AutoCAD Inventor :: Sculpt Command - Fatal Error
Sep 23, 2011
My sculpt command seems to be temperamental. I've created some surfaces using the revolve command and now want to sculpt using those surfaces. It won't show me a preview of the section to be removed and as I keep trying I get bumped out of inventor (fatal error). The other strange part to this is that i t worked once before on one side of the part and not the other. And now that I try again on the part that worked; it won't work any more. ?
(Using R2010 service package 0)
View 1 Replies
ADVERTISEMENT
Jun 26, 2013
We are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
View 3 Replies
View Related
Oct 17, 2013
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
View 1 Replies
View Related
Oct 3, 2013
I am new to AutoCad 2013 from 2000. When I try to move my command line, because it's in the way, I get a fatal exception error.
View 6 Replies
View Related
Jun 12, 2012
What is probably a fairly basic 3d Modelling operation. I have a series of planar surfaces arranged to create a relatively basic object. I am now trying to use the sculpt command to convert these into a 3d solid but keep getting the error message;
"Modeling Operation Error: Operation did not add or remove material. Solid creation failed, no watertight volume detected."
Is there any way of;
A. forcing the sculpt command to work through altering some sort of fuzz distance option etc?
or failing this
B. identifying the non compliant sufaces involved so I can attempt to tweak them to suit?
View 9 Replies
View Related
Nov 25, 2013
I used surfaces to try and create a solid but it will not sculpt...new to this feature...Can it be made into a solid the surfaces or is there another far better way to create?
View 9 Replies
View Related
Feb 28, 2013
Is there a way to sculpt a part composed of multiple solid bodies without having to perform the sculpt command for each solid body? I want to use the same work plane to remove material from a part but the sculpt command only allows me to select one body at a time. This means after the first sculpt of one solid, I need to turn on the visibility of the consumed work plane and perform a sculpt on each of the remaining solids.
Not a huge issue, but in the future I may need to do a large number of these tasks. I attached a sample file. I threw it together in 30 seconds so it's not the prettiest looking thing.
View 4 Replies
View Related
Nov 16, 2011
when opening a .iam file i get the Error:
FATAL ERROR: Schema Migration occurring without Schema Version change. Migration: RSeRevisionHistory Schema
Inventor 2012 Professional SP1 64-Bit
Windows 7 64-Bit
View 1 Replies
View Related
Aug 1, 2009
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies
View Related
Apr 1, 2013
I would like to create an addin in VS2010 & IN2012. How I could able to do this? I have started with "simpleAddin". But, while building I could able to see the following error.
The same error for all Addins.
Error 1 The command "mt.exe -manifest "E:Program FilesAutodeskInventor 2012SDKDeveloperToolsSamplesVB.NETAddInsSimpleAddInMy ProjectSimpleAddIn.manifest" -outputresource:"E:Program FilesAutodeskInventor 2012SDKDeveloperToolsSamplesVB.NETAddInsSimpleAddIninSimpleAddIn.dll";#2
" exited with code 9009. SimpleAddIn
View 5 Replies
View Related
Apr 15, 2013
I am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies
View Related
Jul 4, 2013
i coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
View 3 Replies
View Related
May 16, 2012
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
View 9 Replies
View Related
Oct 24, 2011
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.
View 3 Replies
View Related
Aug 10, 2011
Just installed Map 3D 2012 and Bluebeam Revu cad version. Restarted m'puter and Message pops up, then CAD closes. Very counter productive.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
View 1 Replies
View Related
Apr 16, 2013
Due to a "FATAL ERROR: Unhandled c0000417h" my AutoCAD 2014 crashes every time I try to print a dwg to pdf.
It seems to only occur if I print one of any number of files within a particular/specific folder.
Things I am still able to do:
I can publish the very same drawings to pdf.
I can print a dwg to pdf if it is within a different folder.
View 3 Replies
View Related
Nov 19, 2013
I am using AutoCad 2000 on Windows XP - and have had no problems for years. today - I went to print out a drawing, and when clicking on plot - or plot preview, it gave me: Fatal Error: Unhandled Access Violation Reading 0x0000 Exception at 5e2c36h. I thought it was just this one file, but none of the existing drawings I open will print. And they have always printed.
