AutoCAD 2013 :: Fatal Error Opening Drawing From Network Share
Dec 12, 2013
Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
View 2 Replies
ADVERTISEMENT
Dec 30, 2013
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
View 4 Replies
View Related
Sep 4, 2013
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies
View Related
Aug 30, 2012
Why I am receiving the error when trying to resave my drawing? It aborts AutoCAD altogether and doesn't save the drawing.
-FATAL ERROR: Unhandled Access violation reading 0xbfbc4748 Exception at e84c7bd9h.
View 2 Replies
View Related
Sep 6, 2012
We have a new windows 7 PC x64 with Illustrator CS6, when we open a file from our server share, it only utilises 25% of the available network bandwidth to open the file.
On an older XP 32 bit machine it utilises the full bandwidth ie 100% so the file opens up to 6 times faster.
When I copy the file from the network to either machine machine it copies fine and uses 99% of the network speed.
What can I do to my new machine to speed the transfer of data in illustrator?
View 1 Replies
View Related
May 23, 2013
We just installed 2014 on two work stations and saved a few Civil 3D files with it. When we try to open these Civil 3D drawings in 2013 they crash with a FATAL ERROR.
The last few lines on the command line shows: Loading Modeler DLLs.
Modeling Operation Error: Operation unsuccessful.
Modeling Operation Error: Operation unsuccessful.
This error seems to only happen with drawings that have infill grading. I tested it with a drawing with just poly lines and it worked fine. I then converted those poly lines into feature lines using 2014 and it opened fine in 2013. I then added an infill to the feature line region in 2014 and it crashes in 2013.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 5 Replies
View Related
May 22, 2012
We are having trouble with one of our C3D 2013 seats crashing (giving a fatal error) when trying to edit or do anything with a pipe network. The drawings work fine on other computers. I am trying to keep from having to remove and reinstall the software.
View 5 Replies
View Related
May 15, 2012
I get an error every time I open any drawing after it has been saved in 2013. Opening a dwg that was created in an earlier version does not give the error, but after I save it in 2013, it does.
If I create a new dwg in 2013, save it, close it and then open it I don't get the error the first time. But then if I save that dwg again, I will get it the next time I open it.
The exact error is:
One error was found in the drawing file during open. Would you like to cancel this open?It is recommended you cancel the open and run the RECOVER command on the drawing file.
I run the recover command. It says it found, fixed, and erased 1 error. I save, close, and reopen the drawing and the error still appears every time.
View 2 Replies
View Related
Jan 12, 2012
I have started receiving the following error:
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
Map3D 2012
Intel Core2 Duo
2.66ghz
3gb ram
View 5 Replies
View Related
May 11, 2012
I just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies
View Related
Dec 2, 2012
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
View 1 Replies
View Related
Aug 29, 2011
using autoCAD 2009 everytime I open up the Layer Properties Manager, it causes a Fatal Error and autoCAD to shut down, this is a first and need need to know how to solve this problem or at least a diagnose.
View 1 Replies
View Related
Jun 5, 2012
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies
View Related
Jul 3, 2013
why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies
View Related
Sep 6, 2012
I started the drawing I have been working on for the last couple of days. I went to save it and this is what I got:
fatal error: unhandled access violation reading 0xbff247f8 exception at e47c7bd9h.
Every time I reload the program the numbers are different.
When I load a different drawing I don't have the problem.
View 7 Replies
View Related
Mar 6, 2012
I keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
View 1 Replies
View Related
Nov 5, 2013
I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.
View 4 Replies
View Related
Jun 28, 2012
I am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
View 1 Replies
View Related
Apr 19, 2012
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies
View Related
Jan 4, 2013
I have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
View 3 Replies
View Related
Jan 31, 2012
I have a medium size 3d drawing that displays the following error every time i click "Print Preview"
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
with both "0x000a" and "2653281h" not always displaying the same values. Other 3d and 2d drawings preview with no problems, and i can navigate and make changes in the problem file without any errors.
View 3 Replies
View Related
Apr 15, 2013
We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies
View Related
Nov 13, 2012
I installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
View 3 Replies
View Related
Aug 27, 2013
AutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies
View Related
Jun 18, 2012
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies
View Related
Apr 17, 2013
I' m working whit autocad 2013.
when I copy a plan from one file to another different file I have a fatal error: C0150014H fc0135fah
View 1 Replies
View Related
Jun 19, 2012
today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies
View Related
May 11, 2012
I have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
View 4 Replies
View Related
Oct 17, 2013
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
View 1 Replies
View Related
Apr 3, 2013
I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies
View Related
Jun 11, 2013
Everytime AutoCAD 2014 shuts down I get a fatal error with the d3b42920h. It doesn't seem to be the drawing that is erroring because it doesn't ask for a recovery file to be saved, but the program it'self.
When SDI is set to 1 everytime you open a new drawing the error occurs.
We do have a company wide network deployment with customised settings for over 40 machines and it only happens on certain machines. I don't want to restore default settings as and re-load our company settings on every machine this happens.
View 1 Replies
View Related
