I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
View 3 Repliesis it possible to produce something like in the attached image using the design accelerator? Instead of making a cylinder and sketching the spline patterns and extruding? To me there must be a way besides sketching and use the library's of standard splines patterns and sizes.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I am using version 2014 and all the tabs under "Design" are greyed out. I am trying to use the "Insert Frame" function.
Note: Windows 64bit. Recently upgrade from 2013.
Similar problem Here: [URL]....
I am having a problem with the design accelerator in 2014. The tab is there, but I cannot click any of the buttons to actually insert a frame or design some gears. They are all grayed out. The design Accelerator appears to be loaded in the add-ins screen. I am running Win 7 64 bit.
View 4 Replies View RelatedDesign accelerator does not generate sprockets for chain? I would like to know why.
View 7 Replies View RelatedRoller Chain accelerator give fault value? For example, I have a basic chain setup with 180SP40 and 180SP15 (both are existing sprockets). After choosing the correct chain style from the table and start choosing the existing sprockets (OD of the tooth), tt gave me a fault output and recognize the 180SP40 as a 42 tooth sprocket and 180SP15 as a 17 tooth sprocket
View 1 Replies View RelatedI'm customizing templates inventor.I need to know how to customize the template using DA for the design of the shafts.
View 1 Replies View RelatedIs there a way I can add hpt belts to the design accelerator? I'm using inventor 2013 and I want to use 8m belts without having to find the models of each pulley and individually add them.
View 1 Replies View RelatedI am working on a gearbox design that requires multiple iterations on the shaft dimensins and other parts, so linking the dimiensinos to a spreadsheet would make this easier. However, I'm using the design accelerator for the shaft and other components and I cannot find any information on how to connect the dimensions I enter in that design accelerator to a speadsheet.
I know how to link to a spreadsheet for a regular component, but haven't used that much.
I am having a problem while making 2 straight spur gears. The purpose is to connect the crankshaft with the camshaft. Center distance is fixed: 85,5mm. I would like a ratio of 0,5 with 22 and 44 teeth. My gears seem to hit each other. Please find the attached pictures below for a detail and my inputs.
View 3 Replies View RelatedWhen I import an Inventor model to Showcase, bolted connections are missing the bolt. I get the washers and nuts but the bolt is gone. I can overcome this by saving the bolt part in a project folder but this is time consuming.
Are there some settings I am missing or is it just another item to add to the fixit list?
If there is a way to create multiple instances of bolted connections using design accelerator instead of having to add one by one which takes forever ? All the bolted connections are of the same specification.
View 2 Replies View RelatedEverytime I try to place a #8 machine screw type II screw from the content center I get a Design Accelerator Doctor error saying: "Modeling: Failed to insert a part into assembly!".
But if I place a Type I machine screw it works fine. Also if I replace the Type I screw with the Type II (the one I have a problem with) it replaces it no problem. So basically if I want to place a #8 Type II screw I have to place a Type I and then replace it with the Type II..
I've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counterbore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
I went in to these two XML files and edited them (and kept backups): Ansi Metric M Profile.xml Ansi Unified Screw Threads.xml
Everything seems to be cool, except for one scenario. When I create a counterbored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
Is there a way of using design accelerator to rivet fix as you would with bolted connection ? I know that by initiating the bolted connection command there is no option to use rivet to complete the connection as is done with bolts. It would be great if rivets from the content centre could be somehow imported into the bolted connection component generator (or readily available) to add like bolted connection or if there are any 'workaround's' to produced similar results ?
View 1 Replies View RelatedI've got a strange situation regarding the bolted connection generator. For some background, I made another post a while back about editing the hole sizes for Flat Head Cap Screws so that the heads were below flush. That thread is here:
[URL]......
Basically, I increased the countersink diameters Clearance.xls and then found that the Design Accelerator doesn't use that spreadsheet for its data source. More research led me to this file:
C:UsersPublicDocumentsAutodeskInventor 2013Design DataDesign AcceleratorTablesHolesAnsi Unified Screw Threads.xml
So I edited the diameters in this file and tested the design accelerator and everything was great. [I kept a backup of the original...]
Since then, another thing that has bothered me was counter bore numbers for socket head cap screws. The Cbore diameters don't match the tools that we have and the depths are always right on size. i.e. for a 1/4" SHCS, the bore is 7/16" diam x 0.250" deep. In reality our cbore tools are about 0.406 and we cut them about 0.265 deep to make sure the head is below flush.
No big deal, right? I went in to these two XML files and edited them (and kept backups):
Ansi Metric M Profile.xml
Ansi Unified Screw Threads.xml
The problem ==========>
Everything seems to be cool, except for one scenario. When I create a counter bored joint for a metric SHCS, the cbore diameter is always 16.00 mm diameter and too deep, regardless of its size. I searched the XML file and what it's doing *does not* match the data in the XML file. I monkeyed around a little more and could not get the counterbores to come out right.
So at that point, I renamed all the files to restore my original backups to the "factory" ones. I assumed that I screwed up the formatting or something in the data table and I'd just try it again. However, even after I restored my backups and removed my edited files, the metric counterbores are messed up.
