Revit :: Make A Sweep Along Edge Of Wall Opening Shown In Project
Jul 12, 2013I need to make a sweep along the edge of the wall opening shown in the project, but Revit does not allow me to do it.
View 9 Replies
ADVERTISEMENT
Revit :: Wall Sweep At Infill Is Not Cut By New Opening
Jul 3, 2013I have a wall type that has an embeded sweep for the wall base. My project is set up in two phases, existing and new work. A door has been created in the existing phase, and demoed in the new phase. Where the door has been demolished an infill with the base appears, great! In the new phase I inserted a larger door that cuts the existing walland the entire infiil from the demolished door, but the base still remains. How do I get the new door to cut the base that was created as a result of the infill?
View 1 Replies View RelatedRevit :: Make Sweep Adjust To Profile Of Wall Automatically?
Dec 19, 2012I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 Replies View RelatedRevit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedRevit :: How To Make Rounded Edge Wall And Roof
Sep 27, 2012I am trying to get my drawings into revit but I am stuck on getting the basic form of the building in Revit.
Since I am using slanted walls I need to work with a Mass but I can't get the mass look like my idea. The picture I attached is a simple screen capture of Rhino with the outline of the building.
Revit :: Wall Sweep Material
Nov 13, 2012I have applied a material to a wall sweep, but whenever the sweep turns a corner the material flips upside down.Note that the frieze is supposed to be on top.
View 3 Replies View RelatedRevit :: Wall Sweep Modification In 3D View?
Dec 21, 2012Revit 2013 does not have the Wall Sweep panel available from a 3D view.
How do I go about modifying segments?
Specifically, how do I modify the sweep so it wraps both sides and end of the wall?
Revit :: Creating A Wall Style With Sweep
Feb 13, 2006I have tried 2 methods of generating a parapet cap:
1 - Creating a wall style with the sweep.
2 - Added a host sweep.
The problem is that using either method or a combination of both methods doesn't always work. I still end up with some caps that don't miter correctly even after editing. Sometimes, different intersections will miter and others won't.
Revit :: Creating Tiled Skirt - Wall Sweep Profile
Jul 22, 2013I'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
Revit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall
Dec 4, 2012I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRevit :: Drag Wall End To Edge Of Wall
Apr 7, 2013“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
Revit :: Curtain Wall Door Asymmetrical In Project
Jan 16, 2014Why would a curtain wall double door be symmetrical in the family editor but asymmetrical (always by 3") in the project.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Revit :: Foundation Not Visible Under Curtain Wall In Project
Feb 26, 2011I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies View RelatedEdge Animate CC :: Workspace Is Blank When Opening A Project?
Nov 25, 2013I'm trying to work on a project I created a few months ago in Edge. However, when I try to open it in Edge Animate CC, it just displays a blank screen (See image).
The timeline, the canvas, the properties, nothing seems to be populated. If I drag the time line back to 0:00, an alert pops up saying "An error occured. Please save your work and restart Edge Animate." The exported HTML file still seems to work fine though. I've tried uninstalling and reinstalling Edge, but that hasn't seemed to work.
EDIT: This seems to be an intermittant problem. Sometimes, the file displays correctly, sometimes it doesn't. If I close the program and open it again, the issue re-occurs.
Revit :: Non Room Bounding Wall Opening?
Jan 28, 2013I have a load-bearing masonry wall in an existing building where I need to remove a portion of it to make two rooms into one. The wall will only be removed so that it is above the new ceiling. How do a create an opening in it that is not room bounding? I have a wall opening family, but you cannot choose whether or not they are room bounding. This only works for walls.
View 7 Replies View RelatedRevit :: 2014 - Insert Arch Opening In A Wall
May 28, 2013I need to insert a arch opening in a a wall. I dont have a opening folder under my door family. I tried to download openings from revit city but although i save it in my sampels file is is just not there.
View 2 Replies View RelatedRevit :: Standard Opening In Wall That Is Modeled In Place
Feb 25, 2014Is it possible to add a standard wall opening in a wall that i have modelled in place?
I know i can add a void extrusion to the model just wondering if there's a setting i can change to allow me to use the standard wall opening comand.
