Im new to autocad and started designing my own house in archictecture 2010.
I've been having a propblem with the roof design at the moment, i am trying to get the gable ends of the roof to stand up on a 90 angle on both sides by editing the edges/faces but every time i do this the roof ends disappear so theres a hole in the sides of the roof and you can see into the house. How to do this so they do not disappear?
1.How can I edit the roof in attached dwg to be like in attached jpg?
One option I think it would be to convert it to roof slab.
What is the disadvantage (if any) to convert ia roof to roof slab?
Can I create it in other way ?
2. In section 2, the first floor walls ends in 90 degrees angle at the roof. Can the walls be edited so that the joint line with the roof follow the roof slope?
How to make hip roof turn gable part way up the roof instead of at the bottom (which would be a gable roof).
View 7 Replies View Relatedwhat the roof elevation property relates to and why? Actually, I know that it is the initial insertion point of the roof baseline, but why doesn't it update with grip edited changes in the elevation of the baseline? See the attached file. The three x-lines converge on 0,0,0. The roof elevation is stated as 0. Obviously that property is meaningless. Considering the importance of roof elevations and making them meaningful, you'd think there would be some rhyme or reason to that property.
View 4 Replies View RelatedHow to ascertain the volume of a roof formed in Autocad Architecture?
View 3 Replies View RelatedACA 2011...what the best way was to add rafter tails to a roof slab. Someone responded (and even attached a dwg) of a way to do it with a curtain wall. I'm not very well versed in curtain walls, though I get around okay with door & window assemblies, and they seem similar, I just don't really know what differentiates them within the program. That aside, any way to create exposed rafter tails more efficiently than arraying mass elements?
View 1 Replies View RelatedI am trying to add a window vent to my roof slab, I'm using autocad architecture 2013.
View 2 Replies View RelatedI have modeled a simple house. How can I change the color or even show something similar to shingles?
View 1 Replies View RelatedI quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies View RelatedI am using 2011 and have created a project for a 2 story structure. I have constructs for each floor, each floor slab and roof slab.
In which construct do I apply the roofline command? I am unsuccessful so far. Does the roof slab need to be in the same construct as the walls?
I am using AutoCad Architecture 2011. In the Style Manager, I created a wall style using a 8"CMU unit plus a 2" insulation board. I have a gable roof slab that intersects with the wall. I want to trim the insulation board along the bottom of the roof slab, and show the CMU above the roof slab.
View 3 Replies View RelatedAfter having a problem projecting my walls to my roof slab (flat roof), which worked fine in previous sessions; and then trying the standard solutions of making sure my walls clean up properly, etc., I determined the problem was actually in that the walls do not like to project to a roof with components. In my last work session, I added a component to my roof. I switched back to a "standard" roof slab, projected the walls, and then switched back again to my roof with components.
View 1 Replies View RelatedI am drawing a house with a hip roof. The roof has a overhang with fascia and soffit. What is the best way to construct the components of the roof system. Should the hip roof and the soffit with fascia to be one system or two separate systems?
View 3 Replies View RelatedI have a Material Definition for my Roof Object. I prefer to keep it a Roof Object instead of breaking it into slabs. See Display Properties image for settings. I have Surface Hatch turned on.
Model views show the hatch correctly.
Elevation views show the hatch correctly.
Plan views do not show the surface hatch at all.
How can I get the surface hatch to show in plan? I have tried changing the cut plan height. It seems I am making something more complicated than it should be.
I know that Archtecture uses views differently than the other AutoCAD verticals, but I'd still like to find a solution to this. When I use the 3DCLIP command to create section views of models created in Architecture, the wall and roof objects do not clip correctly. The clipping planes do not create sections of those objects.
Is there a way to get the 3DCLIP command to actually intersect wall and roof objects?
I want to make a steel deck roof with mineral wool insulation on top. My problem is that I don't know how to do the metal deck.