What I don't understand is that changing the file "Ansi Unified Screw Threads.xml" *did* update the holes for English screw joints. But does the DA pull data for metric joints from somewhere OTHER than "Ansi Metric M Profile.xml"? And if it does use this XML file, why isn't it working? The original data has been restored, but the behavior is not behaving correctly.
I am creating a couple of spur gears using the "Center Distance" design guide. I have fixed each gear to a cylindrical face, but when I click on the "Calculate" button, there is an error saying that the center distance is incorrect.
I went back and edited my sketches so the center distance matched the one displayed in the design accelerator and attempted to calculate again, but the error persists. What am I not getting here?
In the drawing environment is there any way of defaulting hatch to be turned on when creating an ISO of a section?
View 1 Replies View Relatedis there a way to only show hidden lines on a shaft with a hole in it to only show quadrens instead of 30 lines around the arc.
View 9 Replies View RelatedI am completely new to ilogic but would like to make a rule in my idw file that change the hatch pattern in a section of a specific material.
Short Version:
I have an aluminum extrusion part. Material is set to Aluminum-6061. In any section view of this part I want the hatch to be ANSI 31 with a rotation of 45 degrees and a scale of .02 How do I do this?
inventor 2012. for instance for a aux. view if it is not in-line with the parent view it puts a section line. is there a way to have a single view arrow?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
Here is the issue we have found. While sectioning a view of an assembly in idw, the threaded lines of threaded features have a strange behavior depending on the section line used. I have attached a simple example that shows what he have found. Basically, if the section line is straight, threaded features show correctely. Independent of section participation. If the section has segments at different angles, then lines are not appearing.
The first three views have both parts excluded from section participation(Obviously, there isn't any real life need for this, but I did it to just simplify the illustration without adding a bunch extra parts) The base view is the top view or view showing the round shape. For the first example at the bottom, i simply projected the view to the left and made sure "Threaded Features" was selected. Threaded lines show fine.
Second example is the similiar, except the i used a section view instead of the projected view. Both parts are excluded. Section line is straight. Verticle in this example. Doesn't have to vertical as the line is straight.
Next example is similiar to the second, only difference is the section is not straight. You can see the threaded lines do not show. This is the problem we want to solve. How to make the threaded lines display!!!
Last example shows the same section, only this time the component is included in the section participation. And it works.
Any settings to change or a trick to make it work. Otherwise, i think i need to issue a support request with autodesk.
I have created a shaft and splined one end of it successfully. The shaft is the same diameter at both ends and I need to spline the other end as well but when I try, I get the following error messages, Cannot create iFeature. Not possible to create shaft groove. Splining the first end went without a hitch but Inventor absolutely refuses to spline the opposite end of the shaft. The shaft diameter is correct for the spline I have chosen (same as the major diameter)
View 1 Replies View RelatedHow can I put a 'center' into a shaft end in inventor? I have been doing this using the point/hole command and altering the csink details until I get something close to what I want but obviously not ideal.
Inventor 2014 PDS
I am using the design accelerator to create a shaft with multiple features. Works well. This shaft is 90"+ in length and although I realize we create in full scale, having it display into my drawing in full scale is unnecessary because one diameter is nearly 60" long. As such I would like to shorten it by using a shaft end, but cannot figure how to do it.
Just to be clear, by shaft end (term used in Mechanical) I refer to the squiggly lines that basically fudge the OAL of a component.
I am trying to create a simulation in which a shaft rotates and the a spur gear attached to the other end rotates with it. When I apply torque to shaft, the shaft does rotate but the gear does not. I believe I have done something wrong with the constraints.
View 1 Replies View RelatedI inserted a design component of a concrete wall and the hatch pattern came in with ansi31 instead of a concrete pattern and it is filled in. I dragged another wall style from tool palette and instead of the conc pattern, I'm getting the ansi31 pattern. Also tried the 3" base course with a gravel pattern and got the same thing.
View 7 Replies View RelatedI have written some VB code which updates parameters in a model. I would like the code to update the shaft parameters. The shaft is created using the shaft generator. I can use a parameters to set the lengths, diameters and fillets. But when the parameter updates the length stays the same. If I open the shaft assembly, click 'edit using design accelerator' and then click 'ok' in the window the shaft updates. Is there anyway to do this automatically?, maybe through iLogic or API?
View 1 Replies View RelatedQuestions below pertain to using Autodesk Inventor 2013:
What factor of safety value the Shaft Generator program uses when you run the calculations?
Does the factor of safety value change when you are not using the inventor user material option?
Lastly, when exactly do you know when to use the density option in the calculation properties or not?
i am trying to design a shaft with a cut out that would cut along the shaft a a set angle and wrap around the shaft.
I am going to have a bearing ride along the cut out and cover this to a linear motion but can't seem to grasp how you do this in inventor 2013.
Have attached a simple assembly..i have constrained the parts but how do i get the shaft/Fan to spin inside the case?
View 6 Replies View Related