When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 RepliesEnvironment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedAutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies View RelatedI recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View Relatedwhen trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedI am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
I have started receiving the following error:
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
Map3D 2012
Intel Core2 Duo
2.66ghz
3gb ram
I just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies View RelatedI've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
using autoCAD 2009 everytime I open up the Layer Properties Manager, it causes a Fatal Error and autoCAD to shut down, this is a first and need need to know how to solve this problem or at least a diagnose.
View 1 Replies View Relatedwhy when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies View RelatedI keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedI have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
I installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies View RelatedI' m working whit autocad 2013.
when I copy a plan from one file to another different file I have a fatal error: C0150014H fc0135fah
today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies View RelatedI have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
Why I am receiving the error when trying to resave my drawing? It aborts AutoCAD altogether and doesn't save the drawing.
-FATAL ERROR: Unhandled Access violation reading 0xbfbc4748 Exception at e84c7bd9h.
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies View RelatedEverytime AutoCAD 2014 shuts down I get a fatal error with the d3b42920h. It doesn't seem to be the drawing that is erroring because it doesn't ask for a recovery file to be saved, but the program it'self.
When SDI is set to 1 everytime you open a new drawing the error occurs.
We do have a company wide network deployment with customised settings for over 40 machines and it only happens on certain machines. I don't want to restore default settings as and re-load our company settings on every machine this happens.
When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies View RelatedEvery time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
We got the FATAL ERROR: Unhandled c000417h Exception at 6cbf0468h after opening some drawings..
it is an win7 Professional x64 sp1 workstation.
When ever I try to modify a hatch from a previous version I get a fatal error message and the program shuts down. I have opened the same files in 2012 and have no problem changing the hatch patterns.
View 1 Replies View Relatedso i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
User say that when open a DXF, they receieve the error
AutoCad Error Aborting
FATAL ERROR: Unhandled e0434352h Exception at fd91ac3dh
System
Dell T3500
Windows 7 x64
8gb of DDR3
2GB nVidia Quadro 4000
I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View Related