AutoCAD 2013 :: Stops Responding When Opening Files
Nov 12, 2013
Since upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies
ADVERTISEMENT
Sep 26, 2011
I'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
View 3 Replies
View Related
Aug 28, 2013
I am a paying subscriber of Adobe CC and my problem is this. After about 15 minutes of use in Photoshop CC (32 or 64 bit), it suddenly stops letting me either create a new file or open an existing one. I select File->New->the new document dialog appears and I select the defaults and click OK. Nothing happens. Same thing with File->Open->select an existing image file and it never appears.
If I reboot my computer or logout and sign in with a different account, re-open Photoshop CC, it allows me to create and open files without issue...for about 15 minutes and then the same thing happens. This is NOT an illegal copy of the program! I am a paid subscriber.
View 6 Replies
View Related
May 18, 2012
CS5, window 7, 64 bit. Inexplicably, CS5 just stops working with PNG & GIF format files. Bridge says it's missing a/the java plug-in. Huh? Java is up to date at OS level.
View 12 Replies
View Related
May 15, 2013
I have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
View 9 Replies
View Related
Mar 24, 2011
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
View 2 Replies
View Related
Nov 30, 2012
When I double-click a file it will open the file in CS6 version 13.0.1, but then after a while double-clicking will no longer open jpeg or raw files. I can open the same files by going to File > Open in the Menu Bar.
When I am simply opening downloaded files from my camera, I can open 200-300 by double-clicking with no problems. However, at times when I am working on an image, it is not long before I can't open a file by double-clicking. It will open a blank Photoshop window, but without any Toolbar or Menu Bars.
This happens on a regular basis. Sometimes, also, Photoshop is slow to Quit, for no apparent reason.
View 7 Replies
View Related
Oct 31, 2012
System is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.
View 14 Replies
View Related
Oct 18, 2012
When trying to use the Photoshop cs6 trial the program stops responding. I have uninstalled a couple of times and nothing changes.
View 8 Replies
View Related
Nov 16, 2008
First of all, let me say that I am very enthused with the changes in CS4. I feel that this is the best update to PhotoShop that I have seen, and I am a user since version 3.0.
The problem that I see, ocassionally, is that PhotoShop becomes non-responsive for a long period ie: 1-2 minutes. I have experienced this on both my desktop (64 bit Vista Ultimate and 64 bit CS4) and my laptop (32 bit Vista Ultimate). During this time the disk drive is continuously active as though it is swapping the file to disk. The file size, however, is not large enough to cause this and the utilization factor is shown as well below 100%. After a period of time the disk drive stops and CS4 becomes responsive again.
The system is an AMD dual core processor with 6GB RAM on the desktop and 2GB RAM on the laptop. Both systems use SATA hard drives. The CS4 scratch disc is a separate dedicated drive on the desktop. Both systems use Nvidia video and open GL is working fine on both computers. Both computers have the latest Nvidia drivers. Since there are no open GL problems, I assume that the video drivers are okay. As I have said, I see this problem on both my laptop and my desktop.
View 3 Replies
View Related
Jun 23, 2011
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies
View Related
Jun 5, 2013
When my PSE10 stops responding, as it frequently does, it does not pay to wait. Even if it finally responds, I have to shut down my computer before I can access the app and begin work again.
View 1 Replies
View Related
Aug 16, 2013
I was using Roto Brush for a while today and everything was working as expected. I Roto Brushed about 20 frames, just doing touchups where necessary. However, after a while, Roto Brush just stopped responding to new strokes. I could not add or remove from the mask. I've tried flushing the RAM and then restarting AE but the problem persists.
I'm using After Effects CC on Windows 7 64-bit with 16GB of RAM.
I made a screen cast to show the problem. You'll see me painting to add and remove from the mask on a couple of frames. Roto Brush looks like it's going to do something but then nothing changes in the mask.URL....
View 9 Replies
View Related
Jul 7, 2013
I've been using Adobe Photoshop Elements 11 for a couple of months to create 11x8.5 photo collage's as part of my digital scrapbook. Yesterday, when I tried to create a new collage the program stopped responding and forced me to close it. It will only do this with an 11x8.5, it's not a problem for any other size, unfortunately the rest of my pages are 11x8.5 so I really need to be able to use this size!
View 6 Replies
View Related
Jul 14, 2012
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
View 4 Replies
View Related
Feb 19, 2013
When I open certian drawings, my autocad will freeze up and says autocad application is not responding. this only happens with certian drawings. I have tried restarting my computer, closing all other programes and only having autocad running, opening the file on a diffrent computer, and updating my graphic driver.
I have attached a screen clip of the error message I'm getting.Capture.jpg
View 4 Replies
View Related
Dec 10, 2013
I just installed Autodesk Inventor Pro 2014 as a student for my engineering class and I have yet to get it to work properly. Every time I try to open the program, it will open to the main selection page. But the first click I do on the screen causes it to say 'not responding'. I have to close the program and try opening it again. The second time, it does not even get past the opening screen. It freezes and I end up having to log off of my user and log back in. I have the 64-bit version that matches my computer.
