GIMP :: Snap To Center Line?
May 28, 2012
I took a series of photos out of which I want to make a time-lapse movie.
There are 2 points in each photo that I need to have snapped to a center line, so that each photo is vertically straight.
Is there a way in GIMP to specify 2 points and have the entire image move so that those two points are along a central line?
Essentially what happened was, each photo that I took was not perfectly vertical, even though I took pains to ensure that each one was.
View 2 Replies
ADVERTISEMENT
Oct 26, 2007
I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
View 1 Replies
View Related
Feb 22, 2012
I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
View 4 Replies
View Related
Dec 24, 2011
Everything is on one layout/sheet.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
View 9 Replies
View Related
Aug 19, 2013
I need to snap to guide lines but the only snap I can get is to the endpoint, which results in some very diagonal lines. I actually have ortho turned on because I need only 90 degree angles. Sometimes I need to move an entire line and I would like it perfectly lined up to the guideline. The line being moved is part of a polyline.
I sometimes do need to start or end at an endpoint but how do I do that then also snap to just anywhere on the guideline while maintinaing a 90 degree angle?
View 2 Replies
View Related
Aug 16, 2011
tan.jpg
i want to snap this line to where it would be at a tangent to the arc (as right), but as you see (left) when i hover with TAN snap it picks a tangent from the pick point, not from object's orientation.
at the moment i construct a tangent by rotating a copy of my line by 90°, and snapping it to centre of the arc. then extend out past arc, where the intersection is now the point i originally wanted to pick. make sense? gotta be a better way!
View 9 Replies
View Related
Oct 9, 2013
When trying to place a construction line through an intersection the line offsets depending on where the cursor is placed. When the on screen prompt ask to specify through point. It defaults to 0 and I enter in 45'. It comes back invalid. believe this is a snap setting somewhere but I cant seem to find it.
View 2 Replies
View Related
Nov 21, 2012
I have autocad 2011.I am trying to get my autocad to snap to the closest line.
I draw a pline at a 45 degree angle. I press enter and I click the starting point again (in this instance the bottom point) and I draw another line near the other one, the nearest snap indicator shows up, but when I type "2" (units in Meters) and press "enter" the line is drawn where the cursor is and not along the 45 degree angle.
My goal is to get the second line to follow the first line with a different length.
View 6 Replies
View Related
May 12, 2011
How do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
View 3 Replies
View Related
Dec 9, 2011
I must not be the only one required to produce 2d dwg's for work.
I'm using INV 2009 and our vendor swears up and down in 2012 every thing is fixed, which somehow I doubt since they failed to fix the conversion from idw to dwg in the previous 12-13 releases.
Anyways, my problem today is that the dimiension lines I spent so much time making them meet our industry and company standards in my idw are all wrong in the dwg's I saved.
(please see attached).
View 1 Replies
View Related
Apr 18, 2012
I want to join a couple of lines with arcs. Unfortunately I have got a dxf created with CATIA. When I try to join them with pedit it does not work.
If I move the end point of the circle away and snap it back to the line, I can join them. Blending the Curves together is working (this shouldn't if the endpoints match, right?)
You can see it in this screenshot:
(On the left the circle and line are joined after I snapped them together, on the right they are connected using "Blend Curves" as you notice the tiny white connection)
So here it leads to my question:
Those lines seem not to be lying end to end together so I can join them. Is there a function to snap them together or to automatically ignore/fill such a little gap?
View 8 Replies
View Related
Nov 26, 2012
When I use a tool such as 'move'/'select base point' in the sketch environment, I used to be able to select line midpoints.
Is this no longer possible? My constraint options seem to be fine.
Recently upgraded to 2013
View 6 Replies
View Related
Apr 19, 2011
I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies
View Related
Dec 12, 2013
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies
View Related
Oct 16, 2013
Any way to snap guides to the edge of a layer? Also want to snap layers to the edge of other layers and snap guides to the center center of layers.
View 1 Replies
View Related
May 7, 2013
I use GIMP 2.6.8 - when I switch to "path" tool or to "free select tool" mouse pointer is allowed to set vertices of the path or selection on non-integer coordinates (i.e. at x=13.5 and y=26.8 pixels)
How can I disable this feature and make mouse pointer (or vertex) snap to pixel boundary (or even to grid). I want it to be able to create paths / selections more accurately sometimes.
