AutoCAD Inventor :: ILogic - Set Custom Property In Custom Content Center Part
May 16, 2013
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
View 1 Replies
ADVERTISEMENT
May 10, 2013
I'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies
View Related
Oct 31, 2013
I have a part number that i want to defined in custom properties.
Then would it be possible to call it out in Ilogic? that way in any drawing doesn't matter where the part number will always be the same for that part when i balloon and the same in the BOM.
View 4 Replies
View Related
Dec 4, 2013
A coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies
View Related
May 2, 2013
I am looking for a way to recognize a custom content Center part inside Inventor. The way I see it, I would like to fill a custom property with a value so I can set a seperate category inside Vault Pro for a custom Content Center part.
What I found is the following:
CustomContentCenter variabele: ContentCenter{844FDDD7-2E90-4E4C-8868-134CEAEDC078}
IsCustomPart 1
Is there any way that I can get this information inside an Custom Property?
View 1 Replies
View Related
Jul 19, 2012
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
View 1 Replies
View Related
May 9, 2013
I would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Sep 21, 2011
I would like to set the custom property format for all user paramters from an iLogic code. This is what I've come up with. It runs, but it does not seem to alter the custom property format. What am I doing wrong here?
DimoPartDocAsPartDocument
oPartDoc=ThisApplication.ActiveDocument
DimoParameterAsParameter
ForEachoParameterInoPartDoc.ComponentDefinition.Parameters
oParameter.ExposedAsProperty=True
ShowUnitString=True
ShowLeadingZeros=True
ShowTrailingZeros=False
Precision=kTwoDecimalPlacesPrecision
NextoParameter
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 9 Replies
View Related
Feb 2, 2012
I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
View 5 Replies
View Related
Nov 25, 2013
The time has finally arrived; the current content center profiles no longer suit my needs (for this specific project) and I now must create an extrusion that consists of holes. This profile is to be used in the Frame Generator and Frame analysis so it is imperative that I get the holes into the custom extrusion (see attached picture for the extrusion I require - it is a column extrusion for Pallet Racks. I have never entered the realm of custom content center extrusions. I need to do as far as what values I will require for the Analysis part (Inertias, Areas, etc...) and what proces I will take in order to first set up my extrusion to use? As mentioned, the holes in the extrusion are vital as they occue frequently (every 3 inches) and will affect the results in my analysis. I am currently in the process of reading up on Custom Content Center Publishing. Using Inventor 2014 Professional.
View 9 Replies
View Related
Jul 14, 2012
I'm trying to see if I can write a rule that will link a custom property at the part level in a template and have it update when I copy the part and drawing to a new design. Below is the formula I'm using and it works in the original files but when I use Design Assistant to create a copy for a new design, this formula will not update.
iProperties.Value("Custom", "Title")=Parameter("Bearing_#01.ipt.Build_Title")
View 5 Replies
View Related
Oct 26, 2011
We use different types of Stainless Steel fasteners. For example 18-8, 304, 316, etc. When I use the "Material Guide" in the Content Center Editor it only has the Autodesk default materials listed. How do I add CUSTOM materials to this list to create new families with my custom materials?
View 1 Replies
View Related
May 1, 2012
I am using a student version of Inventor 2012 to design the FSAE Chassis for our University team this year. I was not able to find suitable geometry for the required tubing to make the chassis. So I found a guide on setting up a Custom Content Center and publishing parts. I have followed that. The Chassis has turned out great but now I am trying to draw it up and the BOM is not populating as desired.
A Summary:
-Custom Project file with Read / Write Library added.
-Custom tubing geometry created and published to the Library.
-Chassis constructed using standard Frame Generator techniques.
Previously I had the chassis modelled using standard Content Center parts and the BOM would populate with the individual tubes in the drawing environment. Now with the custom tubes the BOM calls up each of the individual tubing sizes, ONCE only and has large quantities. The automatic "Measure" Column is also populated with "*Varies*".
In the Frame Generator wizard each tubing size has come up as it's own "Family".I believe this is because I have published the different part sizes individually. I am guessing I should have published only the one active part but with variable geometry selectable in the "Size" drop down?
I have tried forcing the assembly into the "All Levels" view with the Bill of Materials pop-up in the Assembly environment, but even this is not populating correctly.Something else I have noticed is the individual tubes are using a different naming convention in the model tree.
View 6 Replies
View Related
Nov 23, 2010
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
View 2 Replies
View Related
May 25, 2011
We have invested much time in creating custom content center family tables based on exisiting ANSI tables, etc. so that we can suppress sizes and shapes we do not use and have the descriptions and stock numbers show up both so BOM and parts lists will roll up identical parts and as our purchasing department requires.
