AutoCAD Inventor :: Content Center / Design Accelerator Doctor - ERROR
Sep 28, 2006
Everytime I try to place a #8 machine screw type II screw from the content center I get a Design Accelerator Doctor error saying: "Modeling: Failed to insert a part into assembly!".
But if I place a Type I machine screw it works fine. Also if I replace the Type I screw with the Type II (the one I have a problem with) it replaces it no problem. So basically if I want to place a #8 Type II screw I have to place a Type I and then replace it with the Type II..
View 8 Replies
ADVERTISEMENT
Nov 13, 2011
I am creating a couple of spur gears using the "Center Distance" design guide. I have fixed each gear to a cylindrical face, but when I click on the "Calculate" button, there is an error saying that the center distance is incorrect.
I went back and edited my sketches so the center distance matched the one displayed in the design accelerator and attempted to calculate again, but the error persists. What am I not getting here?
View 9 Replies
View Related
Mar 20, 2013
Is there a way to check in VBA if the design doctor has found errors in a drawing? I have a mass print script and it'd be handy to be able to skip printing any drawings that have errors like unatached dimensions and such.
View 2 Replies
View Related
Mar 16, 2012
I have authored a meter as an iPart before placing into Content Centre - it will be authored to be used in tube and pipe.
Some variants have Rc (ISO Taper Threads) ranging from ¼-2", and some have G (ISO Pipe Threads). The only way I could get it to change between the different thread types was to model threaded hole features, and change the thread spec in the iPart table. {I have included the part so you can see what I've done}
It works fine as an iPart, but after having placed it into content centre the following errors occur with the generated Parts: the threads fail, the holes do not compute (resulting in the failure of the authored Tube and Pipe work points and axes), also the bmp decal doesn't rotate properly.
View 2 Replies
View Related
Nov 23, 2010
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
View 2 Replies
View Related
Nov 6, 2011
I had Autodesk Inventor 2011 installed for a while, and then installed some other programs (3DS, Maya and Showcase). This caused all of my add-ins to disappear from Inventor. I managed to get them back, but now when I click the 'Insert Frame' button, I get the followin gerror: [WARNING] Problems encountered while executing frame insert command. [ERROR] Failed to read data from Content Center. [ERROR] Content Center server query failed. check your Content Center configuration to make sure all required libraries are present or check Content Center connectivity to server. I've reinstalled Inventor and reinstalled the content center libraries and the error message is still there. The content center configuration in Application Options seems fine.
View 8 Replies
View Related
Oct 21, 2013
I am trying to share an assembly with some design accelerators and content center files and it seems to be not possible. I changed the directory of the application>file>content center to the same location on both PC but it is still not working.
View 2 Replies
View Related
Sep 28, 2013
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
View 1 Replies
View Related
Mar 28, 2013
I am trying to replace an unresolved standard part with a component from a custom content center in a stand-alone installation. I get this error message:
"There was a problem encountered while communicating with the server. Please check the network connection and server status."
I can place the same component from the content center. The content center component family was created as "save to" from an ANSI standard.
View 1 Replies
View Related
Aug 15, 2012
When opening one custom Content Center iPart from Inventor I get an Styles Conflict error for some Lights, Materials and Sheet Metal rules.
The Library is created in Inventor 2010 and migrated to 2012. All templates an Design Data are migrated as well. How are these styles are updated in a certain Part?
See the image
View 1 Replies
View Related
Sep 25, 2013
I recently did a pack and go on a top level assembly. Kept folder hierarchy. Included linked files. Included referenced files. All OK so far.
Then opened the assembly in the “Pack and go” folder I created to put it, and it cannot find all the content center parts, such as the ASME eccentric reducer and M24 bolt – see attached i.e. I had to resolve the links. I know they came over with the pack and go as they are in the “Libraries” folder.
Inventor Professional 2014.
Windows 7 64 bit.
View 1 Replies
View Related
Nov 3, 2011
I have created custom pipe fitting categories in my server based content center. I copied the standard familes over to a custom library and modified them. After updating the family tables, and hitting refresh in an assembly, the updates fail.
This is the error I get:
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.
These parts were placed via "Place from content center" as I do not have the tube & pipe addin (2011 suite, not pro)
How do I get these compnonents to update / refresh??
