AutoCAD Inventor :: How To Shorten Shaft By Using Ends
Feb 28, 2012
I am using the design accelerator to create a shaft with multiple features. Works well. This shaft is 90"+ in length and although I realize we create in full scale, having it display into my drawing in full scale is unnecessary because one diameter is nearly 60" long. As such I would like to shorten it by using a shaft end, but cannot figure how to do it.
Just to be clear, by shaft end (term used in Mechanical) I refer to the squiggly lines that basically fudge the OAL of a component.
View 2 Replies
ADVERTISEMENT
Nov 29, 2011
what I would like to know is the 'simple' way to create a keyway on a shaft in the middle that does not connect to the ends. End connecting keys are pretty basic to draw and extrude thru (maybe still a better way?)
File attached for viewing .
View 5 Replies
View Related
Nov 18, 2010
I have created a shaft and splined one end of it successfully. The shaft is the same diameter at both ends and I need to spline the other end as well but when I try, I get the following error messages, Cannot create iFeature. Not possible to create shaft groove. Splining the first end went without a hitch but Inventor absolutely refuses to spline the opposite end of the shaft. The shaft diameter is correct for the spline I have chosen (same as the major diameter)
View 1 Replies
View Related
Jun 4, 2012
How can I put a 'center' into a shaft end in inventor? I have been doing this using the point/hole command and altering the csink details until I get something close to what I want but obviously not ideal.
Inventor 2014 PDS
View 5 Replies
View Related
Nov 22, 2013
I am trying to create a simulation in which a shaft rotates and the a spur gear attached to the other end rotates with it. When I apply torque to shaft, the shaft does rotate but the gear does not. I believe I have done something wrong with the constraints.
View 1 Replies
View Related
Mar 28, 2012
I have written some VB code which updates parameters in a model. I would like the code to update the shaft parameters. The shaft is created using the shaft generator. I can use a parameters to set the lengths, diameters and fillets. But when the parameter updates the length stays the same. If I open the shaft assembly, click 'edit using design accelerator' and then click 'ok' in the window the shaft updates. Is there anyway to do this automatically?, maybe through iLogic or API?
View 1 Replies
View Related
Dec 30, 2013
Questions below pertain to using Autodesk Inventor 2013:
What factor of safety value the Shaft Generator program uses when you run the calculations?
Does the factor of safety value change when you are not using the inventor user material option?
Lastly, when exactly do you know when to use the density option in the calculation properties or not?
View 2 Replies
View Related
May 30, 2013
i am trying to design a shaft with a cut out that would cut along the shaft a a set angle and wrap around the shaft.
I am going to have a bearing ride along the cut out and cover this to a linear motion but can't seem to grasp how you do this in inventor 2013.
View 2 Replies
View Related
Jan 10, 2014
Have attached a simple assembly..i have constrained the parts but how do i get the shaft/Fan to spin inside the case?
View 6 Replies
View Related
Nov 13, 2011
I want make Screw Shaft from sheet metal and make Flat pattern.
[URL]
View 1 Replies
View Related
Apr 9, 2012
Trying to dimension a shaft in isometric view with various diameters. I am unable to find or select the centerpoints at the ends of the shaft. This causes dimensions to be crooked. How can i get the centerpoints to display so that they may be selected?
View 9 Replies
View Related
Nov 21, 2013
I'm using Inventor Professional 2014
I created several Parts with the Shaft Generator, and from one moment to another it always says that it can't update the part file with the new shaft when I press Ok.
Here is the original error, I'm german, so of cause its in german, but i discribed above what it says:
Komponente C:UsersManuelGoogle DriveProjekteEigene ÜbungenTest2Konstruktions-AssistentWelle1.ipt konnte nicht aktualisiert werden. Welle konnte nicht erstellt werden.
View 1 Replies
View Related
Mar 13, 2012
How I could go about creating a standard locknut thread, with the shaft generator (easy so far) BUT create a proper single rounded end key way? It does the end of the locknut groove with the rad that exits the shaft, but in complete truth (and 15+ years of experience.) I have never seen this done in the real world.
View 1 Replies
View Related
Aug 22, 2013
I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
View 3 Replies
View Related
Sep 17, 2013
is it possible to produce something like in the attached image using the design accelerator? Instead of making a cylinder and sketching the spline patterns and extruding? To me there must be a way besides sketching and use the library's of standard splines patterns and sizes.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Apr 27, 2012
I create a engine assembly and used "Drive Constrain" to rotate the crank shaft. The animation shows the crank shaft turns continuously in one direction. However, when I animate the constrain in Inventor Studio, the crank shaft turned in two different directions (see the vide file attached).
May I know why the crank shaft turns different direction?
