a colleague has 2013 and when he opens a file e.g.. Rob's cottage.dwg it is listed/shown as Drawing 1 in ACAD and if he tries to save he needs to browse to the folder and select the file called Rob's cottage and overwrite.......is this a setting I can't recall?
don't have PC specs handy, but was running fine for 2012 and previous versions (on subscription)
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
When opening a file, or attaching an external reference, the file dialog box does not always default to the last folder where a file was opened for attached from. It was defaulting to the folder at the top of the list on the left side of the dialog box until I deleted the cloud icon. But, there is still a problem with defaulting to the last path accessed.
View 1 Replies View RelatedWhen opening non native dwg files (exports say from solidworks) it doesn't bring the file into the correct areas in relation to the model being in the model space, drawings being in the paper space and not just pasting into Autocad from the non native file.
View 1 Replies View RelatedI regularly recieve files from Architects and of course they have several xrefs. I have all of particular files that are referenced, however i cannot open the main file and have them load in 2013. I also cannot click reload or even detach and then reattach them. Nothing happens. However if i open the file in 2012 it opens just fine then i can bind everything into one. is there a setting i need to change?
View 1 Replies View RelatedWhen I try to open help in Inventor 2013, I get the error shown below about internet access.So I downloaded the offline files and saved them to C:program filesautodeskinventor 2013 and double clicked on the tutorial_files.ipj file to open Inventor as instructed in the installation notes, but still get the error. I opened the HelpIds.xml file in the Inventor Bin folder and set Use Online="0" and also copied another set of files into c: programs autodesk inventor2013local help and double clicked the tutorial_files.ipj file located there.
View 2 Replies View RelatedSince upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies View RelatedOne of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies View RelatedMy main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies View RelatedWhile opening the autocad file it is showng some warning & I dont know what is this.
View 2 Replies View RelatedAfter upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
I have AutoCAD Civil 2013 and AutoCAD 2010 installed on my Windows 7 system.
Whenever I double click on a *.dwg file Windows starts up Civil instead of AutoCAD 2010 to open the file. Even if I already have AutoCAD 2010 running.
I went into the Control Panel Associations and attempted to Associate a file type with a specific program. When I pcik the *.dwg file extension the only option that Windows gives me is "AutoCAD Application". I even browsed to the AutoCAD 2010 directory and manually chose acad.exe but Windows just defaulted back to "AutoCAD Application".
Using Autocad - I am not a designer or engineer so have no experience using the software. I am working on a translation of an autocad file. However when I open the document I can only see the 'front page' of the document and Can't find any way to navigate through the different pages (even if I know there should be a lot more than 1 page)
I realise it sounds like a stupid request, but as mentioned, I have no experience with this software.
The user has Autocad 2014 64 bit Service Pack 1 running over Windows 7 Pro. Everything is working fine until she receives .dwg files from a supplier that uses Autocad 2010. When she opens those files, the screen is empty, no crash/freeze, no error message, just a black background. The other opened files are still there in the background.
The only way she can open the file is by asking a colleague, also running Autocad 2010, to open the file and convert it using the WBLOCK command. After the conversion the Autocad 2014 user can open the file without issues.
one of our users is opening AutoCAD from Vault, accessing his files this way.but every file we open, the AutoCAD installed open up a new process, resulting in multi AutoCAD applications.so If I have 4 drawings open, I have 4 processes of vault open,
View 5 Replies View RelatedEvery once and a while when I open up a dwg, autocad will load with what looks like two viewports in my model space tab. The bottom viewport is not clickable and the top viewport is very thin and is the one I am able to move around in. I would like to get this to stop.
View 6 Replies View RelatedWhen AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedSince i have all kinds of Autodesk products on my computers, i didn't notice this. But a third party programmer (not for CAD) mentioned that IE10 does not open DWGs like its predecessors IE9, IE8 and IE7 did. Is she talking about DWFs or did IE actually read DWG files?
View 8 Replies View RelatedI am a tech at a University and am working the new deployment image for our Architecture Design lab. I just installed AutoCAD 2013 and I get this error when opening Civil 3D.
Message Box
Title: Execption in c:program filesautodesksutocad civil 3d 2013aeccuipressurepip...
Body: Unhandled Exception C06d7E (Delayload "Fdo.dll" Module Not Found) at address FD90CACdh
I have tried reinstalling and copying fdo.dll and aeccuipressurepipes.arx from the install files to installed location and still get this error.
System specs: Dell Precision T3500
Operating System: MS Windows 7 Professional 64-bit SP1
CPU: Intel Xeon W3530 @ 2.80GHz
RAM: 6.00 GB Triple-Channel DDR3
Graphics: ATI FirePro V7800 (FireGL) (Dell)
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedI am looking for a way to verify what version an AutoCAD file is without opening the file. I have a customer that requests the files to be in an older version of AutoCAD and for QA purposes I would like to verify that the files we are sending out are in the correct version.
View 1 Replies View RelatedI get an error every time I open any drawing after it has been saved in 2013. Opening a dwg that was created in an earlier version does not give the error, but after I save it in 2013, it does.
If I create a new dwg in 2013, save it, close it and then open it I don't get the error the first time. But then if I save that dwg again, I will get it the next time I open it.
The exact error is:
One error was found in the drawing file during open. Would you like to cancel this open?It is recommended you cancel the open and run the RECOVER command on the drawing file.
I run the recover command. It says it found, fixed, and erased 1 error. I save, close, and reopen the drawing and the error still appears every time.
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies View RelatedI have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 Replies View RelatedSo my other designer is having issues getting his ACAD to open directly from a DWG file. He can open just fine using hydracad, or autocad, or acad mechanical, and open the file once inside. The problem only arises while opening straight from the DWG file on our server (or his hard drive itself, doesnt matter the location). Any DWG file for that matter. Myself and another designer are able to open them all just fine, and have no issues. We are all running with the exact same settings of startup (1), and all have the same computer specs.
Intel(R) Xeon(R) CPU E5502 @ 1.87GHz 1.86GHz (2 Processors)
8gig ram
64 bit operating system.
Nvidia Quadro NVS 290
and a couple 250 gig Hard drives.
We tried running a repair and it didn't do anything. Not sure what the issue could be. I tried performing quite a few of them for him (even though none of the titles indicated they were having troubles opening just with DWGs, as most were having freezes on the splash screen just opening the .exe).
I have 2013 on my system, and it was working fine for a few weeks, but then one day I tried to bring it up and got this error:
[URL]
and when I click on the ok button, it shuts down the CAD window again. I tried repairing teh install, and then I tried reinstalling the program. I still get the same error, no matter what.