Im triyng to create a centerline from a line that was converted to outline then outline converted to Object. Once its converted to a object can i create a center line inside that object
View 14 RepliesIs it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
Is there a way to make an outline that is either only on the inside or the outside of the center line of the outline? I know that the default in Corel is to center the outline on the center line of the outline.
View 2 Replies View Relatedthe best way I can create writing in the center of this heart in the sand?
[URL]
Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
When I have a group of objects selected and I go to create a boundary around the entire thing to use as a cut line, sometimes parts of the group are excluded. I made sure all of the objects were on the same layer and that everything was indeed selected, but nothing I do seems to make a difference.
View 2 Replies View RelatedIf there is a way to create a horizontal guide line that will stop at the next vertical guide line instead of going all the way across your template? If not, how would I submit that as something new to add to the next program coming out....it would be great to have that as an option when setting up your guide lines.
View 3 Replies View RelatedIs it possible to create a custom stroke that doesn't scale to the length of the line you assign it to? I am trying to create a stroke that looks like a chain but when I create a custom brush, I have to almost create the brush pattern the same length as the stoke it gets applied to in order to avoid the chain links bunching up or being grossly stretched out along the assigned path.
Is there a setting or some other function that can accomplish this? Is there an easy way to assign a shape to along a path other than blend?
In the end I want to be able to assign a premade pattern to a line without that pattern being distorted or scaled along the path it is assigned to.
I want to create a line that looks like a set of railroad tracks - two rails and ties - or a single track with ties half as long as the 2 rail tracks would be.
I want to be able to use it the same as the lines that are installed with CDR 12 - scalable, editable points, curving, extend the length by pulling an end point, set point size , etc.
Basically anything I can do to and with an installed line, I want to do with my custom one.
I'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
I have got a 2D profile set up for new drawings. When l start a new 2D drawing l just save as and then start the drawing. This time l found all my Solid Lines and my Hidden Lines are all coming out has Center Lines. All are loaded right. What have l done and not realize.
View 2 Replies View RelatedI am taking my first semester and my instructor is not very good. I have a circle that I have arrayed 3 smaller circles on. On 4 of the circles I need to rotate the centerlines about 45 degrees. Is there a way to rotate these?
View 4 Replies View RelatedI took a series of photos out of which I want to make a time-lapse movie.
There are 2 points in each photo that I need to have snapped to a center line, so that each photo is vertically straight.
Is there a way in GIMP to specify 2 points and have the entire image move so that those two points are along a central line?
Essentially what happened was, each photo that I took was not perfectly vertical, even though I took pains to ensure that each one was.
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View RelatedHow to change the text of the short of cut of the Center Line (the CL combonation) its a text we dont use and it wont change.
It doesn't match our text and I don't know if i could change that.
When I click on line command and then draw a line on my screen it will not identify the center of the line. That is it will not show green triangle on line.
View 4 Replies View RelatedI need a creative way to do something I know can be done in SW and Pro-E but as far as I know can not be done in Inventor to date
I am using the origin center line and semitry to control a box and its associated geometry and want to control the position or offset of a second box relitive to the first using a center line associated to the second box with a dimension. Problem is that the dim will only control its off set position relitive to the initial side from which the dim was placed. I.E. if the dim is placed when the CL of the second box is to the right it can not be moved to the left (what would in essence be a -dim condition) understandably Inventor does not like that but SW and Pro-E can use there little wheel and roll it down to 0 and then back up to a + dim in the opposit or in this case Left direction.
I know that I could place a dim off the interior wall of my first box geometry and associate it to the CL of the second box but the math to that may or may not be appropreatly effective in other words in condition A it may need to be 1/3 of d1 and in condition B it may need to be 2/3's of d1 or some other dimension.
I would love to be able to do this via iLogic or perhaps something to do with the placement relitive to a construction geometry utilizing a circle but so far I have not found a viable solution.
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
View 3 Replies View RelatedI have this intersection and I want to make a roundabout there. The first step is to make two center lines of the roads. How can I make these centre lines perfectly aligned? The lines that you see in the attachment are freehand made.
View 6 Replies View RelatedIs there a way to draw center line of a pipe, trench etc.. and when drawn the line apply the width-height-depth or circumference?
View 2 Replies View RelatedI'm self taught on Illustrator, so I occasionally come across something that's probably really basic, but I am totally stumped. I think this is one of those things. All of a sudden, some of my Illustrator files have a dashed line running vertically down the center of the page. I can manually delete the dashes, but what is this and surely, there's a better way to get rid of it?
View 6 Replies View RelatedI created a Yin/Yang symbol, but for some reason it has a vertical line through its center. The line disapears sometimes after I move the symbol.It disapears in outline mode. Why is it thre? How do I get rid of it?
View 5 Replies View RelatedI made a bunch of lines, then used the bend command to make curves where they intersected. I'm trying to put lines connecting A to C and B to D. How do I constrain the ends of the lines to the center of the curves?
View 9 Replies View Relatedhow to put a center line on an open ended slot. Say in the front view you can see the radius of the slot with horizontal tangents running to the end of the object; this isn't the problem. When creating the top view, you only see one hidden line indicating the arch, but the other side is just open to the end. You have no means of finding bisectors.
I've added a jpg file, looking for the center line in the top view.
I have problem with medians ( Both MedianRaisedWithCrown and MedianRaisedConstantSlope) when crossing center line ( i.e whole median has to cross the center line).
I have median that goes along the centerline and it has to move to left completely ( whole median is on left side of the centerline) to cater for left turn. I tried with MedianRaisedWithCrown and MedianRaisedConstantSlope but it did not workout for me.
I used alignment ( for cl ) and offset alignments for median edge and etw. I have problem when the median edge ( offset alignment ) cross the center line and continues. I can see etw and median feature line shifts.
I created a 2d drawing of a river I am building and constructed a centerline. I already have a surface of the existing ground created from which i created an alignment of the centerline and created a profile showing the existing grade along the centerline. Then I created another alignment on the same profile which shows the bottom of my river that I want. I now want to calculate the cut and fill of my project but don't know how. Is there a way I can create a surface of my river from my profile? Or what process do I follow to apply my centerline profile to my 2d river.
View 9 Replies View RelatedI am new to Photoshop (Elements Vers 10).
Today I have been working on a photo (cloning out the background) and after about 4hrs work a thin green line about 1-2 pixel thick, has appeared across the center of the page. How it got there but I can not remove it.
I have tried saving the project (as a photoshop file) and then opening it as a new project in an old version of Photoshop (Vers 3 ?) to see if I could clone out the line, but it will not permit me to clone it.
What the line is, what I did to cause it to appear and how do I get rid of it. I possibly could export the project as a JPG and start as a new project.