Illustrator :: Opening Files From Network Share?
Sep 6, 2012
We have a new windows 7 PC x64 with Illustrator CS6, when we open a file from our server share, it only utilises 25% of the available network bandwidth to open the file.
On an older XP 32 bit machine it utilises the full bandwidth ie 100% so the file opens up to 6 times faster.
When I copy the file from the network to either machine machine it copies fine and uses 99% of the network speed.
What can I do to my new machine to speed the transfer of data in illustrator?
View 1 Replies
ADVERTISEMENT
Dec 12, 2013
Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
View 2 Replies
View Related
Apr 10, 2013
It has been reported and reproduced by Support, an issue whereby Photoshop .PSD files disappear when they’re saved to a network file share. Upon initial investigations Support have observed the following behaviour when saving a Photoshop file.
The document is initially saved as a new file on the file share.The original .PSD file is deleted on the file share.The newly created file is renamed to the same name as the original file.
An issue often arises when steps 1 and 2 complete however step 3 fails. When a file is reported by users as having disappeared, the new file created in step 1 can be renamed from .00_ to the original *.PSD file name on the server as the *.00_ files are normally hidden by the desktop operating system. This allows people to see and open the file from both PC’s and MAC’s using AFP and SMB protocols.
A related issue often reported by users is that they receive an error message “Could not save as” when trying to save a .PSD file. Troubleshooting the issue confirms that the user is able to save the file if they perform a “Save As” operation in Photoshop.
From the reported problems and observations there is clearly an issue with how Photoshop performs a file save operation further exacerbated by the fact the process doesn’t fail safely.
View 2 Replies
View Related
Mar 16, 2012
We have a bunch of cad files that are loaded onto a sharepoint. Some these users who have read access only are having difficulties opening the files in autocad LT 2012 because .dwl and .dwl2 files trying to be created on the sharepoint site. Is there a way to redirect these files to their locally to their computer? I would like to avoid giving the users write permissions to the site.
View 1 Replies
View Related
Sep 23, 2011
I've created some tool palettes I want to share across a network. After loading the tool palettes at a work station, I have to manually update the images for the blocks. Is there a way to have this done automatically?
View 0 Replies
View Related
Mar 4, 2007
Is it possible to share Lightroom with one other individual on a network? We need to have one database with images we can share and maintain together.
View 16 Replies
View Related
Feb 9, 2014
I'm using Lightroom 5.3 on Mac OS X Mavericks.
My photos are located on a Mac Mini via a file share on my home wired network.
I can open and access (read/write) all the images with Finder.
However, if I try to import the photos into LightRoom, it says "The files appear to be unsupported or damaged."
If I copy the files to my local computer, they import fine! But I need to keep my files on the network share; my laptop doesn't have enough space for everything.
View 6 Replies
View Related
Oct 1, 2013
Is there any way to share DWG file in local network and work in it in same time.
View 9 Replies
View Related
May 19, 2012
I want to have an application settings file stored centrally on a network drive. In the past I have used INI files, and for a Windows app would now use an app.exe.config XML file. My question is: what is the preferred technique for storing shared settings centrally for an AutoCAD .dll plug-in? It seems even for a full Windows app that the app.exe.config file can't be located on a network drive, but I could be mistaken. In any case that doesn't appear an option for a .dll plug-in. Everyone comments that INI files "are so 90s", but I can't see an alternative.
View 2 Replies
View Related
Nov 21, 2013
In my (large) Lightroom 5.2 (Windows) library I have three instances of, essentially, the same network share (a Drobo NAS) which appear separately in the library.
One appears as Share (\nas) L:, one as \nasShare and one as \nasshare. The contents of the share are spread randomly across the three - so one might contain the folders seriesevent1, seriesevent4 and seriesevent5 and another seriesevent2, seriesevent3 and seriesevent6.
Is there an easy way to convince Lightroom that they're all the same physical location and merge them in the library? No amount of dragging, dropping, importing or synchronization seems to have had any effect so far!
