AutoCAD LT :: Fatal Error Messages
May 16, 2012
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
View 9 Replies
ADVERTISEMENT
Jan 9, 2012
My co-worker and I have been getting Fatal Error messages a lot recently and there doesn't seem to be any consistent task that is causing them. We've been getting the error messages with multiple different commands and multiple softwares such as ACAD 2009, ACA 2012, and ACAD 2012. We can't seem to pin down anything specific that is causing the crashes. Fortunately with my crashes I can simply restart the software and everything is ok. However, there have been a couple of times that my co-worker's system crashed and he had to have ACAD 2009 re-installed (this is a major pain because we have to go through our IT department to get anything done on our systems). We have different computers. About the only common thing between us is that we are both running the same version of Windows XP on 32-bit systems.
View 3 Replies
View Related
Feb 25, 2008
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies
View Related
Oct 14, 2013
When I open Photoshop CC I get an error messaage that the above dll is missing. I can get rid of the error message and PS opens normally. I understand this might be a .dll associated with Apple products such as iTunes, which I don't have on my machine. Is this .dll necessary and, if not, how do I get rid of the error messages.
View 2 Replies
View Related
Mar 7, 2012
I use photoshop CS5 Extended version 12.1 x64 at work when designing banners. The process involves me using pre-existing photoshop templates that are used over and over again. These templates have been created God knows when and as such there are layers with fonts that are missing but they are hidden and unimportant for my task. Everytime i open the templates I get an Font Missing error message that reads as such:
"Some text layers contain fonts that are missing. These layers will need to have the missing fonts replaced before they can be used for vector based output."
I am aware of this and I would prefer not be reminded every time I open a template, having to confirm that I understand the issue, especially when I'm opening 10-20 templates at a time. So my question is, is there a way to set settings in such a way that this error message stops appearing. I will note thate e also use a Universal Type client for Fonts, which replaces the need for photoshop fonts.
If I can find a solution to deactivate this error message, it would definitely speed up the process of opening files.
View 2 Replies
View Related
Oct 17, 2012
Photoshop :: Get error messages when it loads. What's the problem?
View 2 Replies
View Related
Jun 2, 2013
I keep getting dynamic link messages when trying to open video in Photoshop
View 2 Replies
View Related
Feb 19, 2014
Previously, my LR5 worked seamlessly with both the most current versions of Photomatix Pro and HDR Efex Pro 2. Then neither program worked. Photomatix would accept images from LR5 would process them sometimes but wouldn't send them back to LR5. Sometimes Photomatix would allert me that some of the exported images had the same data - not true. Sometimes 2+,1+, 0, 2- & 1- brackets were interpreted as having a 3+ image. With the Nik software I'd get messages like "Launching external application failed" or "The command 'HDR Efex Pro 2' is not currently available. I contacted Google and we determined that the Nik software worked when opened in Photoshop CS5. It appears that LR5 may be the culprit. I uninstalled and reinstalled LR5. Nothing changed. The Photomatix and Efex Pro 2 plugins reappeared without me doing anything so I wasn't sure I got a clean reinstall.
View 2 Replies
View Related
Jan 8, 2013
I use a Windows 7 64 bit Dell at home and at work. Both have Photoshop CS6 (not extended). This week when I saved files at home using file compatiblity (since co-workers in my office are on CS 5.1) and FTPed them from home to the work network I ran into all sorts of issues.
5.1 users reported getting all sorts of errors including...The document contains unknown data which will be discarded to keep layers editable... and another one about missing "color books"
I read about cross version problems with shapes with the new CS6 vector strokes applied. Sure enough, when I sent CS 5.1 co-workers small test files by email they could open all of them but the one with the shape with CS6 vector stroke. So I went back to the larger PSDs and removed the strokes from any shapes, but the office still could not open the files.
I too, even though on the same CS6 product get an error "There was a problem reading the layer data. Read the composite data instead?" If I click to do so I get another error "Could not complete your request because the file is not compatible with this version of Photoshop" which is simply not true wince both are CS6
View 3 Replies
View Related
Nov 3, 2013
I get this message when I start PS. " There is no disk in the drive. insert a disk into the drivedriveharddiskdr2"...When I accept this message PS continues to load as normal, However
If I try to save a file using "Save for Web and Devices" I get the same message as above but when I accept this message I get another message "The operation could not be completed. The System cannot find the path specified."All other functions of PS appear to work normally.
I have a Quad 4 processor with 8gb Ram with Windows 7
View 1 Replies
View Related
Jun 2, 2013
In PS CS3, attempting to save an ASE file with a swatch selection that contains an illegal color (e.g., an HSB or PANTONE color) results in an error message. You must delete the offending color to save the swatch exchange file.
CS6 implies that the color's simply omitted from the ASE file. Is that true, or does the save process fail the way it does in CS3?
View 6 Replies
View Related
Dec 18, 2012
Every time I start up photoshop I get the following dialog box showing up:
And the following comes up with any filter i try to use:
I have tried re-installing the softwear, unfortunately that didn't fix the issue.
View 2 Replies
View Related
Aug 4, 2012
I use CS6, and today I followed a tutorial on how to make a robot on a picture and at first everything went ok but when I was almost done and tried to make a selection with the lasso tool I all of a sudden got an error message that says "Warning: No pixels are more than 50% selected. The selection edges will not be visible." And when I press OK my selection is not there. I had no problem when I started the project but now it won't work.
And now I get this error messages every time I try to make a selection and it doesn't matter if I use the pen, marque or whatever.
View 3 Replies
View Related
Aug 1, 2009
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies
View Related
Apr 25, 2013
I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
View 4 Replies
View Related
May 10, 2013
I set mental ray render. When i first time open material/map browser and icons from maps are loading i have this error/warn message. Icons are black circles.
[URL]
View 6 Replies
View Related
Sep 4, 2013
moving my LR files to an external hard drive without the dreaded question mark or missing files message. I thought it would be easy.........I must be doing something wrong. I want to move some 30,000 photo files to external and work off external in the future. I purchased a Lacie 4 TB hard drive.
I would like step-by-step instructions.?
View 2 Replies
View Related
Apr 15, 2013
I am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies
View Related
Jul 4, 2013
i coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
View 3 Replies
View Related
Oct 24, 2011
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.
View 3 Replies
View Related
Aug 10, 2011
Just installed Map 3D 2012 and Bluebeam Revu cad version. Restarted m'puter and Message pops up, then CAD closes. Very counter productive.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
View 1 Replies
View Related
Apr 16, 2013
Due to a "FATAL ERROR: Unhandled c0000417h" my AutoCAD 2014 crashes every time I try to print a dwg to pdf.
It seems to only occur if I print one of any number of files within a particular/specific folder.
Things I am still able to do:
I can publish the very same drawings to pdf.
I can print a dwg to pdf if it is within a different folder.
View 3 Replies
View Related
Nov 19, 2013
I am using AutoCad 2000 on Windows XP - and have had no problems for years. today - I went to print out a drawing, and when clicking on plot - or plot preview, it gave me: Fatal Error: Unhandled Access Violation Reading 0x0000 Exception at 5e2c36h. I thought it was just this one file, but none of the existing drawings I open will print. And they have always printed.
View 9 Replies
View Related
Feb 6, 2012
To be more precise: Fatal error unhandled access violation writing 0x0024 Exception at 7776e4b4h
I've set up a drop down menu with various page setups coming from another file (-psetupin).
If I initiate a page setup for our Plotter or Printer, everything works fine. If I initiate a page setup for the 'dwg to pdf.pc3', I get the error listed above. I don't understand why, it worked fine not too long ago. Also, if I manually create a page setup with the same 'dwg to pdf.pc3' it works fine...
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
View 8 Replies
View Related
Apr 14, 2013
I have recently moved to 2014Lt.
When I open a second file both go super slow. I didnt have this problem with 2013.
It often then crashes the recent error no is d686468fh.
View 2 Replies
View Related
Sep 6, 2012
I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
View 7 Replies
View Related
Nov 24, 2013
I am getting Fatal error at the explode method in the following highlighed (red) code.
public class ExplodeDynamicBlocks
{
[CommandMethod("EDB")]
[Code].....
Also, if possible, how to combine two objectidcollection into one?
View 9 Replies
View Related
Nov 7, 2012
I have Autocad LT 2007 running on a PC with Windows 7.I am having problem with creating layers or just working with layers.I get this error message:
Fatal Error: Unhandled e06d7363h Exception at 7585c41fh
The second part of the message "at 7585c41fh" is different sometimes, but the first part is always the same.Then Autocad shuts down.
View 7 Replies
View Related
Nov 12, 2013
I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies
View Related
Apr 19, 2012
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies
View Related
Dec 9, 2013
So I got a problem with a Drawing. I got 2 layouts from the same model space, the first one can be converted just as usual but when I`m trying to plot the second one I`m getting a fatal error. I already tried to copy it into a new layout and tried different PDFcreators such as PDF24 but it`s always the same. There are no special elements or such things in the layout. Ok so I just found out that the problem is the transparency because i can plot it without but i never had that problem before, i even plotted a drawing with transparency today.
(pic of the error attached)
View 2 Replies
View Related
