Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 RepliesMy tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
When selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies View RelatedI seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies View Relatedhow to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them
View 1 Replies View RelatedThe problem I'm having with X5 is that whenever I try to save something, or open a file...I get the (not responding) message at the top of the page. Some times it will clear itself out and open or save the file, a sometimes it will just close the program.
This happens primarily in Draw....cause that's what I use the most...but has happened in Photo-Paint as well to me. 8gb of memory...so that's not the problem, and when I check for updates...it's the most current update/SP as well. It's always slow to open as well. Only about 400 fonts installed too.
So, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
Then it will say that corel is not responding ...
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
I installed X6 today and when I got to start the program it stops running immediately. When I click on the icon the start up window appears but then freezes on "Creating Application Environment" and then just stops running. I am trying to run x6 on a relatively new hp pavilion g6 laptop.
View 3 Replies View RelatedI'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
When I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View RelatedSystem is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.
View 14 Replies View RelatedWhen trying to use the Photoshop cs6 trial the program stops responding. I have uninstalled a couple of times and nothing changes.
View 8 Replies View RelatedI have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
First of all, let me say that I am very enthused with the changes in CS4. I feel that this is the best update to PhotoShop that I have seen, and I am a user since version 3.0.
The problem that I see, ocassionally, is that PhotoShop becomes non-responsive for a long period ie: 1-2 minutes. I have experienced this on both my desktop (64 bit Vista Ultimate and 64 bit CS4) and my laptop (32 bit Vista Ultimate). During this time the disk drive is continuously active as though it is swapping the file to disk. The file size, however, is not large enough to cause this and the utilization factor is shown as well below 100%. After a period of time the disk drive stops and CS4 becomes responsive again.
The system is an AMD dual core processor with 6GB RAM on the desktop and 2GB RAM on the laptop. Both systems use SATA hard drives. The CS4 scratch disc is a separate dedicated drive on the desktop. Both systems use Nvidia video and open GL is working fine on both computers. Both computers have the latest Nvidia drivers. Since there are no open GL problems, I assume that the video drivers are okay. As I have said, I see this problem on both my laptop and my desktop.
Since upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies View RelatedWhen my PSE10 stops responding, as it frequently does, it does not pay to wait. Even if it finally responds, I have to shut down my computer before I can access the app and begin work again.
View 1 Replies View RelatedI was using Roto Brush for a while today and everything was working as expected. I Roto Brushed about 20 frames, just doing touchups where necessary. However, after a while, Roto Brush just stopped responding to new strokes. I could not add or remove from the mask. I've tried flushing the RAM and then restarting AE but the problem persists.
I'm using After Effects CC on Windows 7 64-bit with 16GB of RAM.
I made a screen cast to show the problem. You'll see me painting to add and remove from the mask on a couple of frames. Roto Brush looks like it's going to do something but then nothing changes in the mask.URL....
I've been using Adobe Photoshop Elements 11 for a couple of months to create 11x8.5 photo collage's as part of my digital scrapbook. Yesterday, when I tried to create a new collage the program stopped responding and forced me to close it. It will only do this with an 11x8.5, it's not a problem for any other size, unfortunately the rest of my pages are 11x8.5 so I really need to be able to use this size!
View 6 Replies View RelatedI've got this huge project - a printed catalog - that involves hundreds of product photos, of which the originals are scattered all over the place in different directories, etc. Nobody knows where a photo might be hiding. However, luckily, this is an update of an earlier catalog of the same type, so most of the photos are already there. Unfortunately, many of them need to be "photoshopped" in some way, adding pigtail connectors in place of terminal blocks etc., which is fine.
But, when I try to use the edit bitmap function in DRAW, the photo always opens in a new copy of PhotoPaint, forcing me to then save it separately, adding a name instead of "Bitmap in..." which would be all the 100 or so photos that I will have to work on. I don't have any need to have the bitmap saved separately except that I need to have the various photos that I'm disecting in the same copy of PhotoPaint, so that means I have to jump though all these hoops.
Q: Is there a way to force the Edit Bitmap to open everything in the same copy of PhotoPaint? So that I can simply cut and paste pieces, etc.
I have several book cover designs that I've been working on in CorelDraw saved as CDRs, but now when I go to open them, they open as CDRs in Corel Photo Paint, I don't understand why? I've tried the Open from File Menu and then Save As CDR , but it doesn't work either. Is it possible I clicked on something I shouldn't have? Also, I need to separate the background from one of the designs in bitmap, the image is as if its all grouped together and won't ungroup or let me edit it, I did not save in layers or masks (any other way I can still try and edit it?
View 5 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View Related