AutoCAD Civil 3D :: Cannot Get DC Online Tab To Show On Design Center
Nov 1, 2012
I cannot get the DC Online tab to show on the Design Center. I have enabled it through the CAD manager Control Utility. I have shut down CAD and restarted it and still no tab.
i can't drag a block from the design center into any drawing. i have to go into the design center right click on the block, click copy, then go back to my drawing and paste the block. this has just started happen, before i was able to drag and drop with no problem. there is no error message the only thing that happens when i try to drag a block from the design center is when i'm back in the drawing the cross hair has a circle.
I'm wondering if Autodesk has additional items possibly on their website that we can add to the content center. Or is their entire catalog already included when we install Inventor? I'm looking for ferry cap screws but haven't found them anywhere. I'm thinking I will have to create them myself and add them to the content center. I'm using Inventor Professional 2013.
Inventor Professional 2013 Intel Xeon W3680 @ 3.33Ghz 12GB DDR3 RAM NVIDIA Quadro 2000 GPU Windows 7 Professinal 64-bit
i have a long alignment going through a lot of creeks. right now the creeks are in xref just polylines but it intersect with alignments at areas.
is there a quick way to show all these lines on profile for design and drafting purposes? ideally want to just show a line at each intersection would be fine.
tried using pipes takes too long to set up. this is one important feature to have in the software.
i can program it again but i have not enough time to finish this project by mid october if i keep programming things.
Civil 3D 2012 Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2 Home: 3930k, 12GB, GTX 590, U3011, QX2710
How do i change the colour on a masthead design I purchased on-line?
The masthead is a paisley type design which is to become the border of my new website but when i try to change the colour in the way i thought i should it changed the colour of the mashead to a solid colour thus losing the design?
I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
I have never written a script but I figure this task is a good place to start. We currently have almost 8,000 files that all use different dimension styles, leader styles, layers and layouts. (All before I got here) I have successfully used the design center to where we can open an old drawing then go through and add all of the new 'standard styles, layouts, and layers'
can I write a script that will add all of these at once. It is not that it is that terrible of a job to do, but like I said my thought is it will be a good way to learn more about scripts, and we have a lot of drawings this needs to happen with.
FATAL ERROR: Unhandled Access Violation Reading 0x0008 exception at 1286aebh
I had been getting fatal errors on opening the program with the very same message. That has since passed but now it is happening when I try and open ADCENTER either at the command line or the ribbon button.
In older versions of AutoCAD they had sample drawings in Design Center with blocks that were useful. They included a drawing for Home Space PLanning, Landscaping, etc. where these files or blocks are found in 2013? I want to use some of the sample blocks that I had access to in older versions of AutoCAD.
We have both 2012 and 2013 AutoCAD at work, and both versions are having the same problem. When adding favorites in Design Center, it does not show up. The shortcut is actually there if I browse using Windows Explorer, but it does not show up in Design Center. I guess this is some issue where shortcuts do not show up, which is beyond me because that is how the Favorites system is supposed to work.
I should add, this is not an issue on some of our older machines running AutoCAD 2009.
I am trying to bring in a block from the design center and some of the parts that were created as the block are not showing up. If there is a layer setting or another setting in the drawing that I am missing?
Can I take a block that is currently in my drawing and put it into a tool palette? I know how to move blocks from the Design Center to a Tool Palette but I don't know how to get my blocks into the Design Center.
Scenario: We use a number of different fasteners in our drawings but they aren't the fasteners that are currently in the Design Center under "fasteners". I am manually redrawing the same fasteners each time I start a new drawing.
How to access the Online (360/synchronization etc) functionality in C3D 2013 - there is apparently an Online tab in vanilla AutoCAD but nothing in mine - not even in the drafting workspace....?
I have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
My design center has the content of my entire computer on it. How do I adjust it so that only the general blocks are present on there, such as doors, plants, etc.?
Since upgrading to AutoCAD LT 2011 I cannot use the Design Center for inheriting objects such as layers, blocks etc between drawings. I have a few different drawings open which are displayed in the tree view of the 'open drawings' tab in the Design Center. But the objects of the drawings are not displyed. No +-sign in front of the drawing name, no icons in the icon field, just a summary at thebottom saying '0-items'.
I'm a new user of AutoCAD. I am creating a template, but when I try to drag or copy and paste the layers. blocks, dimstyles, multileaderstyles, etc. from design center, a message pops up that the parameter is incorrect, or it would just not drag and drop. I have the original drawing open as instructed, but nothing seems to work.
I've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?