I have started receiving the following error:
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
Map3D 2012
Intel Core2 Duo
2.66ghz
3gb ram
I am getting a error when I open a specific drawing
FATAL ERROR: unhandled e06d7363h Exception at fel14940.
I have tried to recover the drawing (message says error were found and then I get the same error)
tried the back up file ...no go
tried a back up file from 2 weeks prior, same result.
Have tried inserting as a block to a new drawing... same error.
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedI just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies View RelatedI've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
using autoCAD 2009 everytime I open up the Layer Properties Manager, it causes a Fatal Error and autoCAD to shut down, this is a first and need need to know how to solve this problem or at least a diagnose.
View 1 Replies View RelatedEven though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedEnvironment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
Everytime I try to place a #8 machine screw type II screw from the content center I get a Design Accelerator Doctor error saying: "Modeling: Failed to insert a part into assembly!".
But if I place a Type I machine screw it works fine. Also if I replace the Type I screw with the Type II (the one I have a problem with) it replaces it no problem. So basically if I want to place a #8 Type II screw I have to place a Type I and then replace it with the Type II..
I am creating a couple of spur gears using the "Center Distance" design guide. I have fixed each gear to a cylindrical face, but when I click on the "Calculate" button, there is an error saying that the center distance is incorrect.
I went back and edited my sketches so the center distance matched the one displayed in the design accelerator and attempted to calculate again, but the error persists. What am I not getting here?
I keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
I have never written a script but I figure this task is a good place to start. We currently have almost 8,000 files that all use different dimension styles, leader styles, layers and layouts. (All before I got here) I have successfully used the design center to where we can open an old drawing then go through and add all of the new 'standard styles, layouts, and layers'
can I write a script that will add all of these at once. It is not that it is that terrible of a job to do, but like I said my thought is it will be a good way to learn more about scripts, and we have a lot of drawings this needs to happen with.
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedInserting blocks from design center coming in bigger scale...what should I do to control the scale factor?
I have being dealing with INSUNITS factor without success...
when i pick design center from the ribbon nothing happens. Even if i type in adcenter nothing happens.
View 2 Replies View RelatedHow do I open the Design Centre and see "blocks" that are bound xref with $0$ in the name, unless the bindtype is set to insert.
I'm not a monster, I just look like one.
how to convert the block to 3d (like bed) from design center?
View 1 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies View RelatedCan you open two dwgs and copy blocks from one design center to the other?
View 3 Replies View RelatedI am wondering if there is a way for the images of blocks in the Design Center viewing window to be bigger. Its hard to see what all is in the block.
View 2 Replies View RelatedACA2014. Need instructions on how to import a file into the Design Center.
View 3 Replies View RelatedI cannot get the DC Online tab to show on the Design Center. I have enabled it through the CAD manager Control Utility. I have shut down CAD and restarted it and still no tab.
View 3 Replies View RelatedIn older versions of AutoCAD they had sample drawings in Design Center with blocks that were useful. They included a drawing for Home Space PLanning, Landscaping, etc. where these files or blocks are found in 2013? I want to use some of the sample blocks that I had access to in older versions of AutoCAD.
View 2 Replies View RelatedWe have both 2012 and 2013 AutoCAD at work, and both versions are having the same problem. When adding favorites in Design Center, it does not show up. The shortcut is actually there if I browse using Windows Explorer, but it does not show up in Design Center. I guess this is some issue where shortcuts do not show up, which is beyond me because that is how the Favorites system is supposed to work.
I should add, this is not an issue on some of our older machines running AutoCAD 2009.
how do i import from the design center into my project
View 1 Replies View RelatedI am trying to bring in a block from the design center and some of the parts that were created as the block are not showing up. If there is a layer setting or another setting in the drawing that I am missing?
View 3 Replies View RelatedCan I take a block that is currently in my drawing and put it into a tool palette? I know how to move blocks from the Design Center to a Tool Palette but I don't know how to get my blocks into the Design Center.
Scenario: We use a number of different fasteners in our drawings but they aren't the fasteners that are currently in the Design Center under "fasteners". I am manually redrawing the same fasteners each time I start a new drawing.
Why is the design center not coming on screen. When I press the button, the command says adccclose
View 3 Replies View Relatedi lost the location of my 3d template in DC., i cant put furniture on my plan
View 1 Replies View Relatedi coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.