View 9 Replies
View Related
Feb 6, 2012
To be more precise: Fatal error unhandled access violation writing 0x0024 Exception at 7776e4b4h
I've set up a drop down menu with various page setups coming from another file (-psetupin).
If I initiate a page setup for our Plotter or Printer, everything works fine. If I initiate a page setup for the 'dwg to pdf.pc3', I get the error listed above. I don't understand why, it worked fine not too long ago. Also, if I manually create a page setup with the same 'dwg to pdf.pc3' it works fine...
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
View 8 Replies
View Related
Apr 14, 2013
I have recently moved to 2014Lt.
When I open a second file both go super slow. I didnt have this problem with 2013.
It often then crashes the recent error no is d686468fh.
View 2 Replies
View Related
Sep 6, 2012
I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
View 7 Replies
View Related
Nov 24, 2013
I am getting Fatal error at the explode method in the following highlighed (red) code.
public class ExplodeDynamicBlocks
{
[CommandMethod("EDB")]
[Code].....
Also, if possible, how to combine two objectidcollection into one?
View 9 Replies
View Related
Nov 7, 2012
I have Autocad LT 2007 running on a PC with Windows 7.I am having problem with creating layers or just working with layers.I get this error message:
Fatal Error: Unhandled e06d7363h Exception at 7585c41fh
The second part of the message "at 7585c41fh" is different sometimes, but the first part is always the same.Then Autocad shuts down.
View 7 Replies
View Related
Nov 12, 2013
I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies
View Related
Apr 19, 2012
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies
View Related
Dec 9, 2013
So I got a problem with a Drawing. I got 2 layouts from the same model space, the first one can be converted just as usual but when I`m trying to plot the second one I`m getting a fatal error. I already tried to copy it into a new layout and tried different PDFcreators such as PDF24 but it`s always the same. There are no special elements or such things in the layout. Ok so I just found out that the problem is the transparency because i can plot it without but i never had that problem before, i even plotted a drawing with transparency today.
(pic of the error attached)
View 2 Replies
View Related
Mar 16, 2012
I encountered a problem, when I try to use GetString with Keywords
Dim optString As New PromptStringOptions("Zadaj nazov: ")optString.Keywords.Add("Vypisat")Dim resPrompt As PromptResult = ed.GetString(optString)
AutoCAD crashes with FATAL ERROR on the last line.
View 9 Replies
View Related
Nov 15, 2013
Sometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.
View 9 Replies
View Related
Jun 14, 2012
I'm working in Civil 3D 2013 and am attempting to bring in notes and blocks from a .dwt, using DesignCenter. As soon as I drag a block into my current drawing I receive a fatal error message and Civil 3D closes. I do get the option to save a recover file.
View 8 Replies
View Related
Jan 30, 2013
I have a function that allows the user to set a color on a modified dimension (only the text of it). However, when this function is enabled and the user wants stretch the dimension, Autocad make a fatal error and close.
Here is where it crash (in red) :
public overridebool WorldDraw(Autodesk.AutoCAD.GraphicsInterface.Drawable drawable, Autodesk.AutoCAD.GraphicsInterface.WorldDraw wd)
{
if (showText || resetText)
{
Dimension dm = (Dimension)drawable;
dm.UpgradeOpen();
[code].....
I added this (in red) but it will just turn in round in my code with another function and made the fatal error still :
Dimension dm = (Dimension)drawable;
if(!dm.IsWriteEnabled)
{
dm.UpgradeOpen();
dm.Dimclrt = dimTColor;
dm.DowngradeOpen();
}
View 2 Replies
View Related
Aug 9, 2012
I cannot print my layouts to pdf. Every time there is a fatal error.
It goes like this:
1. Open any drawing.
2. Select any layout.
3. File > Plot > Select PDF as printer/plotter
4. Click OK
5. Plot job progress bar appears
6. Fatal Error Message
7. Total crash, AutoCAD closes
FATAL ERROR: Unhandled c000000dh Exception at 237eb667h
It is with every drawing, different drawings, every time. It started suddenly.
I am using LT 2013. I used to have 2008. I got similar errors using 2008. I uninstalled it (after trying repair reinstall, which failed to correct the problem) and reinstalled windows, and upgraded to 2013. The problem was gone for a time and has just now restarted.
View 4 Replies
View Related
Feb 8, 2012
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.
View 5 Replies
View Related
