one object from being selected without having to unselect and reselect everything else?
View 9 Replies View RelatedI know my code below wont work, just putting here to hopefully explain more exactly what im trying to do
Sub FindbyFill()
Dim sh As Shape
dim findColor
ActiveSlection.GetColor = findColor
For Each sh In ActiveLayer.Shapes If sh.FillColor = findColor Then ActiveSlection + sh
End If
Next sh
Question: How can I get the objects to appear in the Object Manager?
I have the CorelDraw 6X suite. The objects in the Object Manager window are not showing up. It's supposed to have curves, images, and text there. Instead, it has got just the following:
Master Guides (all pages)
Desktop
Guides
Layer 1
Document Grid
I have been using CorelDraw since about 1999. My first CorelDraw program was CorelDraw 9. Then about six or eight months ago I purchased CorelDraw 6X
This is the first time anything like this has ever happened.
Just as of today, as I begin adding objects &/or text to a graphic, absolutely nothing is 'showing up' in the Object Manager under Layer 1. It seems like always in the past, whenever I added a shape or text or curve or anything, a new line would be added under whatever Layer I was working in, detailing the object's properties.
Is there some simple config-setting that I tripped without knowing it?
corel problem.jpg
My symbol manager doesn't work in CorelDRAW X5.
I open the symbol manager and click on local or network symbols, add library and go to c: users/public/ public documents/ Corel/ CorelDRAW Graphics Suite X5/ extras/ content/ clipart and click on any of the folders or files and then click on "ok" and I get absolutely nothing.
Nothing appears in the symbol preview at anytime. I think I am doing this according to the instructions. I know the clip art is there because I can navigate to it through windows and open them.
I uninstalled, re-installed, and updated it.
What determines the order of items shown in the Macro Manager? Is there anyway to have the modules show up in alphabetical order?
View 5 Replies View RelatedIs there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
The latest version has built upon the QuickSwap module (select 2 images and then swap them with one click) by adding a QuickSwapSize module which not only swaps 2 images, but also swaps their sizes.The macro also has the original module SwapImage module which pops up a userform and allows the user to choose how the 2 images are swapped (e.g. swap the position of their top left corners, bottom right corners, etc). Here is a screen capture of how the modules appear in the Macro Manager docker, assign shortcut buttons/keystrokes to make them one click away:
Refer to the video below to see the intented use of this macro: cs_setInnerHtml('video_c5045c1a-10b0-489c-93f4-a1189f25d9d2','');
O/s: XP. CDR X6 Suite.
Bitstream font manager will not open. I have un-installed it, reinstalled it, uninstalled the complete suite and then reinstalled it. Was there not an issue last year with a Microsoft Security update that disabled Type1 fonts, but I'm sure Bitsream did still work. Today I had an update for "Microsoft PowerPoint Viewer" but I restored XP before today's update to try and eliminate that as being the problem. Last week I had problems with "User Profiles" being corrupted (no cdr files were listed that I could see) due to overheating hard drives but that was sorted out and everything has been fine untill today.
When I open any of my cdr files, the view manager opens over 400 views. It takes quite a while to open any file. If I take the time to delete all of the views after opening the file, (it seems that they have to be deleted 1 by 1) and I resave the file, the views stay deleted. The ironic thing is that I have never even used the view manager, or saved any views.
View 1 Replies View RelatedI often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
When I try to enter text and select the drop down menu for font selection, my list of font styles does not show up until you put your cursor over a spefic font. Otherwise the list is blank. I tried to install the repair feature from the disk but that didnt change it.
View 1 Replies View RelatedI have done it in a lot of steps. There must be a simple way to do it.
View 3 Replies View RelatedThis just happened, I shut down and rebooted my computer as it has been a while since i turned it off. When I restarted and launched Corel I found that some of my fonts were missing. In particular Arial, which is my default font, was no longer in the list and was replaced by some other random font. I opened Font Navigator and saw that arial was not in the list of installed fonts, so I had to reinstall it. I checked my windows font list and Arial was installed. This has happened before but I didn't too much attention to it. why corel would just randomly drop fonts?
View 9 Replies View Relatedhave to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
QQ截图20120523105022.png
Strokes list inside style pattern is not displayed inthe art of pen tool, but can be used normally.
I just opened up X6 to find my font list is significantly wider than it should be.See image at below.
BTW, I have tried to reset (F8) the workspace.
I'm using v 16.1.0.843.
why all-the-sudden this macro does not show up in the list of macros? I'm not sure if it is conflicting with something else and it's been happening off and on.
CorelDraw X4 (14.0.0.704)
Win 7 64bit
12GB RAM
Here I would like to know how to make a bulleted list nest in CorelDraw x6?
Example:
A___ The text;
B___ The text;____1_ The text;____2_ The text;
C___ Text
I have bought the hard copy version of corel draw Suit X5 and waiting for it. I originally dwn loaded it from the web and so did my son. We are working on a project together. He found TT-Musical Symbols in his dwn loaded version and I do not have it on my dwn load version. Do you have TT-Musical Symbols in your drop down text? and or when you dwn loaded the trail version, have you got it?
View 3 Replies View RelatedMany times the file I would like to open was the sixth or seventh. how to enlarge the Recent Files list to be say 10 in CD X4 and PP X4?
View 6 Replies View RelatedI have the list of x,y coordinates for the CIE colour spectrum. How do I import the list so as to draw the spectrum curve?? The curve is the horseshoe shaped curve shown in the figure below [not the straight lines which are colours boundaries] that contains all the spectrum colours. Seems to me I should be able to import the list somehow and CorelDraw would then produce the line.
View 10 Replies View Related