I ran into a problem when trying to create a new floor slab for a basement project.
Rivet stops working and shuts down after I try and load "sand" into the material column. The same thing happens when I tried to load "gravel". Interestingly enough, "Earth" can be loaded with no problems.
Is there a quick way of profiling topography under a undulating concrete floor slab? In other words so that the topography follows the underside surface of the slab. I know this is possible by adjusting each point on the topo surface but is there a quicker way?
View 1 Replies View RelatedWe are looking for a way to document the free height, between two floor slab on two different levels, on our floorplans. We would like to use some sort of tag. And not just text.
View 9 Replies View RelatedI originally created a slab with the full version of Autodesk Revit 2013 with POINTS to create a slope to the slab. There does not seem to be a way to edit those points with Autodesk Revit LT. There appears to be an alternate method in the LT version to create slopes utilizing slope arrows. So is SLOPE EDITING no longer a feature with LT?
View 2 Replies View RelatedI am looking to create an irregular concrete slab, with barrel vaulted ceilings on a small radial section of a circular slab, and a a parabolically curved upper section to the slab, and a large punched hole in the middle of the slab. To this point, I have been able to achieve this using multiple components and masses, but I was wondering if there was a way to make a single object with a single solid material that may be able to achieve the same effect. I have attached a section for ease of explanation.
View 8 Replies View RelatedI'm trying to create a custom floor tile but having issues doing it. 1st I create a generic 12' create floor, then use that floor to create a subfloor to try to create a tiled floor that is offset 1/4" from the initial floor. I select the floor, click edit material, select ceramic tile,.. get to the graphics property, select surface pattern and select 12" tile, click done, then OK but ... nothing happens.
I would also like to customize a pattern. I would like to create a patter that uses a 12"X12" tile with (2) 5 7/8"X5 7/8" tiles.
I tried to use the *.PAT technique but finding it difficult to do what I want so I found the hatch22 but still find that rather difficult.
I need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
Isn't there any way to create a floor or roof using a work plane as the level?
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.
I beleieve this is the right name.
I have linked a file that is far away from the window (cropped or not) and I am having issues with trying to locate it on my view how can I relocate it to where my work is?
or maybe its called the view window?
After having a problem projecting my walls to my roof slab (flat roof), which worked fine in previous sessions; and then trying the standard solutions of making sure my walls clean up properly, etc., I determined the problem was actually in that the walls do not like to project to a roof with components. In my last work session, I added a component to my roof. I switched back to a "standard" roof slab, projected the walls, and then switched back again to my roof with components.
View 1 Replies View RelatedI am trying to figure out how to see the first floor in a five floor building. This model is a 3D Cad file imported into Revit. I need to look inside the building and place equipment on the first floor.
View 3 Replies View RelatedI want to know if is it possible to create design options in a grouped project.
View 3 Replies View RelatedIs possible create a URL project parameter associated for revision clouds?
I want to make a hyperlink into a revison cloud for a DOC file, but I not found the Revision Cloud category in Project Parameters/Parameter Properties dialog.
I search for this solution because I don't know the limit size of the parameter Comments. I wish add many comments on the project and these can have texts and images, so I choosed put comments in a DOC file.
I am working on the project with sloping roof. I have drawn beams with slope. however when I am drawing slab with slopes I am not getting this slopes. There is gap between the beams and slab. I have attached screen shot for more information. Also I need to apply loads for this sloped roof.
View 4 Replies View RelatedI've had a request from on of our users to replicate something that has been done for years in 2D CAD. They want a marker to show changes in floor levels that look something like this:-
The annotation needs to be able to read the slab on either side of the step marker and hopefully if possible the difference be represented as text. The datum levels are secondary and it is really the depth of the step that seems to be more important. I do however want to avoid these being just dumb text as if/when the design evolves someone will forget to modify the text.
Here is an example of a few showing two steps in the slab and the results we would want.
I have tried loading/nesting a standard spot level in thinking if I had two in an annotation that this might work, but I was unable to even place a spot marker within the family which makes some sense I suppose.
Is this even technically possible...? I realize the origin usually determines what hosts the family and how, but I guess we are looking for something with a double origin, which is why I think this may not be possible...?
I was having trouble with the edit sketch options coming up when I initiated a command that needed it. I upgraded to Update 2 and It seemed to fix it. But now it's happening when when I select a floor. I'm not getting the option to edit the floor. The context options don't match what I have selected. What is the problem and how can I fix this?
