Photoshop :: CC Stops Opening Files After 15 Minutes?
Aug 28, 2013
I am a paying subscriber of Adobe CC and my problem is this. After about 15 minutes of use in Photoshop CC (32 or 64 bit), it suddenly stops letting me either create a new file or open an existing one. I select File->New->the new document dialog appears and I select the defaults and click OK. Nothing happens. Same thing with File->Open->select an existing image file and it never appears.
If I reboot my computer or logout and sign in with a different account, re-open Photoshop CC, it allows me to create and open files without issue...for about 15 minutes and then the same thing happens. This is NOT an illegal copy of the program! I am a paid subscriber.
CS5, window 7, 64 bit. Inexplicably, CS5 just stops working with PNG & GIF format files. Bridge says it's missing a/the java plug-in. Huh? Java is up to date at OS level.
When I double-click a file it will open the file in CS6 version 13.0.1, but then after a while double-clicking will no longer open jpeg or raw files. I can open the same files by going to File > Open in the Menu Bar.
When I am simply opening downloaded files from my camera, I can open 200-300 by double-clicking with no problems. However, at times when I am working on an image, it is not long before I can't open a file by double-clicking. It will open a blank Photoshop window, but without any Toolbar or Menu Bars.
This happens on a regular basis. Sometimes, also, Photoshop is slow to Quit, for no apparent reason.
Since upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
I've installed GIMP 2.8 on Windows XP. It was working fine till yesterday. It is crashing within 3-5 minutes of opening an image and when working on the image.I get run time error.
After opening and using photoshop cs6 for a few minutes I get a box popping up saying Adobe Photoshop CS6 has stopped working. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." So far never received any notifications about a solution. I notice that it closes soon after I try a CTRL T to select an image.
Ihave CS3 extended running on Vista.Program ran find for months until yesterday, Whenever I try to open a picture file CS3 stops working and shut down. It doesnt matter what type file. I removed program amd reinstalled, still got same probelem. Any suggestions on how to solve?
I have a file that looks like it is going to open nice and fast and then it gets stuck at 50% synchronizing references. It literally takes over 5 minutes for the file to come completely up and ready to work on.
In the file I have an existing ground surface data reference and two corridors (with alignments, profiles and profiles views) that are basic access roads roughly 1200' long each with a very basic assembly. I also have a pipe network data referenced that is just a bunch of pipes that represent existing utilities crossing the access road so I can show them in cross sections. The final thing I have in here are 50' cross sections for each of these access roads.
why does it take me 5+ minutes to get into this file?
I have the Creative Suite cs5.1 student version (had it for about a year now), and now recently I have started to encounter a strange bug with Photoshop.
Sometimes when I have been working in PS for a while and then open another file, the photoshop starts acting weird, resulting in the file looking like this: [URL] .....
And if I try to paint anything, it will look pixelated like in this file: [URL] .... and if I use ctrl+z after painting the paint just looks like this: [URL]...... the 2 last named effects will also apply for any images opened before this occurrence, and it happens for any file type.
I have checked my video card drivers, and they are up to date, so that's not a problem (My graphics card is ATI Radeon 5700 series). I've also run a throughout virus scan with Norton without it finding anything.
I'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
the Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
Bridge CS6 always stops importing the files from my D800 via USB 3.0 after exactly 6 jpg files are transferred. In mixed nef+jpg as well as in jpg only mode. No matter if CF only or SD only or both cards are used. No problem with .nef only.To change the target directory to another SSD or HD makes no difference.
But at the same USB 3.0 ports (I tried them all), no problem whatsoever to do the transfer via Windows Explorer. So I guess it must be something with Bridge and USB3.0 and jpgs from the D800.System is a brand new W7Ultimate64 on an IvyBridge Z77 platform.
Okay, so basically I selected some 40 images in .bmp to load into Photoshop, but it stops working and closes. I don't have any other versions installed and I already tried installing it again, with no avail. Is there anything I can do to fix this? Should I also try installing Bridge again?
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I recently purchased CS6 and loaded it to my desktop PC running Windows 7 and everyhing is fine.
I recently purchased a new laptop and loaded a second copy to it (running Windows 8). When I process a RAW file and try to open it in PS6 about every 4th file does not appear in the PS6 workspace. The file details show in the top left corner, the background layer appear, I supposedly can save this file but I cannot see anything. When I close PS6 and re-open it and re-open the ACR file, then open to PS6 if works fine.
I have Photshop CS6 Extended but when I click on the .cr2 which is the RAW file I keep getting an error message "Could not complete your request because it is not the right kind of document"
I have tried installing the camera raw plugin Photoshop Camera Raw 7.1
I am running CS4. I have downloaded all recent upgrades. I have upgraded my camera body from a Nikon D90 to a D7000. Photoshop will not open the D7000 RAW NEF files. Jpeg files are fine.
Yesterday, before closing down, I uninstalled P/S 7, CS2 and CS3 to gain space, but do not know whether that action is relevant to my problem. Today I find that JPEGs will not open in Photoshop, and in Bridge only by going through Camera Raw. Photoshop will open tiffs, while Bridge will open some, but not all tiffs, through Camera Raw only. This problem follows many months of trouble-free operation of CS6.
My operating system is Windows 7 Ultimate. I have downloaded the latest patches for CS6, and have set the Bridge Preferences item on File Associations to Default.
I am using win 7 and CS5. I have both JPG and RAW files; however all of a sudden when I attempt to open some JPG files, they somehow are vertically truncated only opening halfh the picture.
This problem just started recently on my PhotoShop 7.
I try to open an EPS file that was created in Illustrator or Freehand (or any other EPS that is not a Photoshop EPS), it opens up as a blank document, like a transparent layer (you just see the gray and white checkerboard background). This happens whether I try to open the file by FILE>OPEN or if I drag the EPS file over the PS7 icon.
I tried everything and looked everywhere but without success.
I have two different psd files I cannot open. I last worked on these files May 30th. For each of them I completed a detailed mask, added a path and saved the files without changing the name. Today I went to work on my project and could not open either file.
When opening the 1st file I got this error message: Could not complete your request becaus the file is not compatible with this version of Photoship. When opening the 2nd file I got this error message: Could not complete your request because it is a not a valid Photoshop document.
I just bought a 50D and did a wedding. I have a new photoshop CS4. I just downloaded the most recent update. None of my RAW images will open in photoshop. They open in the Canon software that came with my camera, but won't open in Photoshop.
I have a question about opening a .dds file to make skin for a car in RACE 07.
I have already installed the NVIDIA DDS plug-in and it used to work on PS CS2. Now I tried it on CS3 and at first it said that it was an unknown file format or something (don't remember the exact error). So I first re-installed the plugin. When that didn't work, I copied the dds.8BI file from the Plug-Ins folder in the CS2 folder to the Plug-Ins folder in the CS3 folder on my external HDD. Then I had the same error on both photoshops: "Could not complete your request because the file-format module cannot parse the file."