Revit :: How To Get Horizontal Sweep To Miter With Vertical Sweep
Jan 29, 2014Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View RelatedRevit :: Getting Horizontal Sweep To Miter With Vertical Sweep?
Feb 22, 2013getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedRevit :: How To Demolish (new Construction) Opening Into Wall (existing Phase)?
Mar 18, 2011Is there a way to demolish (new construction) an opening into a wall that is an existing phase (existing wall)?
View 6 Replies View RelatedRevit :: Brick Coursing Changing To Vertical At Wall Opening?
Nov 18, 2012At Home>Opening tab>Wall in Revit 2012 I cut an opening in a brick rainscreen wall and the brick coursing turned vertical at the wraps.
View 1 Replies View RelatedRevit :: Door Cutting Out Plaster Wall Wrap Element At Opening
Oct 4, 2013Is the attached possible? I'm trying to cut out the plaster wrap to a wall, but can't figure out how to do it.
I've had a look at using reference planes in the door family object, but they don't seem to be able to do this?
Simply checking the wall type to wrap at only the external insert isn't going to work as I want the recess in the plaster to be away from the door frame edge.
Revit :: Opening Project File In 2012?
Aug 11, 2011Often as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
Edge Animate CC :: Make Project Fit All Screens?
Nov 7, 2013I'm having trouble making my project fit all screens.
This is my project link: [URL]
I've made this project 7000px wide - scrollable horizontal - with a fixed object (the shopping cart) to make it feel like you are pushing the cart along the street. I then set height to about 1200 px, to prevent the bottom of the screen to go white.
I want this project to look good on mobile, iPad, laptop and PC/Mac - both orientations.
I thought I was in the clear with theese settings, but checking it on a small screen (laptop), the bottom of the stage fell out of the screen. And we can't have that...
I tried setting the height to 100%, tried having a smaller height (800px) and setting the background color to green, tried hiding and showing the overflow, but I can't seem to hit the perfect settings for this to work.
My inspiration comes from this project:[URL] Now, this works - as far as I can see - on all screens, both orientations.
AutoCad 3D :: Gear Tooth Profile - Sweep Along Lines Shown
Jan 28, 2013The attached file shows a gear tooth profile that I need to sweep along the lines shown. The problem is those lines are not all parallel to the UCS The tooth profile is a region.
Is there a workaround to make this happen? I used to do this all the time in 2008.
I couldn't attach the file 'cause it wss too big so I saved it as a PDF but now I can't attach that because it is not a DWG
How do I attach a PDF?
Revit :: How To Make Wall Not Rectangular (in Plan View)
Aug 20, 2013How do you make a wall that's not rectanglar (in plan view)?
See attached image.
The brown color at the end of the wall indicates the polygonal shape which should be part of the wall.
Revit :: Make It Just Single Vertical Frame In 45 Degrees Wall?
Aug 19, 2013How im going to make it just a single vertical frame in 45 degrees wall?
View 3 Replies View RelatedAutoCAD Architecture :: Wall Tool - Style With Sweep Attached?
Mar 24, 2012I have a wall tool whose style has a sweep attached, when I added the tool to the palette it drops the sweep. I know this was a wish list item a few years back. Has the feature been added that allows me to add the sweep to the tool so I dont have to manually import and add the sweep in every drawing?
View 2 Replies View RelatedRevit :: Make Project Standards Editable While Work Sharing?
Feb 13, 2011I am project coordinator on a work sharing project. As such I am responsible for family creation and Project Standards and need to have these items editable. I can select them all and make them editable but they always get changed back to none editable? How do I check these out until I relinquish them?
View 3 Replies View RelatedRevit :: Make Two Pads Share Curved Edge?
Apr 16, 2008I'm trying to make two pads share a curved edge but they just dont seem to be able to do so. I have to leave a gap between the two pads. If i snap the edge together, while the computer regenerates an error pops up saying pads can share edges but cannot overlap. Whats the deal yo?
View 5 Replies View RelatedRevit :: Bulkhead Wall Join Skews Bottom Of Existing Wall
Jul 25, 2013I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
