Revit :: How To Apply Material To A Floor
May 31, 2012
I have duplicated many floors now in the Revit program and applied the same material to them and no matter what I end up with a duplicate area for that material in the floor material schedule takeoff.
Steps taken to correct this so far are:
1. Technical support @ Autodesk suggested that I uncheck the wrap part in the floor edit. The floor already has it unchecked and furthermore the wrap part is greyed out.
2. I have used parts and I guess that I can do this for it works. it is just that I would like to do floors because I don't have to spend time dividing them for a simple material takeoff.
I just want to be able to apply a material to a floor and have that floor shedule the area of that material only ONCE!
View 5 Replies
ADVERTISEMENT
Aug 19, 2010
I've created some generic walls and I wanted to overide the material but I can't find a way to do it. I thought I could do it in revit arch 2010 but using properties and edit type but I don't get the materials selection using revit arch 2011.
View 3 Replies
View Related
Apr 9, 2012
I am trying to figure out how to see the first floor in a five floor building. This model is a 3D Cad file imported into Revit. I need to look inside the building and place equipment on the first floor.
View 3 Replies
View Related
Mar 16, 2011
I've used an A&D mat to create a polished plastic floor.Now I would like to apply a circle-shaped sticker onto the floor by using a tif, tga or png, but the only result I get is either the sticker (alpha masked -> cirlce shaped) and a totally black A&D mat (premultiplied alpha off) OR the sticker (not alpha masked -> circle shaped sticker and the rest of the white bckgr bmp) and a black A&D mat (premultiplied alpha on).
As shown this procedure works with the standard material but won't with an A&D mat.Or maybe provide an alternative method to apply alpha masked bmp onto A&D Materials?
View 5 Replies
View Related
Sep 15, 2012
How to set the “height” of each floor?
I’m wondering how to set the height of each floor in the Revit to adjust the “height” of the wall accordingly?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Oct 24, 2013
The issue is cutting an opening in an existing floor so that in only shows in a new phase.I have created a floor based generic family with an opening tool and added an edge liner as a sweep. It hosts onto the floor and cuts it OK (in section and 3D). BUT in plan view objects below dont show through - see blue dashed on the screen clip. You will see that the red dotted opening>vertical cut show the stair below OK. Have a go (floor opening lined.rfa) and tell me why the opening is opaque!
View 2 Replies
View Related
Jan 30, 2013
I want to attach a wall to a floor as shown in the picture. The wall has 2 layers. The Finish-Layer is supposed to cover the floor. (Now done by using the function "Top Extension Distance" for the finish layer.)I am searching for a solution that allows me to change the shape of the floor. The wall should then follow the shape of the floor.
View 1 Replies
View Related
Feb 11, 2013
My stairs won't extend up to second floor. I am using Revit 13 and have created many stairs in past with other models. I have tried stair by sketch and stair by component but they keep stopping about 2 feet short of the floor drawing a standard U shape.
View 2 Replies
View Related
Oct 1, 2011
I imported a scanned drawing into Revit and traced it. I put the walls and floors in, then was inserting doors. I tried to find a particular door, but found I clicked on the wrong door and closed Revit instead of the screen I was in. However, when I brought Revit back up, I could no longer see any Floorplan, but my 3d was still visible. How do I retrieve or make visible Level 1 or 2? (When I tile the Floorplan Level 1 and the 3D drawing, my 3d drawing will turn blue if I box in the blank area on my Floorplan screen, so I assume it must still be there).
The other question I need answered is how to insert the geometric figure/camera that shows each side of an elevation? When I imported my scanned drawing, it was much larger than the area within the four “eyeballs”, but I have tried moving it and don’t see them.
View 5 Replies
View Related
Feb 21, 2013
I have a file that I have applied different floor finishes to different rooms based on flooring patterns and hatches - they are not visible in the floor plans . Funny thing is if I make a seperate room outside the project in the same view and assign it flooring patterns - it does show up all the floor finishes. The only reason I can think of is phases. I have attached images for reference.
View 1 Replies
View Related
Jun 12, 2013
If you already have your main floor created in a Revit LT model and you later decide you'd loke to add a small addition to that same floor, not as an addition, but simply as a revised floor plan that expands the previous area, can you just draw another floor area and will that blend into the 1st main floor? Or do you have to redraw the whole floor? Or join the 2 pieces?
View 3 Replies
View Related
Jan 12, 2013
See attachment.
I can't figure out why the bas is visible through the floor :s while the middle part is not. The part where you can see the color of the stairs is cut out of the floor.
View 7 Replies
View Related
Nov 5, 2012
I'm trying to create a custom floor tile but having issues doing it. 1st I create a generic 12' create floor, then use that floor to create a subfloor to try to create a tiled floor that is offset 1/4" from the initial floor. I select the floor, click edit material, select ceramic tile,.. get to the graphics property, select surface pattern and select 12" tile, click done, then OK but ... nothing happens.
