AutoCAD Civil 3D :: 2014 To 2013 Causes FATAL ERROR When Drawing Has Infill Grading
May 23, 2013
We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 5 Replies
ADVERTISEMENT
Dec 24, 2013
"An infill grading has no criteria applied to it. Any area bounded by feature lines or lot lines that is not already a grading can be converted to an infill grading."
So given an area enclosed by a feature line, an infill grading can be created. Using the same features line, an feature line grading can also be created. what is the difference between these two surfaces? They both have no criteria applied to them.
View 9 Replies
View Related
Oct 9, 2013
I am creating a simple, and although it's large (100 million gallons), the grading object routine is relatively simple. I have the inside crest of the berm and I'm grading down 40-50 feet. Everything is fine until I infill the bottom of the basin and then the infill line around the perimeter of the bottom has two points that are way below the actual bottom, like another 100+ feet. The two points are on opposite sides of the basin so obviously it throws off the whole resulting surface and causes earthwork calculations to be invalid.
I've tried various sizes and shapes, having the crest feature line both "open" (with a tiny gap) and "closed", straight and arc shapes for the crest, grading to elevation and to relative elevation, and probably more. This problem seems to appear in each scenario.
Version: Civil 3D 2012 on a Dell PC
View 1 Replies
View Related
Oct 17, 2013
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
View 1 Replies
View Related
Apr 3, 2013
I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies
View Related
Jun 11, 2013
Everytime AutoCAD 2014 shuts down I get a fatal error with the d3b42920h. It doesn't seem to be the drawing that is erroring because it doesn't ask for a recovery file to be saved, but the program it'self.
When SDI is set to 1 everytime you open a new drawing the error occurs.
We do have a company wide network deployment with customised settings for over 40 machines and it only happens on certain machines. I don't want to restore default settings as and re-load our company settings on every machine this happens.
View 1 Replies
View Related
Oct 12, 2012
creating infill at the grading example from the civil 3d tutorial "filling holes in a grading" (grading-6.dwg) failes when selecting the area to fill. The command finshes whithout changing the model. There is no diamond symbol displayed.
Why i am not able to select the area?
View 9 Replies
View Related
Aug 16, 2013
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies
View Related
Jul 10, 2013
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
View 1 Replies
View Related
Aug 30, 2012
Why I am receiving the error when trying to resave my drawing? It aborts AutoCAD altogether and doesn't save the drawing.
-FATAL ERROR: Unhandled Access violation reading 0xbfbc4748 Exception at e84c7bd9h.
View 2 Replies
View Related
Dec 12, 2013
Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
View 2 Replies
View Related
Dec 30, 2013
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
View 4 Replies
View Related
Nov 5, 2013
I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.
View 4 Replies
View Related
May 11, 2012
I have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
View 4 Replies
View Related
Jun 26, 2013
We are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
View 3 Replies
View Related
Dec 9, 2013
I recently created a grading file in autocad civil 3d 2014 that contains grading objects. When I try to open the file on another computer that is using autocad civil 3d 2013, the file will not open and I get a fatal error. I audited, purged, recovered and tried about everything.
View 3 Replies
View Related
Jul 3, 2013
why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies
View Related
Sep 6, 2012
I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
View 7 Replies
View Related
Jun 28, 2012
I am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
View 1 Replies
View Related
Apr 19, 2012
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies
View Related
Jan 4, 2013
I have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
View 3 Replies
View Related
Jan 31, 2012
I have a medium size 3d drawing that displays the following error every time i click "Print Preview"
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
with both "0x000a" and "2653281h" not always displaying the same values. Other 3d and 2d drawings preview with no problems, and i can navigate and make changes in the problem file without any errors.
View 3 Replies
View Related
Apr 15, 2013
We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies
View Related
Nov 13, 2012
I installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
View 3 Replies
View Related
Aug 27, 2013
AutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies
View Related
Jun 18, 2012
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies
View Related
Apr 17, 2013
I' m working whit autocad 2013.
when I copy a plan from one file to another different file I have a fatal error: C0150014H fc0135fah
View 1 Replies
View Related
Sep 4, 2013
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies
View Related
Jun 19, 2012
today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies
View Related
Aug 7, 2012
When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies
View Related
Oct 1, 2013
Every time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
View 2 Replies
View Related
