I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 RepliesAny way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedI'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
I need to make a sweep along the edge of the wall opening shown in the project, but Revit does not allow me to do it.
View 9 Replies View RelatedI have applied a material to a wall sweep, but whenever the sweep turns a corner the material flips upside down.Note that the frieze is supposed to be on top.
View 3 Replies View RelatedRevit 2013 does not have the Wall Sweep panel available from a 3D view.
How do I go about modifying segments?
Specifically, how do I modify the sweep so it wraps both sides and end of the wall?
I have a wall type that has an embeded sweep for the wall base. My project is set up in two phases, existing and new work. A door has been created in the existing phase, and demoed in the new phase. Where the door has been demolished an infill with the base appears, great! In the new phase I inserted a larger door that cuts the existing walland the entire infiil from the demolished door, but the base still remains. How do I get the new door to cut the base that was created as a result of the infill?
View 1 Replies View RelatedI have tried 2 methods of generating a parapet cap:
1 - Creating a wall style with the sweep.
2 - Added a host sweep.
The problem is that using either method or a combination of both methods doesn't always work. I still end up with some caps that don't miter correctly even after editing. Sometimes, different intersections will miter and others won't.
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View RelatedI making a glass panel with a metal trim for a bank window teller family. How do I control the lineweights for the metal profile?
It seems by default wide lines are being used. I don't see an option in the family editor to pick thin lines.
While working in the conceptual mass environment, I have inserted a closed profile (1 polyline) from a dwg file.
What I need is to either extrude or sweep this profile as a surface, but obviously Create Form only gives me the solid option.
How do I go about doing this?
Can sweep profile cut up to the bottom of stair stringer?
Find attached.
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
View 3 Replies View RelatedI have to use concrete hollow core slab in my project, but I was wondering, if it is possible that the hollow core slab automatically adjust itself to the width of the room. I have attached a screen-shot of the problem, where the the last hollow core slab overlap the beam. I can manually change the width of the last beam, but it would take a lot time, moreover if I change the dimension of the overlapped beam, then i have to readjust the last hollow core slab.
View 1 Replies View RelatedI am trying to modify a vertical structural wall in elevation view - change from rectangular shape to trapezoidal (to allow a flat roof to drain to east). Did south wall in one elevation; I chose the wall, and it was outlined in red. I was then able to drag the east vertical edge down by a foot, creating desired slope. I now go to another elevation to modify north wall the same way, but when I choose the wall, it comes up with a blue ball in the center of each edge, with little hash marks on either side, and won't let me modify anything. Also, when I choose the wall outline (with the blue balls), I can't get to wall properties.
View 2 Replies View RelatedFor a very long time I have missed to able to edit profile on a curved wall. It seems so basic and yet it has not been possible. So I was very pleased when it was pronounced that this basic option was finally possible in Revit 2012. Alas it is not. I am so very dissapointed because this is a basic feature wich should have been fixed years ago.
Any simple method to edit profile on a curved wall without having to attach wall top and buttom to invisible layers of floors and roofs ect.
i drew a curved wall. now when i select it revit doesn't give me the option of an edit profile button as it would with a rectangular/straight.
View 6 Replies View RelatedI need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedI'm, trying to update my wall profile so that all of my interior walls have baseboard/molding on them. I've been successful in creating a wall profile with molding, but only on one side. Looks like this in plan view. (Molding is highlighted and only on one side.)So, I first try to update my wall profile like this:
And I either duplicate, or add another sweep to the wall, and make that "Exterior" as to be on the "other" side of the wall.However, after pressing "OK" and "OK" at the wall profile editing box, I get the following error box:
When I click on "Show", I'm shown nothing. When I click on "Enjoin Elements", this same box comes up no matter how many times I click on the "Enjoin Elements" button.
Having problems adding molding to both sides of their interior walls? Am I going about this the right way? Tried to smallify the actual .rvt file, but I can't get it down to an acceptable size for posting here.
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View Relatedgetting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedHow to show the level of cut on the profile as reference line automatically?
I’m wondering if there is a way to show the level of cut automatically on the elevation view.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How do you make a wall that's not rectanglar (in plan view)?
See attached image.
The brown color at the end of the wall indicates the polygonal shape which should be part of the wall.
I am trying to get my drawings into revit but I am stuck on getting the basic form of the building in Revit.
Since I am using slanted walls I need to work with a Mass but I can't get the mass look like my idea. The picture I attached is a simple screen capture of Rhino with the outline of the building.
How im going to make it just a single vertical frame in 45 degrees wall?
View 3 Replies View RelatedI have a wall tool whose style has a sweep attached, when I added the tool to the palette it drops the sweep. I know this was a wish list item a few years back. Has the feature been added that allows me to add the sweep to the tool so I dont have to manually import and add the sweep in every drawing?
View 2 Replies View RelatedI want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedI have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View Related