AutoCAD Inventor :: Server Communication Error / Custom Content Center
Mar 28, 2013
I am trying to replace an unresolved standard part with a component from a custom content center in a stand-alone installation. I get this error message:
"There was a problem encountered while communicating with the server. Please check the network connection and server status."
I can place the same component from the content center. The content center component family was created as "save to" from an ANSI standard.
View 1 Replies
ADVERTISEMENT
Nov 23, 2010
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
View 2 Replies
View Related
Sep 28, 2013
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
View 1 Replies
View Related
May 14, 2012
I am working on customizing our content center, or at least learning about how to do it and am getting completley lost. Maybe it is just the termonology. In the Wiki help instructions I am instructed to open the "data management server console" and a path is given in the last line.
When I follow this path the only options I find under Autodesk data management are: links to open the vault or to open the auto loader.Am I missing something, or is the main opening screen to the vault what is considered the server console? I am also looking for where to open the "Content Center Editor"
Since the content center parts are EXCELL baised I should be able to do most of the editing once I figure out how to get into them but I am having a hard time getting there. The one thing I am not sure I am going to be able to figure out is that I like to place a work datum midway between the start and end datums. It is an easy job to place an offset datum from the start datum and then go into the propertys and set the offset + B_L/2. However I am not sure how to create this datum in the family prior to creating the instance.
View 3 Replies
View Related
Aug 1, 2013
I have recently set up a new PC with pretty high end specs and have noticed Inventor still doesnt perform as expected, i am using maybe 5% of my 64gb ram and 10-20% of my i7 4ghz CPU.
We are using a network vault and the content center is stored on the vault, using frame generator i have noticed significant performance problems (considering these specs)
Could it be a bottle neck in the Server?
(latest service pack for Inventor 2013 installed) 64 bit machine.
Quodro k200d GPU
View 1 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
View Related
Feb 2, 2012
I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
View 5 Replies
View Related
Nov 25, 2013
The time has finally arrived; the current content center profiles no longer suit my needs (for this specific project) and I now must create an extrusion that consists of holes. This profile is to be used in the Frame Generator and Frame analysis so it is imperative that I get the holes into the custom extrusion (see attached picture for the extrusion I require - it is a column extrusion for Pallet Racks. I have never entered the realm of custom content center extrusions. I need to do as far as what values I will require for the Analysis part (Inertias, Areas, etc...) and what proces I will take in order to first set up my extrusion to use? As mentioned, the holes in the extrusion are vital as they occue frequently (every 3 inches) and will affect the results in my analysis. I am currently in the process of reading up on Custom Content Center Publishing. Using Inventor 2014 Professional.
View 9 Replies
View Related
Oct 26, 2011
We use different types of Stainless Steel fasteners. For example 18-8, 304, 316, etc. When I use the "Material Guide" in the Content Center Editor it only has the Autodesk default materials listed. How do I add CUSTOM materials to this list to create new families with my custom materials?
View 1 Replies
View Related
May 1, 2012
I am using a student version of Inventor 2012 to design the FSAE Chassis for our University team this year. I was not able to find suitable geometry for the required tubing to make the chassis. So I found a guide on setting up a Custom Content Center and publishing parts. I have followed that. The Chassis has turned out great but now I am trying to draw it up and the BOM is not populating as desired.
A Summary:
-Custom Project file with Read / Write Library added.
-Custom tubing geometry created and published to the Library.
-Chassis constructed using standard Frame Generator techniques.
Previously I had the chassis modelled using standard Content Center parts and the BOM would populate with the individual tubes in the drawing environment. Now with the custom tubes the BOM calls up each of the individual tubing sizes, ONCE only and has large quantities. The automatic "Measure" Column is also populated with "*Varies*".
In the Frame Generator wizard each tubing size has come up as it's own "Family".I believe this is because I have published the different part sizes individually. I am guessing I should have published only the one active part but with variable geometry selectable in the "Size" drop down?
I have tried forcing the assembly into the "All Levels" view with the Bill of Materials pop-up in the Assembly environment, but even this is not populating correctly.Something else I have noticed is the individual tubes are using a different naming convention in the model tree.
View 6 Replies
View Related
Dec 4, 2013
A coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies
View Related
May 25, 2011
We have invested much time in creating custom content center family tables based on exisiting ANSI tables, etc. so that we can suppress sizes and shapes we do not use and have the descriptions and stock numbers show up both so BOM and parts lists will roll up identical parts and as our purchasing department requires.
We have just discovered, however belatedly, that while these custom tables function just fine when placing an individual part, frame generator apparently does not see these and gets it's info from somewhere else. I have seen a similar post which references an McadForums post, but the link provided is dead.
[URL]....
How to point frame generator to customized CC familes?