View 3 Replies
View Related
Jun 16, 2011
in Corel Draw X4, we can use the scrapbook docker to see thumbnail of locals files, but when this files are on a network share or if this network share is mapped to local drive, thumbnails does not show up. But when I use File/Open to this network share or mapped drive, thumbnails are ok.
I also heard that in X5 scrapbook is depreciated, is there an alternative?
View 2 Replies
View Related
Jun 30, 2012
I am a technology consultant with a client using Civil 3D 2012.
They moved from 2008 to 2012, and we've noticed something a bit odd: browsing network shares from within Autocad's file explorer is significantly slower than doing the same in Windows Explorer. By "slower", I mean going from directory to directory shows noticeable lag before the directory contents are displayed, whereas in Windows Explorer there isn't any. They don't recall having this issue with 2008.
All workstations are Windows 7, and the "server" where the shares live is running XP Pro (very small firm with 2-3 people hitting the "server" at any given time - 3 is rare). I've updated Civil 3d with the latest service pack (2) as of this writing hoping it might resolve the issue, but it doesn't seem to.
View 7 Replies
View Related
Apr 11, 2011
How to share tool palettes with office members across a network. There seems to be a fair amount written about this but none of it seems to be working for me. Any method of doing this that works and if so do the palettes update automatically for everyone else if I export an update?
View 8 Replies
View Related
Jun 12, 2013
Mac OS 10.6
Illustrator CS6
Illustrator CS6 hangs (spinning beach ball) when saving files to the computer's local HD while having multiple server share points mounted.
I am NOT opening or saving the file to or from a server. The server is mounted so that I can move my saved file to it once complete.
Unmounting the servers fixes the problem and Illustrator CS6 returns to being normal (not causing a spinning beach ball).
This is repeatable, not intermittent.
View 2 Replies
View Related
Nov 22, 2012
[URL] We have a client who are using Adobe Acrobat 9 and have .PDF's saved in a Share Folder. Is the creator of the document but is still faced with the read only prompt when trying to save the document after making an edit (e.g rotating). Upgrading to Adobe Acrobat 9 isn't an option.
Folder permissions in both Share and NTFS is okay. User's profile has full control of the folder it is being saved in. I've also ensured the reading pane is Windows Explorer is off when they're opening it.
Have run a repair on Adobe Acrobat 9 and tried with other documents with the same result.Saving locally does not have the same issue. using .PDF for Adobe Acrobat 9 in a Share Folder environment.
Server is SBS2008 and user's PC is Windows 7 Professional.
View 2 Replies
View Related
Mar 17, 2013
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
View 7 Replies
View Related
Apr 7, 2013
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
View 3 Replies
View Related
Dec 17, 2013
Even though they are saved as AI. On other computers it opens properly. The few files I can open, I can't select using the selection tool because of a clipping mask I cannot get rid of.
View 2 Replies
View Related
Aug 29, 2013
I've been using Illustrator for a few year now, but I've never had this problem before. Recently, I went to open up some files I had been working on. The problem was, when they opened, the files were blank. There was nothing on them.
When I open pdf and eps files, they're fine, it's just ai files that open up blank.
I ran a quick test where I created a new file and saved both as an ai and eps file. I closed it and quit Illustrator. I then re strated the program and opened the test file, and lo and behold, the ai file opened up blank, but the eps file was fine.
I'm on Mac OS X, running Illustrator CS6
View 7 Replies
View Related
Mar 9, 2013
I installed a OKI C301dn printer this week, thats when the problem first occured (not sure if the printer has anything to do with the problem, but it's the only 'change' i made) Most .ai files will open normally, except the one I need.The specific ai file (contains a linked jpg and a linked psd file) opens normally on my other machines (Mac and Pc) I removed the printer and CS5, used the Adobe cleaning tool and reinstalled CS5 but the problem remains. (I also did a memory check, registry clean) I'm using Win7 64bit on a i7 system with 8gb
View 2 Replies
View Related
Sep 12, 2013
What Adobe drawing program will open AutoCAD DWG files made using a more recent AutoCAD application than AutoCAD 2007?
