Revit :: Exporting Curtain Wall With Panels As Walls
Feb 16, 2012
I am trying to export my floor plan to dwg file and I have curtain wall there which have panels as regular wall types. The problem is that exporting it will put those panels on the wall layer. I need them to be on curtain wall panel layer. I tried to use "Function" parameter in wall family by changing certain wall types to Retaining (since I don't use this parameter) and changed Wall/Retaining category layer to curtain panel in dwg export setup. But it seems it has no effect.I also noticed that walls inserted as panels into curtain wall do have a parameter under "Identity Data" with the name "Categorize as" where are two values - wall or panel. But this does not have any effect either since there is no category for it in export setup.
View 2 Replies
ADVERTISEMENT
Jan 20, 2014
I'm trying to figure out a small problem I have with creating a Blob-like form. I've created a mass by creating a form out of six (two per level) reference lines. The Form comes out nice, but whenever I divide the form, the two created surfaces don't align with each other. Therefore, when I create curtain walls or patterns on this form, they don't match up either.
I have attached two images and a Conceptual massing file with the mass inside.
View 2 Replies
View Related
May 13, 2008
I've been added and removed specific mullions along curtain wall grid lines and now have the mullions where I want them. Unfortunately, some of the glass panels remain divided along the grid lines even though the mullions have been removed. Is there some way to join the two panels into one?
View 9 Replies
View Related
Dec 6, 2013
How do you create an alternating curtain panel pattern in a hexagon divided surface curtain wall without individually selecting the panels?
I want the "rows" of hexagons to alternate between solid and void.
View 2 Replies
View Related
Aug 13, 2012
I created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.
View 1 Replies
View Related
Dec 4, 2012
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies
View Related
Oct 24, 2013
How would I set up a view filter so only curtain walls are showing. Thew will not show up if walls aren't also checked, but I don't want the walls, just the curtain walls.
View 4 Replies
View Related
Nov 7, 2013
Is it possible to get the room boundary line in a curtain wall to be set to the inner face of the mullion instead of the inner face of the glass?
I have looked at the System family library but cant find a setting for changing this.
Also, setting the location line is greyed out. Why?
If I draw clockwise I get the location line on the inner face of the glass even if the greyed out location line setting in the options bar is set to center.Why?
View 5 Replies
View Related
Feb 11, 2014
I'm trying to get a curtain wall style working, where I would have panels with a clean joint between them, of a controllable size. I'm also working with system curtain wall panels as I expect the CW style will need to work with variable profiles at the top.
My attempt so far has been to do a U-shape profile to get the panels to stop against, but this means the U is seen, particularly at the + junctions of the panels, which is not desirable. I could locally hide the mullions, but this is time consuming and I'd rather do it using a style-based method.
I've also tried doing a filter based on the CW Mullion name, and making it not visible, but this doesn't work for some reason.
View 1 Replies
View Related
Sep 8, 2009
I'm trying to make some curtain walls with spider connectors
(see attachment)...
I've downloaded some families from internet, buy I don't understand how to attach them to the curtain wall.. they appear as cw panels.
View 2 Replies
View Related
May 8, 2008
When I apply a curtain system to a mass, the curtain panels flip inside to outside as shown in the attached image, when applied to a curved mass surface. Additionally, if these systems are applied independently the system justification (beginning and end) is reversed.
View 5 Replies
View Related
May 6, 2013
I am working in Revit 2013 and built the curtain wall on all four side but i am only able to see it in north and south elevation view and not in east and west elevation view.
View 5 Replies
View Related
Sep 9, 2011
How to create curtain wall with Mullion and insert in to project.
View 1 Replies
View Related
Dec 13, 2013
I'm trying to work up a standard curtain wall type for our office, and have hit a snag with a curtain wall panel.
I'm trying to make a panel which will feature a louvre profile, that will sit in the curtain wall opening nice and neat, and array the required height of the panel.
I've made up a generic object, inserted that into a CW panel, then got that into my CW OK, and it flexs fine, but if I try and do an array then it all falls apart?
As far as I've got attached, all I can get to work properly is to have the top and bottom louvre, if I turn this into an array it extends outside the bounds of the CW panels left/right reference plans.
I also have tried to do the array based on a division, e.g. 2000/50 = array number, but to do this I need a height, and when I try and put a height in it becomes overconstrained...
View 6 Replies
View Related
Nov 4, 2005
I'm placing a single glass door in my curtain walls, and they keep coming in upside down, with the door handle 4 feet off the ground. How can I make them right side up?
View 4 Replies
View Related
Oct 20, 2011
Are ther good sources available for learning about modeling curtain walls- complex curtain walls in Revit?
View 1 Replies
View Related
Mar 14, 2012
I created a curved, sloped wall (it's actually a tower) using in place mass, model by face - wall. I need to place reveals in the wall to simulate ACM panels. I've tried using the reveal tool in the wall drop down but it won't allow a reveal to be placed in the custom wall.
View 4 Replies
View Related
Apr 14, 2012
I'd like to select glass in curtain wall to put door in it , but it didn't select .......why? attach Jpg for it
View 5 Replies
View Related
Apr 3, 2013
I am trying to design the border mullion of the curtain wall, in a way that its centerline aligns to the border gridline.
For default the border mullion aligns the external face of it to the gridline, but I would like it to act as the internal mulluon - aligning with the centerline.