View 3 Replies
View Related
May 1, 2012
a colleague has 2013 and when he opens a file e.g.. Rob's cottage.dwg it is listed/shown as Drawing 1 in ACAD and if he tries to save he needs to browse to the folder and select the file called Rob's cottage and overwrite.......is this a setting I can't recall?
don't have PC specs handy, but was running fine for 2012 and previous versions (on subscription)
View 7 Replies
View Related
Jan 23, 2013
When opening a file, or attaching an external reference, the file dialog box does not always default to the last folder where a file was opened for attached from. It was defaulting to the folder at the top of the list on the left side of the dialog box until I deleted the cloud icon. But, there is still a problem with defaulting to the last path accessed.
View 1 Replies
View Related
Oct 18, 2012
When opening non native dwg files (exports say from solidworks) it doesn't bring the file into the correct areas in relation to the model being in the model space, drawings being in the paper space and not just pasting into Autocad from the non native file.
View 1 Replies
View Related
Apr 18, 2012
I regularly recieve files from Architects and of course they have several xrefs. I have all of particular files that are referenced, however i cannot open the main file and have them load in 2013. I also cannot click reload or even detach and then reattach them. Nothing happens. However if i open the file in 2012 it opens just fine then i can bind everything into one. is there a setting i need to change?
View 1 Replies
View Related
Jul 26, 2013
When I try to open help in Inventor 2013, I get the error shown below about internet access.So I downloaded the offline files and saved them to C:program filesautodeskinventor 2013 and double clicked on the tutorial_files.ipj file to open Inventor as instructed in the installation notes, but still get the error. I opened the HelpIds.xml file in the Inventor Bin folder and set Use Online="0" and also copied another set of files into c: programs autodesk inventor2013local help and double clicked the tutorial_files.ipj file located there.
View 2 Replies
View Related
Sep 19, 2013
One of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
View 9 Replies
View Related
Sep 17, 2013
After opening and using photoshop cs6 for a few minutes I get a box popping up saying Adobe Photoshop CS6 has stopped working. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." So far never received any notifications about a solution. I notice that it closes soon after I try a CTRL T to select an image.
View 9 Replies
View Related
Mar 14, 2009
Ihave CS3 extended running on Vista.Program ran find for months until yesterday, Whenever I try to open a picture file CS3 stops working and shut down. It doesnt matter what type file. I removed program amd reinstalled, still got same probelem. Any suggestions on how to solve?
View 10 Replies
View Related
Oct 25, 2013
Every time you work on large assembly or drawings inventor goes not responding and in the task bar an ADApplicationButton could be seen which is running in the background while inventor hangs.
View 4 Replies
View Related
Mar 1, 2013
My stand-alone PC:
6GB of RAM
WIN7 64bit
AMD x2 240 processor 2.8GHz
After installing all products within Building Design Suite Ultimate 2013 and/or Infrastructure Design Suite Ultimate 2013 I try to open AutoCAD 2013 and get the attached screen. It just grinds and try to open but always shows "not responding". I've read posts that suggest uninstalling and re-installing. I've done this several times. I've used the Microsoft Fix-It engine to completely erase from the PC. I have even just installed the AutoCAD portion and it will not open. Each time I reinstall it asks me to supply all proper credentials, product code, etc. It shows green check marks so I know my codes are correct.
I've tried opening other programs and the only successful one is Revit. Am I to point the start-up of the programs to the licenses or something.
View 3 Replies
View Related
May 18, 2013
I have been trying to install and run a student version of AutoCAD 2013 on my computer and it keeps crashing/freezing at the first startup after installation, and never works after that. Installation is all fine and smooth. Starting the program however takes a few seconds to load the plugins then it hangs at the loading screen forever. I've tried turning off the loading screen but the program itself just crashes and appears to be "Not Responding" anyway. I've tried uninstalling all Autodesk products and only install AutoCAD 2013 but it's still not working.
As for my computer, it runs Autodesk Inventor 2014 very well. Specification-wise:
Windows 7 Professional 64-bit
Intel Xeon E31220 3.10GHz
RAM: 16GB
NVIDIA Quadro 600
View 5 Replies
View Related
Nov 16, 2012
I have the Creative Suite cs5.1 student version (had it for about a year now), and now recently I have started to encounter a strange bug with Photoshop.
Sometimes when I have been working in PS for a while and then open another file, the photoshop starts acting weird, resulting in the file looking like this: [URL] .....
And if I try to paint anything, it will look pixelated like in this file: [URL] .... and if I use ctrl+z after painting the paint just looks like this: [URL]...... the 2 last named effects will also apply for any images opened before this occurrence, and it happens for any file type.
I have checked my video card drivers, and they are up to date, so that's not a problem (My graphics card is ATI Radeon 5700 series). I've also run a throughout virus scan with Norton without it finding anything.
View 1 Replies
View Related
Sep 30, 2013
in my autocad 2014 save as in 2007 & 2004 format system is not responding and not able to finish. but when i save in 2013 and 2010 format is ok. i install same copy of autocad in my laptop its working good.
my system config: operating system - w7 64bit
8gb ram and 1tb hard disk
View 8 Replies
View Related
Oct 2, 2012
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
View 4 Replies
View Related
