We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
I'm trying to make walls that are not just the Standard type (Brick -4 Brick -4 Furring for example) but when I make a wall of this type, it displays as a simple rectangle, instead of with the unique hatch patterns of that wall type...In the properties palette, the wall type is Standard, even though I've chosen a more specific wall type. How do I make walls that aren't Standard?
I am trying to export my floor plan to dwg file and I have curtain wall there which have panels as regular wall types. The problem is that exporting it will put those panels on the wall layer. I need them to be on curtain wall panel layer. I tried to use "Function" parameter in wall family by changing certain wall types to Retaining (since I don't use this parameter) and changed Wall/Retaining category layer to curtain panel in dwg export setup. But it seems it has no effect.I also noticed that walls inserted as panels into curtain wall do have a parameter under "Identity Data" with the name "Categorize as" where are two values - wall or panel. But this does not have any effect either since there is no category for it in export setup.
I have some families in a project such as sinks and cabinets that are wall hosted, but when I try to place them on the existing walls of the linked file they do not go there. Is there a setting to get around this?
I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
I'd like to build a new wall type that displays with a different line weight than is set in the Cut Line Weight for the Wall objects.
I've been using object overrides to do this, but I'd like to have a wall style the pervasively dispays with a different cut weight than the rest of the walls. So it would have a different weight when cut in section as well.
Is there anyway no wall gap line between floor when I copy 1st floor walls to 2nd floor. Not to use "Join geometry" & Line work: invisible line" tools? See attached picture.
Is it possible to have a line weight for the core of the wall that is different from the finish lines ! I mean assigning a different line weight for every component of the wall .
I have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
Looking for how to set line weights differently for different parts of a wall.
I would like for the core wall to be boldest and for all the other finishes and sheathing to be finer and lighter.
Using the Manage>Object Styles didn't do this for me: I am looking for more that just one setting for the entire wall. Someone suggested settings for the materials, but I have not seen any line weight settings for materials.
I have an exterior wall with plaster and lathe on the exterior, and gyp board on the inside. When I edit the wall structure, and modify the layers so that I can take the interior wall finish only up to the sheathing line, the wall does not join at the corners properly. It leaves a gap for the interior fininsh at a corner above the sheathing line when looking in 3d. What are you all doing with parpet walls and the interior finishes above the roof line?
Something has happened and now I cannot select grid lines in curtain walls. I can tab to highlight the grid line (dashed blue line) and click once. This used to make the grid line a more solid blue and witness line dimensions appeared. Now the cursor becomes a "move cursor" (four arrows), the grid line highlight disappears and there are no witness lines.
Nothing is pinned. The vertical grid pattern is not fixed. I've restarted Revit and I still can't select a grid line like before.
This problem started when I tried to change a grid line in a curtain wall that I forgot was part of a group. It let me select the grid line and when I changed the witness line dimension value there was an error message with no information except for entity ID and a cancel button. After that I could no longer select grid lines in this project. If I copy and paste a curtain wall from the project to a default (see attached) I cannot select there either. I can still select grid lines in other older projects, however.
I'm having a bit of trouble using a curtain wall BIM model that I downloaded from a manufacturer's web site.
It seems like the vertical mullions are not centered on the grid lines; one side of the mullion is 1 3/16" from the grid line while the other is 1 13/16" away. If you look at the mullion in plan, you'll see the same issue. If you look at the profile rfa file, it appears that the centerline is properly located and locked, it's just in the project file where it's off.
If I select the mullion in the browser the right-click, Make Element Editable is grayed out.
If I select the mullion in the drawing area, un-pin it and then right-click, Edit Family is grayed out.
If i select the mullion in the drawing area then click Edit Type, the Type Properties dialog box shows the two parameters in the Dimensions group, "Width on side 2" and "Width on side 1", that are uneven by the same amount that the mullion is off of the grid line. I suspect that this the issue, but these are both grayed out and I can't locate their origin. If I duplicate the mullion, those parameters are still grayed out.I can save the profile, but not the mullion, which is showing the issue and contains the parameters that I want to change. How I can select and edit the mullion?
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
I am currently running Revit Architecture 2011. I have interior elevations in my project, which include doors. The door swing lines show up solid in elevation. In fact there actually appear to be two of them. I want the elevation swing indication to be a center line style.
I have changed the swing elevation line type in object types to center (which is what I want).
I go to the elevations and there is no change in the swing indication line except that there still appear to be two lines (one on top of the other) where now one is center linetype and the other is solid. Seems like progress except that there is no actual visual difference.
There is only one symbolic line in the family. If I un-check the draw in foreground box the elevation line disapears entirely when reloaded into the project.
This is an OTB door. I can place it in a completely new template and it displays fine. So it I am thinking it is NOT the family. There must be some setting in the actual file itself controlling this and I am stumped.
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
I cannot seem to find out when and where it's ocuring. I took measurements of a large room and modeled it in Autocad 2014. The solids I used are rather simple, mostly just boxes with some boolean unions and substractions here and there. I then took pictures of every wall, perspective-corrected them, imported each of them to Autocad as material, assigned the real size to the picture material and applied those materials to the corresponding wall faces. Planar mapping proved to be adequate in all cases and mostly mapped correctly on the first go.
The project was completed and saved. To my horror most of the material mappings had just gone the next time I opened the project. It was just as if I had never applied any material mapping or texture to the faces.
After partially appliying the damned material mappings and materials (textures) again I tried to determine under what circumstances the mappings get lost. Its not allways the same walls. The bug seems to occur randomly on various geometry and at various times. Sometimes the mappings get lost after opening the project, sometimes the get lost on the fly when isolating (hiding) geometry. There is no way I can get the room to look as I want it to look as there will allways be some wall that has become default-grey again, randomly (either while working or after opening up the project again).
I really expect Autocad to be rock solid after so many program versions. Did I do something wrong? How would you go about applying textures of inividual walls to wall-faces? Or is Autocad just crap regarding heavy use of textures because that is not the average use-case?
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
I'm at my wits end trying to cut a wall with a void. I want to chamfer the corners of a wall, but I can't get even a basic void to cut from a wall. I get the error : "This Mass has no solid geometry for its Void Forms to cut. They must be deleted, or solid geometry added and cut." They clearly intersect, what am I doing wrong?