View 9 Replies
View Related
Dec 11, 2013
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies
View Related
May 2, 2013
I am looking for a way to recognize a custom content Center part inside Inventor. The way I see it, I would like to fill a custom property with a value so I can set a seperate category inside Vault Pro for a custom Content Center part.
What I found is the following:
CustomContentCenter variabele: ContentCenter{844FDDD7-2E90-4E4C-8868-134CEAEDC078}
IsCustomPart 1
Is there any way that I can get this information inside an Custom Property?
View 1 Replies
View Related
Jul 19, 2012
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
View 1 Replies
View Related
Sep 12, 2013
I'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.
The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."
I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.
View 7 Replies
View Related
Jun 28, 2012
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
View 3 Replies
View Related
Mar 13, 2013
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
View 8 Replies
View Related
May 10, 2013
I'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies
View Related
Mar 16, 2012
I have authored a meter as an iPart before placing into Content Centre - it will be authored to be used in tube and pipe.
Some variants have Rc (ISO Taper Threads) ranging from ¼-2", and some have G (ISO Pipe Threads). The only way I could get it to change between the different thread types was to model threaded hole features, and change the thread spec in the iPart table. {I have included the part so you can see what I've done}
It works fine as an iPart, but after having placed it into content centre the following errors occur with the generated Parts: the threads fail, the holes do not compute (resulting in the failure of the authored Tube and Pipe work points and axes), also the bmp decal doesn't rotate properly.
View 2 Replies
View Related
May 9, 2013
I would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies
View Related
Nov 6, 2011
I had Autodesk Inventor 2011 installed for a while, and then installed some other programs (3DS, Maya and Showcase). This caused all of my add-ins to disappear from Inventor. I managed to get them back, but now when I click the 'Insert Frame' button, I get the followin gerror: [WARNING] Problems encountered while executing frame insert command. [ERROR] Failed to read data from Content Center. [ERROR] Content Center server query failed. check your Content Center configuration to make sure all required libraries are present or check Content Center connectivity to server. I've reinstalled Inventor and reinstalled the content center libraries and the error message is still there. The content center configuration in Application Options seems fine.
View 8 Replies
View Related
Oct 21, 2013
I am trying to share an assembly with some design accelerators and content center files and it seems to be not possible. I changed the directory of the application>file>content center to the same location on both PC but it is still not working.
View 2 Replies
View Related
Sep 28, 2006
Everytime I try to place a #8 machine screw type II screw from the content center I get a Design Accelerator Doctor error saying: "Modeling: Failed to insert a part into assembly!".
But if I place a Type I machine screw it works fine. Also if I replace the Type I screw with the Type II (the one I have a problem with) it replaces it no problem. So basically if I want to place a #8 Type II screw I have to place a Type I and then replace it with the Type II..
View 8 Replies
View Related
Aug 15, 2012
When opening one custom Content Center iPart from Inventor I get an Styles Conflict error for some Lights, Materials and Sheet Metal rules.
The Library is created in Inventor 2010 and migrated to 2012. All templates an Design Data are migrated as well. How are these styles are updated in a certain Part?
See the image
View 1 Replies
View Related
Sep 25, 2013
I recently did a pack and go on a top level assembly. Kept folder hierarchy. Included linked files. Included referenced files. All OK so far.
Then opened the assembly in the “Pack and go” folder I created to put it, and it cannot find all the content center parts, such as the ASME eccentric reducer and M24 bolt – see attached i.e. I had to resolve the links. I know they came over with the pack and go as they are in the “Libraries” folder.
Inventor Professional 2014.
Windows 7 64 bit.
View 1 Replies
View Related
Nov 3, 2011
I have created custom pipe fitting categories in my server based content center. I copied the standard familes over to a custom library and modified them. After updating the family tables, and hitting refresh in an assembly, the updates fail.
This is the error I get:
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.
These parts were placed via "Place from content center" as I do not have the tube & pipe addin (2011 suite, not pro)
How do I get these compnonents to update / refresh??
View 4 Replies
View Related
Sep 21, 2013
I am having trouble installing Inventor 2014 on my windows 8 laptop, I keep getting a window with "Communication Error"
View 3 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Sep 9, 2013
Using Inventor 2014 and Vault Basic 2014. It was working this morning but now when Invnetor is opened it automatically logs into Vault and says it is successful but the open from vault icon is greyed out. Similarly when opening a drawing from the vault it used to automatically run and open inventor but now seems to lack the connection. Even when manually opening a drawing that is in the vault by downloading it from the browser and then opening in inventor there is no Vault tab on the browser and all Vault commands except "log out" are greyed out. I think it has something to do with the add-in as well as the Vault group.
View 2 Replies
View Related