I would also like to customize a pattern. I would like to create a patter that uses a 12"X12" tile with (2) 5 7/8"X5 7/8" tiles.
I tried to use the *.PAT technique but finding it difficult to do what I want so I found the hatch22 but still find that rather difficult.
View 6 Replies
View Related
Apr 3, 2013
I have a multi-story model with "Existing" and "New Construction" phases present on each level. The graphic overrides are functioning properly on the 1st Floor (existing is displayed in lighter line weight and half-tone) but for some reason the overrides are not applying to the 2nd Floor.
View 1 Replies
View Related
Nov 12, 2011
I am currently modeling a 2-Story Home. I have everything modeled the way I want it, but when I go to the elevations I see a gap where the siding and the sheathing don't touch between floors.
My exterior walls:
Core: 3 1/2" stud + 1/2" SheathingExterior: Air Barrier + 3/4" SidingInterior: 1/2" Gyp BdMy floors: Main:
Core: 3/4" Sub-Floor + 11 7/8" TJI + 1 1/2" Rim-JoistMy Floors: SecondCore: 3/4" Sub-Floor + 11 7/8" TJI
The floors are modeled to the stud to allow sheathing and siding to extend. I knew of this situation beforehand because tutorials on the interwebs say this is the way to combat your problem:
I go into the my exterior wall, select edit type, edit structure, (set preview to section) select siding, and then zoom in on the bottom of the wall in the section preview. The bottom of the siding highlights and a "unlock" toggle appears. I unlock it. I do the same to the sheathing. Then I go to my elevations, cut a section, and zoom in to extend the sheathing and siding.
Side Bar: Why don't the two extend independently? They should.
To the top of wall below.
View 2 Replies
View Related
Feb 27, 2010
Can I import a floor plan in PDF format to begin a drawing?
View 9 Replies
View Related
Jul 24, 2012
I just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right. What's the reason of it?
View 9 Replies
View Related
Apr 24, 2013
I just discovered the rafter framing extensions for revit. It is very handy but at places where there is a hip/valley the rafters are shown until the hip/valley. at all the other places (where there are ridges) they are cut at the place where the roof is cut.
I found another thread where they say to change the visibility settings of the rafter family what I already did before but it does not change anything in my floor plan.
View 3 Replies
View Related
Sep 23, 2013
My template don't have Floor Plan and Level.
View 1 Replies
View Related
May 27, 2010
how to create a floor or structural slab that is both sloped AND has a variable thickness?
I can do either, but not both. Thinking that I may need to create a generic mass.
View 7 Replies
View Related
Nov 2, 2011
Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
View 3 Replies
View Related
Jun 28, 2011
I have created my model, and have placed the floor assembly in. It is concrete and I see the concrete pattern on the floor. How do I hide or turn that off? I cannot find anything in Visibility Graphics or in the actual floor family...
View 6 Replies
View Related
Nov 14, 2012
I have a floor joist/subfloor/finish floor system where the joists are hung from the sill inside the foundation wall, this means that the joists stop at the wall but the subfloor will continue over the sill plate and the finish floor will stop at the inside edge of the bottom wall plate. As near as I can figure, in order to get this to show correctly in section I really need to create the complete floor assembly by stacking 3 separate floor sub-assemblies (framing, sub-floor, finish floor) is this correct? (this is the method I'm currently using) Is there a way to manipulate the sub-components in section that I haven't found?
View 2 Replies
View Related
Feb 24, 2014
How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies
View Related
Nov 14, 2013
To create balconies, do I just extend the floor out to the balcony area and then add railings? Or is there a more appropriate way to do it?
View 3 Replies
View Related
Apr 16, 2012
Using Reivt 2011. I am trying to get my callouts to display my devices. I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties. I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked.
View 4 Replies
View Related
Dec 12, 2013
I'm trying to separate my ground floor slab into two different slabs each with a different stratigraphy of layers. How can I do this? I've edited the footprint so that it looks like there are two distinct floor boundaries but when I go to select the floor in order to edit the type, the entire floor, or both "pieces" get selected and I can't seem to just edit one piece...
View 1 Replies
View Related
Mar 28, 2013
I need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
Isn't there any way to create a floor or roof using a work plane as the level?
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.
View 1 Replies
View Related
Apr 24, 2012
It appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.
The work around is to switch the view to wireframe.
View 9 Replies
View Related
Sep 20, 2012
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
View 1 Replies
View Related
Aug 31, 2012
Exist a way to Attach the top of the wall in a element that is not a floor or roof. I have a wall under a stair and i want to make de top of the with a slope.
View 2 Replies
View Related
