I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
way in which you can create a selection with the marquee, and then rather than MOVE the contents of that selection, move the SELECTION ITSELF with the MOVE TOOL'S alignment tools (like left, center, right, top, mid, bottom)
View 9 Replies View RelatedI took a series of photos out of which I want to make a time-lapse movie.
There are 2 points in each photo that I need to have snapped to a center line, so that each photo is vertically straight.
Is there a way in GIMP to specify 2 points and have the entire image move so that those two points are along a central line?
Essentially what happened was, each photo that I took was not perfectly vertical, even though I took pains to ensure that each one was.
When I try to print and select "center" the image does not center on the page. CS5 worked fine originally but after the last update it too seems to have this issue. From what I can observe it seems as if someone thought that showing the printable area on a page was useful and somehow that may have been worked into the calculation of what centered (on the long dimension of a print) is. Engineering aside, if you actually try to sell your work, your client / customer only sees that the image is not centered on the physical sheet. They don't care about the printable area. The only work around I have found is to uncheck "center" and key in 50% of the difference between the actual print size and the actual paper size as a margin. I don't want to scale prints. I need to print to specific dimensions.
For reference I am using a PC running Windows 7 and an Epson 4900 printer
I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
If i open a new .psd file of any size and i have guide lock on, I get lock lines as i move and object twards the center of the canvas.
So how do you get ps to place guides (H&W) at the center of any doc.
The guides do not lock to a center when i pull them from the ruler. I can not figure out a way to make the ruler show zero at a center point and go =/- out from a zero center point like a number line either.
So, How do i find the center of a doc?
I'm currently using AutoCAD Electrical 2013, but I think that this may fall under a general AutoCAD question.
The company I'm working for does panel layout drawing that require upwards of several hundred holes to be punched into it. Right now, we use ordinate dimensions to show center points of all the holes for our hole punch machine. Recently, we decided to start putting the X,Y dimensions on an Excel spreadsheet for easier reading for our punch operator. What I'm looking for is a way to either A) extract the ordinate dimensions from AutoCAD and into an excel file or B) Extract the hole center locations from a specified base point to an Excel spreadsheet. Is there an easy way to do this or do I have to go one by one and type it out?
how to I get my center point to show up as a dot as it did in inventor 2010 so I can use it as a point to constrain sketches to?
View 7 Replies View RelatedI cannot get the DC Online tab to show on the Design Center. I have enabled it through the CAD manager Control Utility. I have shut down CAD and restarted it and still no tab.
View 3 Replies View RelatedIs there an option to show center mark of a circle?
View 6 Replies View RelatedFor some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.
why the design center does not show up when the command is executed !!
View 1 Replies View RelatedIn the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
In Photoshop / Illustrator, when I create a polygon, and rotate it around it's center point it wobbles. When I scribe it inside of a perfect circle, and rotate it around the circle's center point it rotates smoothly. Basically proving that (at least according to these Adobe products) that the center point of a circle is different than the center point of a polygon scribed inside of it.
An image – the dots in the center are the corresponding center points according to Adobe:
[URL].......
This is incorrect according to basic math. Is Adobe aware of this bug?
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
If I take a photo of document too close, the text is big in the center and small at the edge, the line at the edge is also curve. Is there a way to fix it in Photoshop or others application?
View 4 Replies View RelatedI want to center some type on an image. When I go to the move tool, and highlight the text layer and the background layer then to the align menu, it sometimes works, but more often than not it does not.
View 2 Replies View RelatedI have googled this and searched forums but cannot find working solution.
I am using cs2.
Created a new file with transparent background (150x75 pixels)
Drew a rounded rectangle shape and added new fill color layer.
Selected text tool and entered text.
In trying to move text to center, I can justify for horizontal but it will not center vertically. Text seems to hop up or down just off center.
Is there a way that i can be sure an element on my screen is perfectly centered horizontally and vertically?
View 8 Replies View Relatedcan anyone tell me how to
center a layer in photoshop 6?
Im creating a business card for myself and the thing is i have never really worked too much with text on photoshop. So at the moment when i put text into the picture i just eye out whether its in the center, so as far as i know it may not be perfect. How do i make sure that the text i am putting in is definitely center?
Also im using a gradient from the center to the edge and once again im guessing if its center, how do i ensure it is the center point i am working from?
I have an illustrator file (various circles and half circles) built with various layers, I would like to copy and past these layers into Photoshop and change them to a shape layer, but when copying each layer and pasting the vector falls in slightly different place to the illustrator file, how can I keep the position the same as the illustrator?
View 6 Replies View RelatedI created a web page using Photoshop slicing. How do I center the web page on the browser?
View 9 Replies View RelatedI recently upgraded to cs6, and now when I use the rotate view tool the center of rotation drifts down and to the right as I rotate. It continues to drift until it reaches the bottom and then it jumps to the top and continues down again. This is really affecting my ability to rotate quickly and accurately.
View 4 Replies View RelatedIm using actions to scale and center batches of images to make thumbnails. I have a master psd that is 75x75px. I have a folder of jpgs of various dimensions. The batch action opens each jpg, scales it, and is supposed to move center of the small layer to X=36 and Y=36px. The scaling always works but the layer is way, way off. I tried using percent for the X&Y, but the % sign is rejected by Pshop.
View 3 Replies View RelatedI am putting a logo on top of a background. Is there a quick keystoke or shift or alt option to use if I want to center the logo in the image? It's mostly a square image 170x151px.
View 3 Replies View RelatedI have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedI need to squeeze a photo a little, along the vertical middle line, so that the final shape would be like a concave lens placed horizontally (instead of square).
View 1 Replies View RelatedI am working on a graphic that has a large circle in the center surrounded by 7 smaller circles. How do I evenly distribute the 7 outer circles around the larger center circle. I am using CS2.
View 3 Replies View Related