View 4 Replies
View Related
Jan 16, 2014
Why would a curtain wall double door be symmetrical in the family editor but asymmetrical (always by 3") in the project.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 1 Replies
View Related
Feb 26, 2011
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies
View Related
Jun 10, 2012
I'm working on a small project: a 2 story single house.
There are some curtain walls in the house. Also, a sliding glass door within the curtain wall. I want the same window schedule covers both the regular fixed windows and curtain walls.
Is it better to convert the curtain walls to regular windows? Or there are other better options?
View 2 Replies
View Related
Feb 9, 2014
I have the general outline and form of my building designed but I'm having problems with patterned curtain walls.
I have created my own Patterned Curtain wall Family and applied it to a conceptual mass, I have not added any parameters as I'm not too familiar with this aspect of Revit. The corners of the building do not align allowing viewing straight into the interior.
I have attached the model in my dropbox so you can fully understand my problem..
Conceptual Mass - [URL]......
Actual Model - [URL]........
Curtain Wall Family - [URL]......
I am also interested in applying glass to some of the hexagon patterns instead of steel to act as windows. At the moment I'm just turning the transparency up on individual patterns .
View 8 Replies
View Related
Oct 6, 2011
I am having a problem with creating a curtain wall system. After selecting my mass surfaces and choosing "create system" I am unable to change the type of curtain wall system. It just comes up with a regular grid system on the mass, where as before I was able to choose triangles, rhomboids etc under the properties tab. Now however I see nothing except for the current curtain system and recently used files.
I have also created a custom panel which I want to insert into my project but am unable to do so? I have tried loading it into the project, however because of the above problem I am not able to change it to my custom panel system.
View 5 Replies
View Related
Feb 5, 2014
I am producing a infill on a shop and I have used curtain walls. See photo below.
I am not sure what would be the best way to do this would you make a mass or in place model.
I am not sure the name of the system but it is like insulation panels or like blinds.
View 1 Replies
View Related
Feb 20, 2013
I'm trying to Array a typical floor for a high rise that I've made a group, but I can't array curtain walls vertically. It's too many floors to do one by one and if I make changes to one floor I'd like them all to change.
View 1 Replies
View Related
Feb 13, 2013
I'm working in Autodesk Revit 2013, just trying to learn whatever I can.
For the life of me, I cannot get the mullions to miter together properly. What I have is a situation (within a sample project from Revit OOTB) where on a curtain wall, the lower horizontal mullion and originating end vertical mullion do miter at their corner. The curtain wall is attached to the floor decks below and above. However, nowhere else will other horizontal and vertical edge mullions on the grid miter together for a smooth junction. I fail to see how Autodesk themselves can get only one corner out of 4 to work properly, and furthermore, let this program out on the market with such a nerve-wracking anomaly within their product.
I've been working on a saved-as copy of one of Autodesk's sample projects. How to get mullions to work properly, consistently?
View 6 Replies
View Related
Jul 10, 2008
I was able to bring in custom curtain wall panels as legend components-- however, when I set the host length, the height is automatically the same. Is there a way to insert a curtain wall panel into a legend that will have a rectangular shape (in my case, taller than it is wide)?
View 1 Replies
View Related
Dec 3, 2013
Something has happened and now I cannot select grid lines in curtain walls. I can tab to highlight the grid line (dashed blue line) and click once. This used to make the grid line a more solid blue and witness line dimensions appeared. Now the cursor becomes a "move cursor" (four arrows), the grid line highlight disappears and there are no witness lines.
Nothing is pinned. The vertical grid pattern is not fixed. I've restarted Revit and I still can't select a grid line like before.
This problem started when I tried to change a grid line in a curtain wall that I forgot was part of a group. It let me select the grid line and when I changed the witness line dimension value there was an error message with no information except for entity ID and a cancel button. After that I could no longer select grid lines in this project. If I copy and paste a curtain wall from the project to a default (see attached) I cannot select there either. I can still select grid lines in other older projects, however.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 8 Replies
View Related
Nov 4, 2011
I'm having a bit of trouble using a curtain wall BIM model that I downloaded from a manufacturer's web site.
It seems like the vertical mullions are not centered on the grid lines; one side of the mullion is 1 3/16" from the grid line while the other is 1 13/16" away. If you look at the mullion in plan, you'll see the same issue. If you look at the profile rfa file, it appears that the centerline is properly located and locked, it's just in the project file where it's off.
If I select the mullion in the browser the right-click, Make Element Editable is grayed out.
If I select the mullion in the drawing area, un-pin it and then right-click, Edit Family is grayed out.
If i select the mullion in the drawing area then click Edit Type, the Type Properties dialog box shows the two parameters in the Dimensions group, "Width on side 2" and "Width on side 1", that are uneven by the same amount that the mullion is off of the grid line. I suspect that this the issue, but these are both grayed out and I can't locate their origin. If I duplicate the mullion, those parameters are still grayed out.I can save the profile, but not the mullion, which is showing the issue and contains the parameters that I want to change. How I can select and edit the mullion?
View 2 Replies
View Related
Nov 12, 2012
I have a curtain wall profile loaded into a project. When I change the panel in a CW to the profile that I loaded, the new panel is 5/8" short on both sides. As you can see in the attached image, on the left side of the plan view, the panel is 5/8" short of the cw grid line - there is no mullion there. On the right side, the panel is 5/8" short of where the mullion crosses the reference plane in the mullion .rfa file. The system panels on either side terminate correctly.
This isn't specific to any project; it works (or doesn't work) in any file. There are no horizontal mullions in the file shown. How to get the profile to extend properly?
View 2 Replies
View Related