View 9 Replies
View Related
Jan 26, 2012
I am trying to create a stress analysis on a shaft with two blower turbines attached. What feature in Inventor 2012 is the best way to represent centrifical force on the shaft due to the weight of the blowers and the inputs of rpm and torque.
View 3 Replies
View Related
Nov 6, 2012
When I open a drawing, Inventor 2012 update views. The default option is Background update". The problem is the update never ends... I can use Inventor, but the background update is ne finished, so I can't print a correct drawing.
If I disable Back upDate it is ok, but how can I use it ?
View 1 Replies
View Related
Jul 24, 2006
I got bounch of pictures that were taken with a very big zoom lens. As a result, the pictures got four black corners. Taking that away taking me a long time, creating three or four layers and then leveling them.
View 7 Replies
View Related
Mar 11, 2013
Basically a 2.5" id tube with a .06 wall thickness - 16ga exhaust tubing. Once I finaly got the drawing right, I cannot rip the part. The part has both ends cut. If one of the ends is left un cut I can create a sketch and put a point where I want to rip, and successully rip the part. If both ends has a cut end has a cut, there is a RIP error. How to overcome this headache? I am trying to make a template which If i can rip the part, I will be able to do so.
using autocad inventor
View 2 Replies
View Related
Jun 14, 2012
I've got the basics down, made a couple of basic parts and a simple assembly but having a bit of an issue with constraining a part at 2 ends.
basically, i've got a simple wheel with a piston attached, think steam engine drive wheel. Ive produced a frame to attached it all too and can position the wheel to the frame and piston to the wheel and the cylinder to the piston but when i try to constrain the other end of the cylinder to the frame it all seems to go wrong and things start jumping all over the layout.
View 4 Replies
View Related
Feb 22, 2013
I have been trying to unfold round tubing made through the frame generator. Here are the steps I took:
1. Used Frame Generator
* both ends of the tube are notched
2. Opened part and converted into sheet metal
3. Used the following tutorial: URL...
4. Was not working so I drew sketches on both ends of the notched tubing and added points
5. Used rip tool (point to point) and did not work
* I made sure the thickness was the same
I thought I was doing something wrong so I generated a new round tubing frame with only 1 end notched and the other end flat and followed the tutorial. IT WORKED! I have came to the conclusion that you can not use the rip tool on tubing that has both ends notched.Is there a way where I can cut the tubing in half so I have 2 individual pieces/files of tubing with 1 end flat and 1 end notched?
View 2 Replies
View Related
Oct 5, 2011
1. On the vertical upright pipes i want to make the the ends at the top flat (60mm lenght) .Can this be done from within the frame generator.
Inventor 2012
View 7 Replies
View Related
Feb 23, 2012
is there a way to only show hidden lines on a shaft with a hole in it to only show quadrens instead of 30 lines around the arc.
View 9 Replies
View Related
Dec 5, 2012
I have just made a new linetype but the ends look funny...I can't see why the ends, before and after the slash are different lengths? How to make them more even?
View 9 Replies
View Related
Mar 20, 2007
I am now using AutoCAD 2007 and I am a new AutoCAD user. How can I draw a vector or a line with one or two arrow ends in AutoCAD ? It is really simple to do that in MS Word
View 9 Replies
View Related
Mar 21, 2011
Im new to autocad and started designing my own house in archictecture 2010.
I've been having a propblem with the roof design at the moment, i am trying to get the gable ends of the roof to stand up on a 90 angle on both sides by editing the edges/faces but every time i do this the roof ends disappear so theres a hole in the sides of the roof and you can see into the house. How to do this so they do not disappear?
View 1 Replies
View Related
Jan 18, 2012
Is it possible to tag a shaft opening?
Which elements are not able to be tagged?
View 2 Replies
View Related
Dec 27, 2012
Is it possible to draw a line with fixed ends. I want to draw a line, representing a pipe, which connects two tanks. Whenever I move one of the tanks I'd like the line automatically to adjust its coresponding end in such a way that the line aways will start from the one tank and end on the other. Is it possible that?
Another question, is there some option, such that whenever two line cross each other, one of the line automatically to go over the other. By this I want to show on the drawing that the two lines are not connected. Something like the following "sketch"
View 3 Replies
View Related
Jan 8, 2014
I'm working in Civil 3D 2012 and I have an alignment going through 3 DI's and a MH. When I say to draw this in profile view the pipes end inside the DI sometimes. Not at the middle but inside it even though my DI has a near 0 wall and floor thickness. The place where the pipe ends is where the edge of the DI should be but it is being shown outside that for some reason. What can I do? I inserted an image. The piece that I drew that is supposed to be a DI in profile view is rotated wrong.
View 5 Replies
View Related
Mar 26, 2012
I'd like to make a custom linetype that is a the standard DASHDOT linetype, but with a small circle drawn on the ends of the line or arc (and only at the ends).
View 4 Replies
View Related