We have just discovered, however belatedly, that while these custom tables function just fine when placing an individual part, frame generator apparently does not see these and gets it's info from somewhere else. I have seen a similar post which references an McadForums post, but the link provided is dead.
[URL]....
How to point frame generator to customized CC familes?
View 9 Replies
View Related
Dec 11, 2013
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies
View Related
Sep 28, 2013
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
View 1 Replies
View Related
Mar 28, 2013
I am trying to replace an unresolved standard part with a component from a custom content center in a stand-alone installation. I get this error message:
"There was a problem encountered while communicating with the server. Please check the network connection and server status."
I can place the same component from the content center. The content center component family was created as "save to" from an ANSI standard.
View 1 Replies
View Related
Sep 12, 2013
I'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.
The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."
I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.
View 7 Replies
View Related
Jun 28, 2012
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
View 3 Replies
View Related
Mar 13, 2013
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
View 8 Replies
View Related
Sep 15, 2011
I have been trying to find a method to extract custom properties from the custom property bag.
I have been able to extract the property value, using the "GetProperty" and the associated "GetValue" method, this method works when I know exactly what property name I am looking for. What do you do when you don't know the property name?
here is my code snippet..
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myProp as iacsmcustompropertyvalue = myprops.getproperty("SOMENAME")
dim myPV as string = myProp.GetValue
what I want to do is:
dim myProps as acsmcustompropertybag = mysheet.getcustompropertybag
dim myPN as string = ??????????.tostring
dim myProp as iacsmcustompropertyvalue = myprops.getproperty(myPN)
dim myPV as string = myProp.GetValue
View 6 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Sep 19, 2013
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
View 6 Replies
View Related
Nov 30, 2011
I am trying to create a sketched symbol on the fly that has custom properties in it. I am also creating the custom properties on the fly. I need to get the actual expression for the property into the sketched symbol not just a value. I need this so that I can export the drawing as an autocad .dwg that has attributes in it.
View 3 Replies
View Related
Oct 25, 2013
In the parameters window you can right click a value and choose a custom property format.
We always change everything to fraactional instead of decimal.
Is there a way to set this as default?
View 6 Replies
View Related
Feb 20, 2012
The company I work for produce drawings for various types of fabrication.
Using Inventor I have a drawing border in which tolerance values change depending on the type of fabrication to be produced. The type of fabrication (0,1,2,or 3) is designated by a custom property entered during part/fab model creation.
This property may change depending on various production factors. The issue I have is how do I get the border to recognize this potential change in fab type and populate the tolerance fields with the necessary information?
View 3 Replies
View Related
Mar 22, 2013
My company has a custom property named 'Released date, Type Date.
This date is still empty
I am working on a rule that adds all the custom properties required for the company title block.
This rule can be useful whenever you get a model from a supplier.
I can add a custom property date using the following
Dim oDoc As Document = ThisApplication.ActiveDocument
Dim customPropertySet As PropertySet = oDoc.PropertySets.Item("Inventor User Defined Properties")
Try
iProperties.Value("Custom", "Released Date") = iProperties.Value("Custom", "Released Date")
Catch
[Code]...
This code works but sets the released date to Now.
But the release date needs to remain blank when adding.
I tried to make the value Null but I get the error:
"Value of type 'System.DBNull' cannot be converted to 'Date'."
Is there a way to keep a custom property date blank?
View 2 Replies
View Related
Apr 8, 2013
I have a frame fabrication / assembly with a Custom iProperty called "FINISHED MATERIAL SIZE". I have set the following parameter for this property:
FINISHED MATERIAL SIZE = <Stock Number> x <G_L>mm
This returns the stock size and length to my drawing cutlist. The problem is that the <G_L> Parameter returns the trailing zeros and unit string.
I would like to set all the frame members in the assembly such that the G_L parameter returns a value rounded off to 0 decimal places with no trailing zeros and removes the unit string as well.
Is there a way I can achieve this from the assembly so I don't have to manually open each frame member and make the changes in the fx parameters dialog one at a time?
View 3 Replies
View Related
Sep 29, 2011
How would i insert the "variable name" of a custom iProp to a sketched symbol definition (in an idw)?
I can plonk the value of the iProp in no worries, but to make it "live" is a bit beyond me...
Sub WeldNote()On Error Resume NextDim oDoc As DrawingDocumentDim SketchedSym As SketchedSymbolDefinitionDim oNoteDef As SketchedSymbolDefinitionDim oDefSketch As SketchDim oTextbox As TextBoxDim SNewText As StringDim sNoteText As StringDim oReffedDoc As DocumentDim lReffedWeldType As Long'Err.ClearIf
[Code].....
View 9 Replies
View Related