(or could I at least enter coordinates for each next vertex manually)
View 1 Replies
View Related
Sep 3, 2011
That option seems to cause the corners to snap to some other points which aren't the grid, and making vertical lines impossible.
Is there a way to make it use the grid just like how the rectangle select tool does?
View 2 Replies
View Related
Feb 10, 2013
I have got a 2D profile set up for new drawings. When l start a new 2D drawing l just save as and then start the drawing. This time l found all my Solid Lines and my Hidden Lines are all coming out has Center Lines. All are loaded right. What have l done and not realize.
View 2 Replies
View Related
Dec 24, 2009
Im triyng to create a centerline from a line that was converted to outline then outline converted to Object. Once its converted to a object can i create a center line inside that object
View 14 Replies
View Related
Apr 29, 2012
I am taking my first semester and my instructor is not very good. I have a circle that I have arrayed 3 smaller circles on. On 4 of the circles I need to rotate the centerlines about 45 degrees. Is there a way to rotate these?
View 4 Replies
View Related
Nov 8, 2011
We recently had a draftsman that drew with snap on (he no longer works here), and now all the drawings he worked on have this setting turned on. I thought it would be as simple as opening up the drawings and either hitting F9 or clicking on the toggle to turn off snap. That doesn't seem to be the case. Snap mode seems to be tied to individual sheets, and every viewport. I have multiple sheets in a drawing and each sheet has multiple viewports. The last thing I want to do is open every drawing, click in every viewport on every sheet to turn off snap.
I have snapmode set to 0, but it will only turn it of in whatever sheet or viewport is active. I have to write a lisp routine that will go through every viewport on every sheet to set snapmode to 0?
View 9 Replies
View Related
May 6, 2012
Object Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies
View Related
Oct 17, 2013
Is there a way to make an outline that is either only on the inside or the outside of the center line of the outline? I know that the default in Corel is to center the outline on the center line of the outline.
View 2 Replies
View Related
Mar 26, 2012
How to change the text of the short of cut of the Center Line (the CL combonation) its a text we dont use and it wont change.
It doesn't match our text and I don't know if i could change that.
View 2 Replies
View Related
Apr 3, 2012
When I click on line command and then draw a line on my screen it will not identify the center of the line. That is it will not show green triangle on line.
View 4 Replies
View Related
Mar 7, 2013
I need a creative way to do something I know can be done in SW and Pro-E but as far as I know can not be done in Inventor to date
I am using the origin center line and semitry to control a box and its associated geometry and want to control the position or offset of a second box relitive to the first using a center line associated to the second box with a dimension. Problem is that the dim will only control its off set position relitive to the initial side from which the dim was placed. I.E. if the dim is placed when the CL of the second box is to the right it can not be moved to the left (what would in essence be a -dim condition) understandably Inventor does not like that but SW and Pro-E can use there little wheel and roll it down to 0 and then back up to a + dim in the opposit or in this case Left direction.
I know that I could place a dim off the interior wall of my first box geometry and associate it to the CL of the second box but the math to that may or may not be appropreatly effective in other words in condition A it may need to be 1/3 of d1 and in condition B it may need to be 2/3's of d1 or some other dimension.
I would love to be able to do this via iLogic or perhaps something to do with the placement relitive to a construction geometry utilizing a circle but so far I have not found a viable solution.
View 1 Replies
View Related
Jul 16, 2008
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
View 2 Replies
View Related
Jan 8, 2013
We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
View 3 Replies
View Related
Oct 27, 2013
I have this intersection and I want to make a roundabout there. The first step is to make two center lines of the roads. How can I make these centre lines perfectly aligned? The lines that you see in the attachment are freehand made.
View 6 Replies
View Related
Jul 14, 2013
Is there a way to draw center line of a pipe, trench etc.. and when drawn the line apply the width-height-depth or circumference?
View 2 Replies
View Related
Apr 15, 2013
I'm self taught on Illustrator, so I occasionally come across something that's probably really basic, but I am totally stumped. I think this is one of those things. All of a sudden, some of my Illustrator files have a dashed line running vertically down the center of the page. I can manually delete the dashes, but what is this and surely, there's a better way to get rid of it?
View 6 Replies
View Related
