I would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
I'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies View RelatedI'm also trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form.
View 4 Replies View RelatedI'm trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form. If you know a way to program how to close a form through iLogic, or find a way to see if it's still open
I'm not sure that I actually want to access the button per say, but instead launch the dialog box. I'm not sure if this differs your answer in any way, but I searched the customization forum and found little information.
Using Ilogic 2010 I wish to trigger my rule on sheet change. Is this something that can be done? I am using it to zoom the drawing on sheet change.
View 1 Replies View RelatedWhen inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
I have authored a part to the Content Center, but the part is inserted at a standardized length. How do I author the part so that the length can be specified whem inserted, like the structural steel shapes?
View 3 Replies View RelatedJust as it sounds, my client wants to be able to set the layers up in a drawing file so that all CC parts come in on a specific layer on the drawing.
I'm looking at the layers and the Object Defaults menus in Style Editor but not finding a way to accomplish this.
I can't seem to find studs in the Content Center to drop into my assembly. Are they not included?
I'm running Inventor Professional 2014.
The time has finally arrived; the current content center profiles no longer suit my needs (for this specific project) and I now must create an extrusion that consists of holes. This profile is to be used in the Frame Generator and Frame analysis so it is imperative that I get the holes into the custom extrusion (see attached picture for the extrusion I require - it is a column extrusion for Pallet Racks. I have never entered the realm of custom content center extrusions. I need to do as far as what values I will require for the Analysis part (Inertias, Areas, etc...) and what proces I will take in order to first set up my extrusion to use? As mentioned, the holes in the extrusion are vital as they occue frequently (every 3 inches) and will affect the results in my analysis. I am currently in the process of reading up on Custom Content Center Publishing. Using Inventor 2014 Professional.
View 9 Replies View RelatedWhy is access to the Content Center only available in the Assembly Environment?
Surely I can't be the only one that could benefit from access to the library when creating a single tube or beam or angle bracket etc..in the part environment.
When my colleague opens one of my assembly's which has content center items in it his inventor cannot find them and vice versa. I am assuming my content center items are coming from my hard drive and not a server from the same place as him. How do you set it up so both our computers take content items from the same location?
View 2 Replies View RelatedWe use different types of Stainless Steel fasteners. For example 18-8, 304, 316, etc. When I use the "Material Guide" in the Content Center Editor it only has the Autodesk default materials listed. How do I add CUSTOM materials to this list to create new families with my custom materials?
View 1 Replies View RelatedI am using a student version of Inventor 2012 to design the FSAE Chassis for our University team this year. I was not able to find suitable geometry for the required tubing to make the chassis. So I found a guide on setting up a Custom Content Center and publishing parts. I have followed that. The Chassis has turned out great but now I am trying to draw it up and the BOM is not populating as desired.
A Summary:
-Custom Project file with Read / Write Library added.
-Custom tubing geometry created and published to the Library.
-Chassis constructed using standard Frame Generator techniques.
Previously I had the chassis modelled using standard Content Center parts and the BOM would populate with the individual tubes in the drawing environment. Now with the custom tubes the BOM calls up each of the individual tubing sizes, ONCE only and has large quantities. The automatic "Measure" Column is also populated with "*Varies*".
In the Frame Generator wizard each tubing size has come up as it's own "Family".I believe this is because I have published the different part sizes individually. I am guessing I should have published only the one active part but with variable geometry selectable in the "Size" drop down?
I have tried forcing the assembly into the "All Levels" view with the Bill of Materials pop-up in the Assembly environment, but even this is not populating correctly.Something else I have noticed is the individual tubes are using a different naming convention in the model tree.
A coworker of mine has made a bunch of custom extrusions, turned them into iParts, and published them to the Content Center. The parts are driven in length by the key parameter "Length". Unfortunately, he forgot to mark that "Length" parameter as export in the parameter dialogue before publishing. Is there ANY way to get that "Length" parameter to be exported so the Parts List can pull the cut length?
View 2 Replies View RelatedI copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
We have invested much time in creating custom content center family tables based on exisiting ANSI tables, etc. so that we can suppress sizes and shapes we do not use and have the descriptions and stock numbers show up both so BOM and parts lists will roll up identical parts and as our purchasing department requires.
We have just discovered, however belatedly, that while these custom tables function just fine when placing an individual part, frame generator apparently does not see these and gets it's info from somewhere else. I have seen a similar post which references an McadForums post, but the link provided is dead.
[URL]....
How to point frame generator to customized CC familes?
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies View RelatedI am looking for a way to recognize a custom content Center part inside Inventor. The way I see it, I would like to fill a custom property with a value so I can set a seperate category inside Vault Pro for a custom Content Center part.
What I found is the following:
CustomContentCenter variabele: ContentCenter{844FDDD7-2E90-4E4C-8868-134CEAEDC078}
IsCustomPart 1
Is there any way that I can get this information inside an Custom Property?
I've run into an issue with the Content Center customization. I easily understand how to manipulate the table to create parts with our part numbers, different material spec, & other predetermined aspects of the included templates that were included with the Inventor 2012 update. The issue I'm running into is that we would like to add or modify the original part the table is referring to.
In my example pics there is a bushing that I would like to control the hex nut size on. In the model it was created with a tangent constraint within the sketch instead of a linear dimension from the two flat surfaces. I would like to change that, but keep getting error messages stating:
A thing I bump in to everytime is that Content Center parts do not standard section in Assemblies and Drawings.
In the Drawings I can menage this by selecting the parts in browser or drawing views and get them sectioned or not.
In Assemblies there is the option to select "Participate in Assembly and Drawing sections" in the Document Settings.
Unfortunately this doesn't work on Content Center parts. Why not?
After searching the site, I noticed the "solution" to check the "Section All Parts" option in the Application options.
This solution is a work around. It only solves the issue when you want to section all parts.
But what if I want to section a few parts and not all?
For example, I do want to section my beams, pipes, tubes etc., but do not want to section my bolts, nuts, washers etc.
I thought that was wat the "Participate in Assembly and Drawing sections" option was for.
Currently working with Inventor 2012
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
I am trying to replace an unresolved standard part with a component from a custom content center in a stand-alone installation. I get this error message:
"There was a problem encountered while communicating with the server. Please check the network connection and server status."
I can place the same component from the content center. The content center component family was created as "save to" from an ANSI standard.
I'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.
The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."
I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.
I have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
Why can't Autodesk be more consistent? I'm trying to use Part Number in my Description Field in Family Table.
I.e.. Hex head bolt : DIN 931-1 - M6 x 60
Countersunk bolt : M4 x 20 DIN 7991
Why the switch???
