I have some families in a project such as sinks and cabinets that are wall hosted, but when I try to place them on the existing walls of the linked file they do not go there. Is there a setting to get around this?
View 1 RepliesIn a project I'm working on we have some doors in large accordian room partitions that need to appear in the schedule however they will not be hosted in a wall in our model. The walls are 2d in the CAD background from a consultant. I created a door family that can be placed and scheduled however the "Room #" field does not populate. Is there a way to add that to the family? I believe the issue comes up because the doors are not in a wall that is "Room Bounding" or in a wall at all.
View 9 Replies View RelatedHow do you assign an exisiting stairs to be the host of a new set of railing?
View 1 Replies View RelatedI'm trying to work out how to modify an existing, out of the box Revit family, a window, to create a new one, and struggling with it.
What I'm looking to do is to take the family (from the metric uk template) "Windows_Sgl_Horz_Bars.rfa" and add a second window bar in. What I'm finding is I can copy the window bar extrusion easily enough, but getting it to constrain to the sides of the window frame as the middle one has been done (position not changed from the original) , it doesn't work, when I flex the model I keep getting "constraints are not satisfied" warnings.
When I move the copied extrusion to the sides it looks like it is snapping to the constrain line of the pre-existing window pane, I don't understand why the new alignment with an existing one doesn't work.
I had been looking to generate a lot of new family content by modifying what has come out of the box, if I can't fathom it, its going to be a lot of work.
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I want to break the wall at intersection point of another wall using Revit API's.
For instance , In screen shot attached :
We r used to have a center line for each separate wall not just for dimension or placing but even visible after plotting and in each view including section , whether it is a structural or partition wall or ... etc , I am new to revit and i fell in love with the software right away, how to display wall center line in views , the only way i found out how to do it is either by drawing model lines or grid lines which will be so dreadful and time consuming if u have 1250 walls in the project . doing it automatically perhaps to be a part of the wall proprieties
View 3 Replies View RelatedI am trying to export my floor plan to dwg file and I have curtain wall there which have panels as regular wall types. The problem is that exporting it will put those panels on the wall layer. I need them to be on curtain wall panel layer. I tried to use "Function" parameter in wall family by changing certain wall types to Retaining (since I don't use this parameter) and changed Wall/Retaining category layer to curtain panel in dwg export setup. But it seems it has no effect.I also noticed that walls inserted as panels into curtain wall do have a parameter under "Identity Data" with the name "Categorize as" where are two values - wall or panel. But this does not have any effect either since there is no category for it in export setup.
View 2 Replies View Relatedwhy my existing walls show up fine in my sheet but don't plot to .pdf. I have the view range settings set correctly and all other sheets plot fine.
I thought maybe the roof transparency was the issue but Revit is usually pretty much a WYSIWYG plotting operation and the walls are displaying in the sheet file. Haven't tried plotting to a plotter but it doesn't matter. I need to plot .pdf's.
I have a problem with the connection between an existing and new walls in revit, I attached a screen shot. I tried the wall join button , but I'm still unable to make the connection look right.
View 3 Replies View RelatedI would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View RelatedThe bread shaped object is a structural concrete column with two corners rounded.
Why can I see the new wall's lines ghosted through a structural column?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Is there a way to demolish (new construction) an opening into a wall that is an existing phase (existing wall)?
View 6 Replies View RelatedI have drawn an existing building thats needs a renovation. In the project i need to add 100mm insulation to the external side of the outer walls. Are there any way that i can add theese 100mm to my existing walls but only show the new 100mm in new construction ?
View 1 Replies View RelatedI just upgraded the server for our small firm to OS X Lion. The share is accessible from Windows and all permissions are the same as they were before the upgrade. I can manipulate and open files in other programs in Windows, but everytime I try to open a .rvt or .rfa file in Revit from the server I get "Failed to open document". I can open .dwg files fine in Autocad, and I can even insert .dwg and images from the server into an open revit file.
See specs below:
RAC 2011
File Server: Mac Pro running OS X 10.7.1
Windows 7 running in Parallels desktop
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedIs it possible to host an adaptive point along the intersection of two reference planes? Or is there another way to accomplish this same idea?
View 5 Replies View RelatedI created a keyplan as a generic annotation family, with masked regions representing the various segments of the building. For some reason, my palette of hatches within this family template is very limited, and I cannot choose a dotted pattern for the masked regions, which is an informal company standard.
From what I've seen, adding new hatches is a cumbersome process. Since a simple dot pattern is available in project files though, is there a simple way to add that hatch to this family file?
I am trying to take a countertop that I have in this bathroom remodel floor plan and place it onto a separate sheet so that I can send it out for pricing. I created a new sheet "countertop details" However, it is not letting me add it - I keep getting this warning "Can't create this kind of element in this view in the current mode." I know the answer is in one of the parameters but I am still trying to get used to this program and teaching myself.
View 3 Replies View RelatedAre there any known methods (work-arounds or otherwise) for linking cad files in families?
View 1 Replies View RelatedI have a pile family where i have created a Shared Text parameter under Identity data called Vert Load. I have nested this into a pile cap family in several locations and have the same Shared Text parameter. If i select the pile in the pile cap family i have the option to put a value in the properties dialogue box under Vert Load. The pile cap family is now loaded into my project and the parameters shared in the project. When i select the Pile cap in my project then i have the option to add a value for the Vert Load but in this pile cap i have 3 piles and i want to give different values for each. When i select an individual pile within the Pile cap family then the Vert Load value is greyed out.
I want these vert Loads to appear in a schedule... I've attached a couple of images.
I am doing a window nested family with two windows that have three voids to perform the wrapping of the stucco layer and the gypsum layer independently, but in the nested family I get a wall sleeve between both windows. I have used voids with parameters in the nested family, but when inserted in the projects the voids don't cut anything. See the images.
View 9 Replies View RelatedIf i delete a family from the project browser, under families expanded folder group, will this delete them from the project and reduce the file size?
Best way to delete just unwanted families that have been loaded into the model?
I know of purging the model but i believe this will potentially delete tags i may want and other information that just not being utilized at the time of purge.
I recently got revit 2012. It installed fine, however I see no templates or revit family in the following folder
C:ProgramDataAutodeskRAC 2012
How should I get the families and templates for revit?
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedI'm trying to make walls that are not just the Standard type (Brick -4 Brick -4 Furring for example) but when I make a wall of this type, it displays as a simple rectangle, instead of with the unique hatch patterns of that wall type...In the properties palette, the wall type is Standard, even though I've chosen a more specific wall type. How do I make walls that aren't Standard?
View 1 Replies View RelatedI am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
What determines the default elevation when inserting familes? I have a wall hosted family that always defaults to 4'-0". I have tried setting the default elevation in the family but it always defaults back to 4'. I have this issue with other familes as well.
I know I can set the elevation when I insert it but having to so that every time seems pointless when the elevation will never change for a family.
Windows 7
RAC2012
I'm a new Revit user and can't seem to get the hang of fill patterns.If I go to Manage>Additional Settings>Fill Patterns Ise a list of a couple of dozen or so fill patterns with the Drafting Button selected.
But when I try to modify the fill region in a family I'm only given a choice of about six of the patterns.how to "load" the other pattern types.