View 4 Replies
View Related
Jul 5, 2012
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
View 2 Replies
View Related
Oct 23, 2013
I am using version 2014 and all the tabs under "Design" are greyed out. I am trying to use the "Insert Frame" function.
Note: Windows 64bit. Recently upgrade from 2013.
Similar problem Here: [URL]....
View 7 Replies
View Related
Aug 19, 2013
I am having a problem with the design accelerator in 2014. The tab is there, but I cannot click any of the buttons to actually insert a frame or design some gears. They are all grayed out. The design Accelerator appears to be loaded in the add-ins screen. I am running Win 7 64 bit.
View 4 Replies
View Related
Sep 14, 2013
Design accelerator does not generate sprockets for chain? I would like to know why.
View 7 Replies
View Related
Jan 17, 2013
Roller Chain accelerator give fault value? For example, I have a basic chain setup with 180SP40 and 180SP15 (both are existing sprockets). After choosing the correct chain style from the table and start choosing the existing sprockets (OD of the tooth), tt gave me a fault output and recognize the 180SP40 as a 42 tooth sprocket and 180SP15 as a 17 tooth sprocket
View 1 Replies
View Related
Jul 4, 2013
I'm customizing templates inventor.I need to know how to customize the template using DA for the design of the shafts.
View 1 Replies
View Related
Jun 7, 2013
Is there a way I can add hpt belts to the design accelerator? I'm using inventor 2013 and I want to use 8m belts without having to find the models of each pulley and individually add them.
View 1 Replies
View Related
Nov 15, 2012
I am working on a gearbox design that requires multiple iterations on the shaft dimensins and other parts, so linking the dimiensinos to a spreadsheet would make this easier. However, I'm using the design accelerator for the shaft and other components and I cannot find any information on how to connect the dimensions I enter in that design accelerator to a speadsheet.
I know how to link to a spreadsheet for a regular component, but haven't used that much.
View 3 Replies
View Related
Nov 8, 2013
I am having a problem while making 2 straight spur gears. The purpose is to connect the crankshaft with the camshaft. Center distance is fixed: 85,5mm. I would like a ratio of 0,5 with 22 and 44 teeth. My gears seem to hit each other. Please find the attached pictures below for a detail and my inputs.
View 3 Replies
View Related
Feb 3, 2013
When I import an Inventor model to Showcase, bolted connections are missing the bolt. I get the washers and nuts but the bolt is gone. I can overcome this by saving the bolt part in a project folder but this is time consuming.
Are there some settings I am missing or is it just another item to add to the fixit list?
View 1 Replies
View Related
Nov 29, 2011
If there is a way to create multiple instances of bolted connections using design accelerator instead of having to add one by one which takes forever ? All the bolted connections are of the same specification.
View 2 Replies
View Related
Apr 17, 2012
My design center has the content of my entire computer on it. How do I adjust it so that only the general blocks are present on there, such as doors, plants, etc.?
View 2 Replies
View Related
Apr 28, 2013
I've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counterbore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
I went in to these two XML files and edited them (and kept backups): Ansi Metric M Profile.xml Ansi Unified Screw Threads.xml
Everything seems to be cool, except for one scenario. When I create a counterbored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 4 Replies
View Related
Aug 22, 2013
I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
View 3 Replies
View Related
Sep 17, 2013
is it possible to produce something like in the attached image using the design accelerator? Instead of making a cylinder and sketching the spline patterns and extruding? To me there must be a way besides sketching and use the library's of standard splines patterns and sizes.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Jun 7, 2012
Is there a way of using design accelerator to rivet fix as you would with bolted connection ? I know that by initiating the bolted connection command there is no option to use rivet to complete the connection as is done with bolts. It would be great if rivets from the content centre could be somehow imported into the bolted connection component generator (or readily available) to add like bolted connection or if there are any 'workaround's' to produced similar results ?
View 1 Replies
View Related
May 14, 2013
I've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]......
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counter bore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
No big deal, right? I went in to these two XML files and edited them (and kept backups):
Ansi Metric M Profile.xml
Ansi Unified Screw Threads.xml
The problem ==========>
Everything seems to be cool, except for one scenario. When I create a counter bored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
View 9 Replies
View Related
Nov 20, 2011
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
View 4 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