View 1 Replies View RelatedOur model uses several material types for insulation, mostly rigid variations at this point. The various materials are used in floor, wall and roof systems. Is there a way to create a single schedule that would list insulation quantities across all three system types?
View 2 Replies View RelatedI have a Revit file with over 1,000 materials and associated appearance assets. It was created in a previous version of Revit before library support. What I want to do is create libraries from them. However, the only instructions to add them one at a time using dragging and dropping. That will take me days to do. Is there a way to simply create an asset or material library out of multiple materials from a project file at one time without having to individually select them?
View 1 Replies View RelatedI have to use concrete hollow core slab in my project, but I was wondering, if it is possible that the hollow core slab automatically adjust itself to the width of the room. I have attached a screen-shot of the problem, where the the last hollow core slab overlap the beam. I can manually change the width of the last beam, but it would take a lot time, moreover if I change the dimension of the overlapped beam, then i have to readjust the last hollow core slab.
View 1 Replies View RelatedI want to create jig to insert hallow slab (polyline) everything works fine until I am trying to use an added keyword for rotation then Autocad crashes really bad (no error information). Here is a code, in comment place where program crashes.
Ps: I've already been on through the interface and tried to use text jig but no result in my case
Imports SystemImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputNamespace AutoCAD_VB_plug_in1 Public Class [code]........
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedHow to set the “height” of each floor?
I’m wondering how to set the height of each floor in the Revit to adjust the “height” of the wall accordingly?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I have duplicated many floors now in the Revit program and applied the same material to them and no matter what I end up with a duplicate area for that material in the floor material schedule takeoff.
Steps taken to correct this so far are:
1. Technical support @ Autodesk suggested that I uncheck the wrap part in the floor edit. The floor already has it unchecked and furthermore the wrap part is greyed out.
2. I have used parts and I guess that I can do this for it works. it is just that I would like to do floors because I don't have to spend time dividing them for a simple material takeoff.
I just want to be able to apply a material to a floor and have that floor shedule the area of that material only ONCE!
The issue is cutting an opening in an existing floor so that in only shows in a new phase.I have created a floor based generic family with an opening tool and added an edge liner as a sweep. It hosts onto the floor and cuts it OK (in section and 3D). BUT in plan view objects below dont show through - see blue dashed on the screen clip. You will see that the red dotted opening>vertical cut show the stair below OK. Have a go (floor opening lined.rfa) and tell me why the opening is opaque!
View 2 Replies View RelatedI want to attach a wall to a floor as shown in the picture. The wall has 2 layers. The Finish-Layer is supposed to cover the floor. (Now done by using the function "Top Extension Distance" for the finish layer.)I am searching for a solution that allows me to change the shape of the floor. The wall should then follow the shape of the floor.
View 1 Replies View RelatedMy stairs won't extend up to second floor. I am using Revit 13 and have created many stairs in past with other models. I have tried stair by sketch and stair by component but they keep stopping about 2 feet short of the floor drawing a standard U shape.
View 2 Replies View RelatedI imported a scanned drawing into Revit and traced it. I put the walls and floors in, then was inserting doors. I tried to find a particular door, but found I clicked on the wrong door and closed Revit instead of the screen I was in. However, when I brought Revit back up, I could no longer see any Floorplan, but my 3d was still visible. How do I retrieve or make visible Level 1 or 2? (When I tile the Floorplan Level 1 and the 3D drawing, my 3d drawing will turn blue if I box in the blank area on my Floorplan screen, so I assume it must still be there).
The other question I need answered is how to insert the geometric figure/camera that shows each side of an elevation? When I imported my scanned drawing, it was much larger than the area within the four “eyeballs”, but I have tried moving it and don’t see them.
I have a file that I have applied different floor finishes to different rooms based on flooring patterns and hatches - they are not visible in the floor plans . Funny thing is if I make a seperate room outside the project in the same view and assign it flooring patterns - it does show up all the floor finishes. The only reason I can think of is phases. I have attached images for reference.
View 1 Replies View RelatedIf you already have your main floor created in a Revit LT model and you later decide you'd loke to add a small addition to that same floor, not as an addition, but simply as a revised floor plan that expands the previous area, can you just draw another floor area and will that blend into the 1st main floor? Or do you have to redraw the whole floor? Or join the 2 pieces?
View 3 Replies View Related