AutoCAD 2013 :: 2014 Fatal Error Using Hatch Command?
Oct 17, 2013whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
ADVERTISEMENT
AutoCAD LT :: 2014 FATAL Error HATCH While Giving Command?
Jun 26, 2013We are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
AutoCAD LT :: 2013 Fatal Hatch Error
Apr 19, 2012I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedAutoCAD 2013 :: Fatal Error Ad314c65h Starting 2014
Apr 3, 2013I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies View RelatedAutoCAD 2013 :: 2014 Fatal Error D3b42940h On Close
Jun 11, 2013Everytime AutoCAD 2014 shuts down I get a fatal error with the d3b42920h. It doesn't seem to be the drawing that is erroring because it doesn't ask for a recovery file to be saved, but the program it'self.
When SDI is set to 1 everytime you open a new drawing the error occurs.
We do have a company wide network deployment with customised settings for over 40 machines and it only happens on certain machines. I don't want to restore default settings as and re-load our company settings on every machine this happens.
AutoCAD 2013 :: Fatal Error On Modifying Hatch - Program Shuts Down
May 9, 2012When ever I try to modify a hatch from a previous version I get a fatal error message and the program shuts down. I have opened the same files in 2012 and have no problem changing the hatch patterns.
View 1 Replies View RelatedAutoCAD Civil 3D :: 2014 To 2013 Causes FATAL ERROR When Drawing Has Infill Grading
May 23, 2013We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
AutoCAD 2013 :: 2014 Object Enabler Causes Fatal Error On Etransmit And File Conversion
Aug 16, 2013I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedAutoCAD 2013 :: Fatal Exception Error When Trying To Move Command Line
Oct 3, 2013I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies View RelatedAutoCAD LT :: 2006 Crashes When Selecting A Hatch - Fatal Error
Mar 19, 20133 out of every 4 times I select a hatch, to edit properties or delete, AutoCAD gives me the FATAL ERROR message and cannot continue. It is not just in one file, but in any file from what I can tell. Not just imported hatches either, AutoCAD standard hatches as well. I have reinstalled, downloaded whatever service pack I could find. This is so harmful to productivity.
View 6 Replies View RelatedAutoCAD Civil 3D :: Fatal Error - Create COGO Point (2014)
Jul 10, 2013I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
AutoCAD 2013 :: 2013 To 2014 Hatch Pattern File Migration?
Jul 1, 2013I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
AutoCAD Inventor :: Sculpt Command - Fatal Error
Sep 23, 2011My sculpt command seems to be temperamental. I've created some surfaces using the revolve command and now want to sculpt using those surfaces. It won't show me a preview of the section to be removed and as I keep trying I get bumped out of inventor (fatal error). The other strange part to this is that i t worked once before on one side of the part and not the other. And now that I try again on the part that worked; it won't work any more. ?
(Using R2010 service package 0)
AutoCAD 2013 :: Fatal Error When Import Sketchup Into 2013
Jul 3, 2013why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies View RelatedAutoCAD 2013 :: Fatal Error On Start?
Jan 4, 2013I have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
AutoCAD 2013 :: Fatal Error On Initial Program Run
Nov 13, 2012I installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
AutoCAD 2013 :: Fatal Error With DGN File Reference
Aug 27, 2013AutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies View RelatedAutoCAD 2013 :: Importing DGN Causing Fatal Error
Jun 18, 2012I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies View RelatedAutoCAD 2013 :: Fatal Error C0150014H Fc0135fah
Apr 17, 2013I' m working whit autocad 2013.
when I copy a plan from one file to another different file I have a fatal error: C0150014H fc0135fah
AutoCAD 2013 :: Fatal Error When Opening A File?
Sep 4, 2013When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedAutoCAD 2013 :: Fatal Error Unhandled Exception
Jun 19, 2012today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies View RelatedAutoCAD Civil 3D :: Fatal Error Upon Startup Of 2013?
May 11, 2012I have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
AutoCAD 2013 :: Fatal Error When Resave Drawing
Aug 30, 2012Why I am receiving the error when trying to resave my drawing? It aborts AutoCAD altogether and doesn't save the drawing.
-FATAL ERROR: Unhandled Access violation reading 0xbfbc4748 Exception at e84c7bd9h.
AutoCAD 2013 :: 2014 Freezes With Open Command
Oct 1, 2013I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies View RelatedAutoCad :: Trim Command Change Between 2013 And 2014?
Nov 15, 2013Noticed a change in the trim command between 2013 & 2014?
In 2013 (with out selecting trim all) the trim line didn't have to intersect the line you wanted to trim. We just upgraded to 2014 and I noticed that if I want to trim a line that the lines have to intersect. A line that doesn't intersect with the selected trim line will not trim.
AutoCad :: 2013 / Lost Window For HATCH Command
Sep 19, 2012Instead of a window popping up with the hatch settings, I just get the following in the command prompt:
Pick internal point or [Select objects/settings}:
what might be causing this?
AutoCAD 2013 :: Fatal Error / Unhandled E06d7363h Exception At Fe07cacdh
Aug 7, 2012When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies View RelatedAutoCAD 2013 :: Fatal Error / Unhandled E0434352h Exception At Fd51940dh
Oct 1, 2013Every time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
AutoCAD 2013 :: FATAL ERROR - Unhandled C000417h Exception At 6cbf0468h
Apr 8, 2013We got the FATAL ERROR: Unhandled c000417h Exception at 6cbf0468h after opening some drawings..
it is an win7 Professional x64 sp1 workstation.
AutoCAD 2013 :: FATAL ERROR Unhandled Access Violation Reading
Nov 3, 2013so i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
AutoCAD 2013 :: FATAL ERROR / Unhandled E0434352h Exception At Fd91ac3dh
Jun 20, 2013User say that when open a DXF, they receieve the error
AutoCad Error Aborting
FATAL ERROR: Unhandled e0434352h Exception at fd91ac3dh
System
Dell T3500
Windows 7 x64
8gb of DDR3
2GB nVidia Quadro 4000