Revit :: How Hollow Core Slab Automatically Adjust To Width Of Room
May 7, 2013
I have to use concrete hollow core slab in my project, but I was wondering, if it is possible that the hollow core slab automatically adjust itself to the width of the room. I have attached a screen-shot of the problem, where the the last hollow core slab overlap the beam. I can manually change the width of the last beam, but it would take a lot time, moreover if I change the dimension of the overlapped beam, then i have to readjust the last hollow core slab.
View 1 Replies
ADVERTISEMENT
Dec 19, 2012
I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 Replies
View Related
Aug 30, 2012
I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies
View Related
Jan 15, 2013
I originally created a slab with the full version of Autodesk Revit 2013 with POINTS to create a slope to the slab. There does not seem to be a way to edit those points with Autodesk Revit LT. There appears to be an alternate method in the LT version to create slopes utilizing slope arrows. So is SLOPE EDITING no longer a feature with LT?
View 2 Replies
View Related
Aug 19, 2013
I have been a VS user for a long time now. I am currently using VSPro X5. I have an Intel Core i7-3770K overclocked to about 4.3GHz. I am running a little tuning utility program by intel to validate that when using VSPro X5 it is indeed utilizing only 1 core and about 19% of the CPU. This is irregardless of whether or not I am editing or encoding video. I have selected all of the hardware acceleration options and optimizations to no effect.
I also use MainConcept's encoder to render certain video and have validated that all 4 cores are engaged during the process and about 65% of the CPU is utilized.
I downloaded and installed the trial version of X6 and ran it and used it to process video with the same results as X5.
I am running 64 Bit Win7 Ult.
For the sake of comparisons, an AVI file converted to MPG (720x480, 1500kbps) is converted by: MainConcept at about 200fps VSPro X5 at about 30fps
View 2 Replies
View Related
Jul 14, 2008
I am thinking of upgrading my PC, but only if the dual-core and quad-core machines will run Photoshop and Lightroom faster than a single core machine (which I have now). Does anyone know if Adobe has upgraded their software (CS3 and Lightroom) to take advantage of the multi-threading that's possible with multi-core PCs?
View 6 Replies
View Related
May 16, 2013
Is it possible to have a line weight for the core of the wall that is different from the finish lines ! I mean assigning a different line weight for every component of the wall .
View 4 Replies
View Related
May 20, 2013
I am working on the project with sloping roof. I have drawn beams with slope. however when I am drawing slab with slopes I am not getting this slopes. There is gap between the beams and slab. I have attached screen shot for more information. Also I need to apply loads for this sloped roof.
View 4 Replies
View Related
Oct 25, 2012
I've had a request from on of our users to replicate something that has been done for years in 2D CAD. They want a marker to show changes in floor levels that look something like this:-
The annotation needs to be able to read the slab on either side of the step marker and hopefully if possible the difference be represented as text. The datum levels are secondary and it is really the depth of the step that seems to be more important. I do however want to avoid these being just dumb text as if/when the design evolves someone will forget to modify the text.
Here is an example of a few showing two steps in the slab and the results we would want.
I have tried loading/nesting a standard spot level in thinking if I had two in an annotation that this might work, but I was unable to even place a spot marker within the family which makes some sense I suppose.
Is this even technically possible...? I realize the origin usually determines what hosts the family and how, but I guess we are looking for something with a double origin, which is why I think this may not be possible...?
View 3 Replies
View Related
Apr 1, 2013
I am looking to create an irregular concrete slab, with barrel vaulted ceilings on a small radial section of a circular slab, and a a parabolically curved upper section to the slab, and a large punched hole in the middle of the slab. To this point, I have been able to achieve this using multiple components and masses, but I was wondering if there was a way to make a single object with a single solid material that may be able to achieve the same effect. I have attached a section for ease of explanation.
View 8 Replies
View Related
Feb 21, 2014
I need to snap witness lines to the core face (face of stud) and not the center of the wall or the face of sheet rock.
View 6 Replies
View Related
Sep 23, 2013
Is it possible to design a wall where the core boundary lines fall in the middle of a wall layer?
Case in point is a complex wall with an 8" foundation wall that follows a building line along its exterior face. Above that is 3'-6" of stone veneer/airspace/sheathing/6" stud/drywall. Above that is EIFS/sheathing/6" stud/drywall.
The design calls for an insulation gap between the slab and the foundation and for the top of the wall to be 6" above the first floor level. The 6" metal stud thus overhangs the top of the foundation wall by 1" on the interior side.
Ideally the floor would be flush and core would simply follow the studs but the building lines (controlled by the grid) control the placement of the foundation wall and no part of the upper wall lines up with the foundation wall. Even worse the exterior finish falls 1/2" inside the exterior of the wall below and there should be no line drawn there.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Aug 18, 2011
I have created several stacked walls in my model and I am to the point of dimesioning my walls. I am wanting to dimension to the centerline (core) of walls; however, when I try to dimension a stacked wall it won't give me the choice to dimension to the core centerline.
View 1 Replies
View Related
Mar 28, 2013
I was having trouble with the edit sketch options coming up when I initiated a command that needed it. I upgraded to Update 2 and It seemed to fix it. But now it's happening when when I select a floor. I'm not getting the option to edit the floor. The context options don't match what I have selected. What is the problem and how can I fix this?
View 1 Replies
View Related
Feb 20, 2013
I ran into a problem when trying to create a new floor slab for a basement project.
