I am trying to bring in a block from the design center and some of the parts that were created as the block are not showing up. If there is a layer setting or another setting in the drawing that I am missing?
View 3 RepliesWorking in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
how to convert the block to 3d (like bed) from design center?
View 1 Replies View Relatedi can't drag a block from the design center into any drawing. i have to go into the design center right click on the block, click copy, then go back to my drawing and paste the block. this has just started happen, before i was able to drag and drop with no problem. there is no error message the only thing that happens when i try to drag a block from the design center is when i'm back in the drawing the cross hair has a circle.
View 1 Replies View Relatedwhen i pick design center from the ribbon nothing happens. Even if i type in adcenter nothing happens.
View 2 Replies View RelatedI am wondering if there is a way for the images of blocks in the Design Center viewing window to be bigger. Its hard to see what all is in the block.
View 2 Replies View RelatedWe have both 2012 and 2013 AutoCAD at work, and both versions are having the same problem. When adding favorites in Design Center, it does not show up. The shortcut is actually there if I browse using Windows Explorer, but it does not show up in Design Center. I guess this is some issue where shortcuts do not show up, which is beyond me because that is how the Favorites system is supposed to work.
I should add, this is not an issue on some of our older machines running AutoCAD 2009.
how do i import from the design center into my project
View 1 Replies View RelatedI have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
View 1 Replies View RelatedMy design center has the content of my entire computer on it. How do I adjust it so that only the general blocks are present on there, such as doors, plants, etc.?
View 2 Replies View RelatedI have a problem with autocad 12 when i write command DC "design center" it don't work correct it show me the box but don't expand any drive to select !
View 2 Replies View RelatedWorking in Autocad 2010, needed to insert my title block into my design, I know how to insert, but I can't get design to work in the middle of title block.
View 3 Replies View RelatedI have a problem with a File in Autocad.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
I played around with the 2010 Block Editor, it must be 5 times more efficient that where it is in 12. Using 2014 like the new Block Editor?
View 2 Replies View RelatedHow do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedI am tired of re-creating Description Keys everytime I want to bring in Survey Points into a drawing. I have tried to drag and drop, but that does not seem to work for me. I can's copy it. Is there a way to get Civil 3D 2010 Description Keys into Civil 3D 2012.
View 3 Replies View RelatedI have never written a script but I figure this task is a good place to start. We currently have almost 8,000 files that all use different dimension styles, leader styles, layers and layouts. (All before I got here) I have successfully used the design center to where we can open an old drawing then go through and add all of the new 'standard styles, layouts, and layers'
can I write a script that will add all of these at once. It is not that it is that terrible of a job to do, but like I said my thought is it will be a good way to learn more about scripts, and we have a lot of drawings this needs to happen with.
How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Inserting blocks from design center coming in bigger scale...what should I do to control the scale factor?
I have being dealing with INSUNITS factor without success...
How do I open the Design Centre and see "blocks" that are bound xref with $0$ in the name, unless the bindtype is set to insert.
I'm not a monster, I just look like one.
Can you open two dwgs and copy blocks from one design center to the other?
View 3 Replies View Related I have started receiving the following error:
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
Map3D 2012
Intel Core2 Duo
2.66ghz
3gb ram
ACA2014. Need instructions on how to import a file into the Design Center.
View 3 Replies View RelatedI cannot get the DC Online tab to show on the Design Center. I have enabled it through the CAD manager Control Utility. I have shut down CAD and restarted it and still no tab.
View 3 Replies View RelatedIn older versions of AutoCAD they had sample drawings in Design Center with blocks that were useful. They included a drawing for Home Space PLanning, Landscaping, etc. where these files or blocks are found in 2013? I want to use some of the sample blocks that I had access to in older versions of AutoCAD.
View 2 Replies View RelatedCan I take a block that is currently in my drawing and put it into a tool palette? I know how to move blocks from the Design Center to a Tool Palette but I don't know how to get my blocks into the Design Center.
Scenario: We use a number of different fasteners in our drawings but they aren't the fasteners that are currently in the Design Center under "fasteners". I am manually redrawing the same fasteners each time I start a new drawing.
Why is the design center not coming on screen. When I press the button, the command says adccclose
View 3 Replies View Relatedi lost the location of my 3d template in DC., i cant put furniture on my plan
View 1 Replies View RelatedSince upgrading to AutoCAD LT 2011 I cannot use the Design Center for inheriting objects such as layers, blocks etc between drawings. I have a few different drawings open which are displayed in the tree view of the 'open drawings' tab in the Design Center. But the objects of the drawings are not displyed. No +-sign in front of the drawing name, no icons in the icon field, just a summary at thebottom saying '0-items'.
I have tried reinstalling AutoCAD.
I'm a new user of AutoCAD. I am creating a template, but when I try to drag or copy and paste the layers. blocks, dimstyles, multileaderstyles, etc. from design center, a message pops up that the parameter is incorrect, or it would just not drag and drop. I have the original drawing open as instructed, but nothing seems to work.
View 4 Replies View Related