View 3 Replies
View Related
Sep 18, 2013
I posted another thread yesterday trying to figure this issue out. Illustrator does NOT actually crash, instead it hangs and simply becomes unresponsive when trying to open a handful of files. I have been reading other threads similar to this and have addressed all of the issues that seemed to have resolved the problem for other people, i.e. reset preferences, reinstalled illlustrator several times and removed preferences, etc. I do have a Wacom Bamboo tablet, but I have removed the driver and files from my Mac. But, it seems odd that the Wacom plugin would cause only a select handful of files to become unresponsive. I have a lot of work that needs to be done but I can't take a step further without Illustrator working properly!
[URL]
View 9 Replies
View Related
Sep 25, 2012
i have a Mac OSX V.10.7.5 and 3.4 GHz i7 8GB Ram.
Indesign and Photoshop open files very quickly, but illustrator while opening any type of file—whether it's an AI Cs6 file or EPS file or SVG file—there is at least a 20 second delay.
View 1 Replies
View Related
Oct 21, 2013
I have a user that is attempting to open multiple files at once in IllustratorCC. When you select multiple files and right click -> open, it only opens one file. If she double clicks a file while there is a file open in illustrator, nothing happens. The only way she has found to open multiple files is to go to file->open->browse to location for each file. This is quite time consuming. Is there anyway to enable being able to quickly open multiple files similiar to how older versions of Illustrator did?
View 14 Replies
View Related
Jan 29, 2014
When I try and open or place an EPS file I am getting a text import option box... then Illustrator crashes.
View 1 Replies
View Related
Mar 3, 2014
When I try and open an Illustrator file, I get the error message "can't open the illustration".
View 2 Replies
View Related
Jan 15, 2014
We are having an issue with CS4 and CS6 with a couple of users who are using Windows 7 64bit. Previously the users were using CS4 on Windows XP 32 bit.
The program seems to open ok and the user is able to create, save and open new files, the issue seems to be when the users try to open files that they previously created. The behavior they see is that the files take between 5 and 10 mins to open (even if stored locally) and the programs hangs when they then try to do anything with the files.
The are using the same hardware, the only difference being that the OS has been migrated to Windows 7 64 bit. CS4 and CS6 were then installed cleanly onto the machines.The users have the same issue with both CS4 and CS6 with their existing files.
View 1 Replies
View Related
Oct 24, 2013
I installed Mavericks yesterday ... Am having issues with Illustrator. First it wouldn't open and had to runt he Java install, that took care of that. I am able to make new files without problem and open EPS files, but cannot open existing AI files UNLESS going to File > Open. If I double click on an AI file I get the error "The appliation can't be found"
I am not running any 3rd party plug ins.
View 4 Replies
View Related
Jun 14, 2012
I have the Creative Suite 5.5. Illustrator starts, but trying to open (.ai or .pdf) or save a file causes it to crash.
I have deleted the preferences folder.
used uninstaller to uninstall complete Creative Suite package. Used Adobe Creative Suite Cleaner Tool.app afterwards. Reinstalled. Still it crashes.
Photoshop, InDesign, Acrobat Pro all seem fine.
Process: Adobe Illustrator [17332]
Path: /Applications/Adobe Illustrator CS5.1/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 39 (15.1.0)
Code Type: X86 (Native)
Parent Process: launchd [122]
Date/Time: 2012-06-14 16:05:18.973 -0600
OS Version: Mac OS X 10.7.4 (11E53)
Report Version: 9
[code]....
View 12 Replies
View Related
Jan 9, 2014
I try to double click on a file to open in illustrator, which is already open and running in the background and I get this message. Can't open the illustration. There is not enough room for the window. Increase document area and try again. The window was full screen, but after clicking off this error message it is tiny. I am using CS6 and have been for about a year and this has just started happening.
View 6 Replies
View Related
Jan 17, 2014
[URL] This image is directly from a customer’s email. An Illustrator template for custom candy bags is sent to the customer and has about 10 layers on it. Somehow they always come back as Layer 1, flattened. I am opening them up in CS5.why a multi layered file constantly comes back from our customers as a single layer? Having all layers is very important for these bags to print properly.
View 2 Replies
View Related
