Revit :: Adding Wall Sweeps To Wall Profile?

Jul 29, 2011

I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel  profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.

View 8 Replies


ADVERTISEMENT

Revit :: Can't Update Wall Profile With Sweeps On Both Side

May 30, 2013

I'm, trying to update my wall profile so that all of my interior walls have baseboard/molding on them.  I've been successful in creating a wall profile with molding, but only on one side.  Looks like this in plan view. (Molding is highlighted and only on one side.)So, I first try to update my wall profile like this:

And I either duplicate, or add another sweep to the wall, and make that "Exterior" as to be on the "other" side of the wall.However, after pressing "OK" and "OK" at the wall profile editing box, I get the following error box:

When I click on "Show", I'm shown nothing.  When I click on "Enjoin Elements", this same box comes up no matter how many times I click on the "Enjoin Elements" button. 
 
Having problems adding molding to both sides of their interior walls?  Am I going about this the right way? Tried to smallify the actual .rvt file, but I can't get it down to an acceptable size for posting here.

View 6 Replies View Related

Revit :: How To Create Cornice Using Wall Sweeps

Sep 1, 2011

I am trying to create a cornice using a wall sweep.  I created the profile I need but when I load the profile and try to add the sweep to the wall Revit shuts down completely. 

View 1 Replies View Related

Revit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed

Apr 12, 2012

Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed.  For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet.  How do i get my wall cap to follow along?  I thought splitting it and changing it's height would work, but no.  And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.

View 3 Replies View Related

Revit :: Bulkhead Wall Join Skews Bottom Of Existing Wall

Jul 25, 2013

I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling.  This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level.  I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite.  I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined.  I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
 
Surely there's a way to have different kinds of joins at different heights?

View 9 Replies View Related

Revit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall

Dec 4, 2012

I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core).  I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?

View 2 Replies View Related

Revit :: How To Cut Red Part Of Wall 1 / Hole In Wall 2 By Blue Rectangle

Nov 27, 2011

Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
 
I also want to add  a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.

View 1 Replies View Related

Revit :: Changing Length Of A Wall And Wall Type?

Oct 31, 2013

When I try to change the length of a wall it grows at both end.  How to grow at one end only?
 
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves.  eg: change from 130mm to 250mm screws up my room width.  How do I do this?

View 1 Replies View Related

Revit :: Arched Hole In Wall And Wall Height

Apr 16, 2013

I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
 
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
 
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.

View 3 Replies View Related

Revit :: Cannot Modify Wall Profile

Dec 7, 2011

I am trying to modify a vertical structural wall in elevation view - change from rectangular shape to trapezoidal (to allow a flat roof to drain to east).  Did south wall in one elevation; I chose the wall, and it was outlined in red.  I was then able to drag the east vertical edge down by a foot, creating desired slope. I now go to another elevation to modify north wall the same way, but when I choose the wall, it comes up with a blue ball in the center of each edge, with little hash marks on either side, and won't let me modify anything. Also, when I choose the wall outline (with the blue balls), I can't get to wall properties.

View 2 Replies View Related

Revit :: Adding Wall Top And Bottom Plates?

Sep 9, 2011

Does Revit 2011 have and means of duplicating a wall then modifying it to include top and bottom plates - or does a wood stud wall with plates already exist in some available library?

View 9 Replies View Related

Revit :: Edit Profile On Curved Wall Is Still Not Possible?

Apr 14, 2011

For a very long time I have missed to able to edit profile on a curved wall. It seems so basic and yet it has not been possible. So I was very pleased when it was pronounced that this basic option was finally possible in Revit 2012. Alas it is not. I am so very dissapointed because this is a basic feature wich should have been fixed years ago.
 
Any simple method to edit profile on a curved wall without having to attach wall top and buttom to invisible layers of floors and roofs ect.

View 3 Replies View Related

Revit :: Editing Profile Of Curved Wall?

Jul 2, 2008

i drew a curved wall. now when i select it revit doesn't give me the option of an edit profile button as it would with a rectangular/straight.

View 6 Replies View Related

Revit :: Drag Wall End To Edge Of Wall

Apr 7, 2013

“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!

How this temporary dimension can be dragged to the edge of the wall?

View 3 Replies View Related

Revit :: Create A Wall The Has Profile (in Plan View)

Nov 22, 2012

I need to create a wall the has a profile (in plan view).

View 1 Replies View Related

Revit :: Adding And Removing Wall Thickness In Existing And New Construction?

Aug 21, 2012

I have drawn an existing building thats needs a renovation. In the project i need to add 100mm insulation to the external side of the outer walls. Are there any way that i can add theese 100mm to my existing walls but only show the new 100mm  in new construction ? 

View 1 Replies View Related

Revit :: Make Sweep Adjust To Profile Of Wall Automatically?

Dec 19, 2012

I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?

View 2 Replies View Related

Revit :: Creating Tiled Skirt - Wall Sweep Profile

Jul 22, 2013

I'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile. 
 
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.

