I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.
View 4 Replies View RelatedI am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
View 1 Replies View RelatedWhy I am receiving the error when trying to resave my drawing? It aborts AutoCAD altogether and doesn't save the drawing.
-FATAL ERROR: Unhandled Access violation reading 0xbfbc4748 Exception at e84c7bd9h.
I have a medium size 3d drawing that displays the following error every time i click "Print Preview"
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
with both "0x000a" and "2653281h" not always displaying the same values. Other 3d and 2d drawings preview with no problems, and i can navigate and make changes in the problem file without any errors.
We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies View RelatedEnvironment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
I am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies View Relatedi coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.
Just installed Map 3D 2012 and Bluebeam Revu cad version. Restarted m'puter and Message pops up, then CAD closes. Very counter productive.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
Due to a "FATAL ERROR: Unhandled c0000417h" my AutoCAD 2014 crashes every time I try to print a dwg to pdf.
It seems to only occur if I print one of any number of files within a particular/specific folder.
Things I am still able to do:
I can publish the very same drawings to pdf.
I can print a dwg to pdf if it is within a different folder.
I am using AutoCad 2000 on Windows XP - and have had no problems for years. today - I went to print out a drawing, and when clicking on plot - or plot preview, it gave me: Fatal Error: Unhandled Access Violation Reading 0x0000 Exception at 5e2c36h. I thought it was just this one file, but none of the existing drawings I open will print. And they have always printed.
View 9 Replies View RelatedTo be more precise: Fatal error unhandled access violation writing 0x0024 Exception at 7776e4b4h
I've set up a drop down menu with various page setups coming from another file (-psetupin).
If I initiate a page setup for our Plotter or Printer, everything works fine. If I initiate a page setup for the 'dwg to pdf.pc3', I get the error listed above. I don't understand why, it worked fine not too long ago. Also, if I manually create a page setup with the same 'dwg to pdf.pc3' it works fine...
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
I have recently moved to 2014Lt.
When I open a second file both go super slow. I didnt have this problem with 2013.
It often then crashes the recent error no is d686468fh.
I am getting Fatal error at the explode method in the following highlighed (red) code.
public class ExplodeDynamicBlocks
{
[CommandMethod("EDB")]
[Code].....
Also, if possible, how to combine two objectidcollection into one?
I have Autocad LT 2007 running on a PC with Windows 7.I am having problem with creating layers or just working with layers.I get this error message:
Fatal Error: Unhandled e06d7363h Exception at 7585c41fh
The second part of the message "at 7585c41fh" is different sometimes, but the first part is always the same.Then Autocad shuts down.
I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.
View 4 Replies View RelatedI'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedSo I got a problem with a Drawing. I got 2 layouts from the same model space, the first one can be converted just as usual but when I`m trying to plot the second one I`m getting a fatal error. I already tried to copy it into a new layout and tried different PDFcreators such as PDF24 but it`s always the same. There are no special elements or such things in the layout. Ok so I just found out that the problem is the transparency because i can plot it without but i never had that problem before, i even plotted a drawing with transparency today.
(pic of the error attached)
I encountered a problem, when I try to use GetString with Keywords
Dim optString As New PromptStringOptions("Zadaj nazov: ")optString.Keywords.Add("Vypisat")Dim resPrompt As PromptResult = ed.GetString(optString)
AutoCAD crashes with FATAL ERROR on the last line.
Sometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.
View 9 Replies View RelatedI'm working in Civil 3D 2013 and am attempting to bring in notes and blocks from a .dwt, using DesignCenter. As soon as I drag a block into my current drawing I receive a fatal error message and Civil 3D closes. I do get the option to save a recover file.
View 8 Replies View RelatedI have a function that allows the user to set a color on a modified dimension (only the text of it). However, when this function is enabled and the user wants stretch the dimension, Autocad make a fatal error and close.
Here is where it crash (in red) :
public overridebool WorldDraw(Autodesk.AutoCAD.GraphicsInterface.Drawable drawable, Autodesk.AutoCAD.GraphicsInterface.WorldDraw wd)
{
if (showText || resetText)
{
Dimension dm = (Dimension)drawable;
dm.UpgradeOpen();
[code].....
I added this (in red) but it will just turn in round in my code with another function and made the fatal error still :
Dimension dm = (Dimension)drawable;
if(!dm.IsWriteEnabled)
{
dm.UpgradeOpen();
dm.Dimclrt = dimTColor;
dm.DowngradeOpen();
}
I cannot print my layouts to pdf. Every time there is a fatal error.
It goes like this:
1. Open any drawing.
2. Select any layout.
3. File > Plot > Select PDF as printer/plotter
4. Click OK
5. Plot job progress bar appears
6. Fatal Error Message
7. Total crash, AutoCAD closes
FATAL ERROR: Unhandled c000000dh Exception at 237eb667h
It is with every drawing, different drawings, every time. It started suddenly.
I am using LT 2013. I used to have 2008. I got similar errors using 2008. I uninstalled it (after trying repair reinstall, which failed to correct the problem) and reinstalled windows, and upgraded to 2013. The problem was gone for a time and has just now restarted.
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.