It should be a slab, a roof slab or a structural member? How do I create it? I attached a drawing with how it should be.
I know the possibility of a plot style just disappearing is slim to none, but I have this user that constantly claims her plot styles have "disappeared".
When I check them, the entire "Plot Style" folder is gone. One day it's there the next it's gone.
She also has this problem with the DWG to PDF print option. It was there, now it's gone. She claims she isn't deleting anything. I will get them back on her PC and a few months later they will be gone.
She is a contract worker who also spends time at her office off site. I am not sure what version of AutoCAD she is using. I manage an AutoCAD group of about 20 users and none have this problem.
We are using ACA2010 and use the project navigator to bring constructs into views then bring the views into sheets, which has been working great, but in the last few months we have gone to a sheet only to find that the view no longer contains the constructs. I was working on a project on Friday and the Site Plan view no longer had the site xrefed into it which I fixed, now today the Site Plan is fine but the Roof Plan is empty. This is not the 1st project this has happened to but it is the 1st time it has happened to me so I know nobody changed something they should not have. Is there a known bug in 2010 or something I should check. I don't want this to happen to the Floor Plan if it does I will lose all my dimensions.
View 2 Replies View RelatedEvery so often while working in LT-2010 the cross hairs will vanish from the screen but you are still able to pick items (as u move the mouse lines, etc hi-light in the usual way) also when you come outside the drawing area the mouse pointer will reappear (only while outside the drawing, in the command bars, etc)
the only quick way to return the cross hair to normal is to hit another tab & then re-enter the tab or model i was in. there seems to be no particular command that causes this glitch .
If we have both the Xref and the File that it is referenced into open on one of the computers here and we reload, the Xref disappears. If we do an undo and close the Xref it reloads without problem.
I tried to replace the user profile from another PC that doesn’t have the problem, but it didn’t work. Is there a Registry setting that cause this behavior? All stations set to “Enabled with copy”
AutoCAD 2012 Arch.
We have just installed ACA 2012 on one of our workstations and randomly the crosshairs will disapear in paperspace. We will still get the cursor icon if we hover over properties and paletts etc. We have the latest service pack and ribbon hotfix. Searching hasn't come up with much.
View 4 Replies View RelatedI'm not sure what happened but all of a sudden when I try to open an existing drawing it no longer pops up a box to browse, it asks me in my command bar at the bottom to type in the name of the drawing. The same thing happens when I try to "save as" a drawing... How to get this back to normal?
I have attached a Jpg of both instances...
I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
View 1 Replies View Relatedwhen doing the "distance" command, typically as you go from point to point, the distance will be listed on the page next to my cursor as I go. Then if you left click, right click, it will list the final distance down in the command window. The machine in question no longer displays the distance on the page as you go. This is a very useful feature for us, and although we can distance things, using the text readout in the command window takes much longer.
View 2 Replies View RelatedI am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedHow do you get the roof soffit to have the same rafter cut as the roof?
View 1 Replies View Relatedcreat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedI have just made a new linetype but the ends look funny...I can't see why the ends, before and after the slash are different lengths? How to make them more even?
View 9 Replies View RelatedI am using the design accelerator to create a shaft with multiple features. Works well. This shaft is 90"+ in length and although I realize we create in full scale, having it display into my drawing in full scale is unnecessary because one diameter is nearly 60" long. As such I would like to shorten it by using a shaft end, but cannot figure how to do it.
Just to be clear, by shaft end (term used in Mechanical) I refer to the squiggly lines that basically fudge the OAL of a component.
I am now using AutoCAD 2007 and I am a new AutoCAD user. How can I draw a vector or a line with one or two arrow ends in AutoCAD ? It is really simple to do that in MS Word
View 9 Replies View RelatedWhen I open a drawing, Inventor 2012 update views. The default option is Background update". The problem is the update never ends... I can use Inventor, but the background update is ne finished, so I can't print a correct drawing.
If I disable Back upDate it is ok, but how can I use it ?