Rivet stops working and shuts down after I try and load "sand" into the material column. The same thing happens when I tried to load "gravel". Interestingly enough, "Earth" can be loaded with no problems.
View 9 Replies
View Related
Aug 29, 2012
Is there a quick way of profiling topography under a undulating concrete floor slab? In other words so that the topography follows the underside surface of the slab. I know this is possible by adjusting each point on the topo surface but is there a quicker way?
View 1 Replies
View Related
Jun 11, 2012
Our model uses several material types for insulation, mostly rigid variations at this point. The various materials are used in floor, wall and roof systems. Is there a way to create a single schedule that would list insulation quantities across all three system types?
View 2 Replies
View Related
Mar 12, 2013
We are looking for a way to document the free height, between two floor slab on two different levels, on our floorplans. We would like to use some sort of tag. And not just text.
View 9 Replies
View Related
Dec 13, 2013
illustrator cs4. when press on drawing or text, it cannot be adjust on it width or height by mouse! Photo 1 cannot adjust. Photo 2 (sample) can adjust
View 4 Replies
View Related
Jun 25, 2013
Is there any way to adjust width of attribute text so that it is not out of contained block. The attribute is set at left alignment and width factor <=1.
View 2 Replies
View Related
Mar 29, 2012
Gimp 2.7 now offers the ability to add crop marks to print outs.
However, where can I find the setting for how far they should appear from the picture's edge. I want to adjust the width of the bleed, which is 0 (zero) at the moment (which is completely pointless of course).
View 5 Replies
View Related
Dec 14, 2012
I'm looking for an existing, or a way to create, a shortcut that will adjust the stoke width in Illustrator as I draw. Something similar to the bracket key in Photoshop for changing brush size on the fly.
View 3 Replies
View Related
Mar 19, 2013
I want it to be a variable stroke, so I loaded up “Width Profile 2” in the profiles. The trouble I am having, is that Illustrator defaults to start the larger dots in the bottom right hand corner, and I would like the “starting point” to be in the middle of the line if you know what I mean. I'm still happy for the dots to start big, then gradually decrease in size, but I want to control where the “beginning” is.
View 2 Replies
View Related
Apr 27, 2012
Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
View 7 Replies
View Related
Jan 24, 2008
I have dozens of images to open and I need to resize them all to be 38mm wide. I don't care how tall they are, but they must be 38mm wide to fit the column widths I need them for. Is there a way to preset the size that the images open in so that they automatically open with the width resized to 38mm and the height proportionally adjusted?
View 1 Replies
View Related
Sep 14, 2013
I have a external monitor connected to a laptop so there are two monitors used at the same time. The external monitor is having somewhat different constract and tone display result from the first one. So due to the different contrast setting, my external monitor is having a greater constrat than my main monitor, therefore a picture looks more constrasty in my external monitor. That being described, let me explain what the problem I have.
When I paint using Photoshop CC, I found that Photoshop seems to automatically adjust it's constrast display of that picture while moving around in the different monitor. In this case, I have Photoshop window opened in my external monitor and it has automatically reduced contrast without me noticing, so that the picture in Photoshop in my external monitor looks like having same contrast in that of my main monitor. It's not until I finish my paint and closed Photoshop and opened my paint using AcdSee did I spot the problem. All of a sudden the picture become way more contrasty than what I've been working on in my Photoshop application.
I was wondering what happened and did some testing. And it turns out while my Photoshop is opened in the external monitor. it will decrease the contrast of whatever displayed in it, if I move it back to the main monitor, the constrast is back.
This problem only happensin the case where I havce more than one monitor working. If I only have my main or external monitor on, Photoshop will not auto adjust the contrasts even the the contrasts of two monitors are different.
This have giving me a huge problem. With this auto adjust contrast thing I will not be able to produce accurate picture result because I do not have a fixed standard to look onto. Even the external monitor is contrasty at least I know I can expect the result I produced to be the same as that I see in the photoshop so different monitor doesn't matter. But now since Photoshop is reducing the contrast somehow I get a much contrasty result than I will have expect once I close Photoshop and open that picture in other application.
I took this by placing Photoshop between two monitors so the picture is slipt in two. As you can see Photoshop will auto adjust the contrast in the external monitor so one picture is having two completely different effect! Since monitor contrasts are not reflected in screenshot so you can clearly see the differences.
The reason I say photoshop adjusted the contrast is because I can see this happening, when I drag it to the second monitor without releaseing the mouse, the picture in it is still the same across two monitors. But once I release it, after one second the part in the external monitor changes.
View 3 Replies
View Related
Nov 27, 2013
Is there a way to adjust the assembly and the parts automatically adjust as well?
View 7 Replies
View Related
Jul 18, 2005
I have just discovered actions which are great and timesaving. One question I have is that if I have an action to adjust levels will the script just bring the highlights and shadows buttons to where i ran in the script or is it clever enough to realise that the script is taking them to the ends of the histogram?
View 1 Replies
View Related
Apr 24, 2011
Is it possible to add up/down arrow beside the text boxes (spinner) to adjust the height and width of an object by clicking with a mouse?
I hate pressing F8 at startup!
View 3 Replies
View Related
Feb 17, 2012
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
View 2 Replies
View Related
Nov 28, 2013
I want get the rooms dimenstions, for calculating the width of the corridors.
View 1 Replies
View Related