View 1 Replies View Related

Revit :: Adding Stiles And Rails To Curtain Wall Glass Door

Oct 12, 2012

The only door I can find to insert into a glass curtain wall is a simple glass single door with a handle. I know this is a very particular thing and any door won't work.  My door needs to have stiles and rails like most doors in storefronts or curtain walls.  How do I create a type with these features?  Do I need to create a family from scratch?

View 1 Replies View Related

AutoCAD Architecture :: Raised Decking Profile / Create A Profile / Wall Style

Oct 9, 2011

I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Construct Wall Centerline In The Middle Of Wall?

Sep 13, 2013

i need a lisp that construct line between two lines of wall by selection called  (Wall Centerline)

i attach example of what i want assuming that i will often isolate wall layer in the project to facilitate the task.

View 3 Replies View Related

AutoCAD Architecture :: Make Cylinder Wall Or Closed Curved Wall?

Jun 3, 2013

I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.

View 4 Replies View Related

AutoCAD Civil 3D :: 2012 Retaining Wall Assembly And Wall Height?

Jul 23, 2012

I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly.  My cut slope parameter is set to hold at 1.5:1.  I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly.  Problem, I am not able to use a target other than a surface for daylighting.  I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point. 

View 2 Replies View Related

AutoCAD Architecture :: Wall Style Creation (Window To Cut Only One Portion Of Wall)

Dec 7, 2011

I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer.  What I would like to do is have this wall react a certain way when I insert a window.  Basically, I don't want the window to cut into the brick veneer, only the framing.

I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.

View 1 Replies View Related

AutoCAD Architecture :: Wall Intersection Clean Up For Different Wall Types

Jun 12, 2012

I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.

View 9 Replies View Related

AutoCAD Architecture :: Convert Curtain Wall To A Wall?

Apr 14, 2011

I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?

I simply want to convert an existing curtain wall to another wall type how is that done/

View 1 Replies View Related

3ds Max Modeling :: Create A Gap In Wall Profile

Feb 11, 2013

Is there anyway to create a gap in AEC extended wall in 3ds max. I know to create a gap while using doors and windows. But I wish to create a gap without any doors or windows. I do not want to use proboolean also, because I need the properties of Walls too.

Is there any modifier to create proboolean? Can we create a curved wall using AEC extended wall?

View 1 Replies View Related

Revit :: No Wall Gap Line?

Apr 4, 2013

Is there anyway no wall gap line between floor when I copy 1st floor walls  to 2nd floor. Not to use "Join geometry" & Line work: invisible line" tools? See attached picture.

View 3 Replies View Related

Revit :: Why Can't See Wall Sconces

Dec 12, 2013

Short story is I made a wall sconce from scratch but I can't see the symbolic lines in my ceiling plan in the project.
 
I needed a linear wall sconce for a client presentation based on one of theirs already installed.  The manufacturer doesn't provide BIM for this model so I had make my own.  I haven't bothered with photometrics.  At this point all I need is a placeholder for the ceiling plan and a 3D model for a hidden line view. I used the wall based light fixture family.  There was a plane elevation but no apparent parameter so created one and called it 'mounting height'.  After about ten minutes of modeling (and over an hour of tedious aligning, dimensioning and locking of the sketches to keep the model from distorting with changes in wall thickness) I opened the ceiling reference level plan and drew some symbolic lines to represent the fixture on the ceiling plan in my project.
 
Here's what happened.
 
The symbolic lines for the CPRL (Ceiling plan in the family editor) are also visible in the FPRL.  I don't know why this is and there doesn't appear to be a way to hide them in just one plan.  I suspect it's because both are at the same height (the reference level.)  I tried changing the working plane before drawing the symbol lines to another plane above the reference level and out of its view range but it had no effect.  I can still see them in the floor plan.When I loaded it into the project nothing appeared and I got the message about 'no elements are visible because yada yada'.  The symbolic lines didn't show up at all.  I checked the detail level and that wasn't it.  As far as I can tell the view range for the CPRL and the RCP in my project are the same.  They don't show up in the project floor plan either.  The sconce is visible in 3D views so it's definitely in there.  I tried monkeying with the height of the symbolic lines like I stated in part 1. but it had no effect on there visibility.  Symbol lines are visible in other families so it can't be an issue with visibility overides.In my project I noticed there's a parameter for the fixture called 'Elevation'.  Changing it moved the fixture up and down on the wall.  Changing the 'mounting height' parameter in the project had no effect!  This parameter worked fine in the family editor.  Playing with the 'Elevation' parameter and the cut plane elevation brought the symbolic lines into view.  Apparently the symbolic lines are only visible when the cut line is passing through the sconce.  Unfortunately my sconce needs to be mounted at 6 ft and my cut plane is at 7'2 to avoid cutting doors and windows.   How do get these symbolic lines to display?
 
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013

View 3 Replies View Related

Revit :: Turn Off A Certain Wall?

Jun 8, 2012

I want to turn off a metal stud wall but leave visible the pre-cast wall.

View 5 Replies View Related

Revit :: Getting A Subcategory For Wall

Nov 20, 2006

revit should give a sub category for wall so it easy to on and off using visibility and give different line color in the object style

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved