Revit :: Raise Cut Plane In Floor Plan View

Feb 24, 2014

How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.

View 1 Replies


ADVERTISEMENT

Revit :: Change Level Floor Plan View Is Associated To?

Oct 30, 2012

Is there a way to change the level that a floor plan view is associated to?

View 4 Replies View Related

Revit :: How To Get Floor Plan To Drafting View Without Export To AutoCAD

Mar 2, 2012

How can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay. 

View 2 Replies View Related

Revit :: Create Roof / Floor Using Work Plane?

Mar 28, 2013

I need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
 
Isn't there any way to create a floor or roof using a work plane as the level?
 
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.

View 1 Replies View Related

Revit :: Import A Floor Plan In PDF Format

Feb 27, 2010

Can I import a floor plan in PDF format to begin a drawing?

View 9 Replies View Related

Revit :: Top Mullion Show Up In The Floor Plan?

Jul 24, 2012

I just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
 
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right.  What's the reason of it?

View 9 Replies View Related

Revit :: Rafter Framing In Floor Plan

Apr 24, 2013

I just discovered the rafter framing extensions for revit. It is very handy but at places where there is a hip/valley the rafters are shown until the hip/valley. at all the other places (where there are ridges) they are cut at the place where the roof is cut.

I found another thread where they say to change the visibility settings of the rafter family what I already did before but it does not change anything in my floor plan.

View 3 Replies View Related

Revit :: Template Don't Have Floor Plan And Level

Sep 23, 2013

My template don't have Floor Plan and Level.

View 1 Replies View Related

Revit :: Doors Will Not Show Up In First Floor Plan?

Nov 2, 2011

Somehow today all the doors and cased openings dissapeared in my first floor plan.
 
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance. 

View 3 Replies View Related

Revit :: Can't Get Callout To Display Devices / Floor Plan

Apr 16, 2012

Using Reivt 2011.  I am trying to get my callouts to display my devices.  I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties.  I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked. 

View 4 Replies View Related

Revit :: Unable To Print Transparency From Floor Plan

Apr 24, 2012

It appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.

The work around is to switch the view to wireframe.

View 9 Replies View Related

Revit :: Changing The Wall Thickness In Floor Plan?

Apr 12, 2012

I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.

View 4 Replies View Related

Revit :: How To Create Or Reset The Floor Plan Window

Mar 7, 2013

I beleieve this is the right name.
 
I have linked a file that is far away from the window (cropped or not) and I am having issues with trying to locate it on my view how can I relocate it to where my work is?
 
or maybe its called the view window?

View 3 Replies View Related

Revit :: Unable To Select Walls / Windows On Floor Plan

Mar 20, 2013

Revit 2012.
 
I can not select the walls and windows on the floor plan, but can select everything else like the dim,text, section marks, etc.
 
I also can choose the walls of the first floor, if they are used as the underlay of the second floor. However, when I am in the first floor plan view, I can not.

View 3 Replies View Related

Revit :: 2013 - None Of Created Elements Are Visible In Floor Plan

Apr 4, 2013

I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?
 
"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."

View 6 Replies View Related

Revit :: Place AutoCad 3D Drawing Of Appliance Into Floor Plan

Jul 21, 2011

I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.

View 2 Replies View Related

Revit :: Error Message - None Of Created Elements Visible In Floor Plan

Dec 11, 2012

I am trying to place a receptacle on a wall and I keep getting this message "None of the created elements are visible in Floor Plan: Basement Demo. Plan - Electrical View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."  I have everything turned on in my visibility graphics.

View 2 Replies View Related

Revit :: How To Get Roof Beams / Windows To Show As Dash Dot In Floor Plan

Mar 21, 2013

Is there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?

View 3 Replies View Related

Revit :: Unable To Add New Objects - None Of Created Elements Visible In Floor Plan

May 31, 2012

Am getting warning "None of the created elements are visible in Floor Plan: 00 GF View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings". Phase settings are correct, no hidden elements etc. Cannot add anything by create similar, build panel. Its Revit 2013 - I have been getting a lot of cannot continue crashes but is this a forthcoming fix issue? 

View 2 Replies View Related

Revit :: Reflecting Ceiling Plan In Plan View?

May 30, 2012

I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I  put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.

View 7 Replies View Related

Revit :: Plan Region Cut Plane Is Set To Lower Level

Jan 19, 2012

I am using Revit Architecture 2012 and I am having some issues with plan regions.  I am not able to get my stairs to show up sometimes and I cannot figure out why.  I have attached 2 images of my drawing to show the issue.  The 2 floors in this image are a basement and lower level.  I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'.  The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.

View 9 Replies View Related

AutoCad 3D :: Flattening Large 3D Model (hospital Ground Floor) To 2D Floor Plan Drawing

Oct 16, 2012

How to solve this problem of 'Flattening a large 3d model (hospital ground floor) to a 2d floor plan drawing'. The 3d model was made in Rhino and I saved it as a .dwg file because Rhino kept crashing with the command 'make 2d' (file too large maybe :/).

I don't know AutoCAD 3d so now, I'm trying to just change the line layers and eventually plot it all, but sometimes when I save the progress.... AutoCAD will delete sections of my work sometimes :/

View 9 Replies View Related

Revit :: Plan View Tags Referencing Wrong Dependent View?

Jan 10, 2012

We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets.  Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list.  If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically.  I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order. 

View 4 Replies View Related

Revit :: Show High Level Walkways And Balconies On Ground Floor Plan In High Volume Space?

Nov 15, 2012

How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
 
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?).  Also this seems slightly wrong given the amount of automation available.

View 4 Replies View Related

Revit :: 3D View Showing Floor Outline On Exterior Walls?

Jan 29, 2014

I am creating a two-storey single-family house.  The exterior wall assembly is Core Boundary, 3/8" Stucco (we apply a Stucco material to our Sheathing so in Section we aren't showing a finish material on the exterior), 5 1/2" <By Category> (our studs), Core Boundary, Air Barrier, 1/2" Gypsum Wall Board.  We draw the floor system to the face of our studs and extend our walls to the bottom of the floor system, then when we join geometry the floor cuts out the wall leaving only the wall sheathing extending to the face of our floor system.
 
My problem is when I create a 3D perspective view with the camera my floor system is showing through the walls.  It seems to thin out/disappear the larger the perspective view is on the page, but I can only make it so big on C-size page.
 
Is there a way to hide what Revit shows detailed behind the face of a material?(I tried hiding the floor system in my perspective view but it stills shows the floor outline, I'm assuming because it is being cut out of the assembly).

View 2 Replies View Related

Revit :: View Specific Parameter For Cut Plane

Feb 23, 2014

when I insert a window family the cut plane Revit uses is that of the family rather than that of the view. This causes a lot of problems for us when we need to cut the same window at different levels in different views and the window itself should look different. The window itself is built to look differnet at 3 ranges of cut plane height. However, if I try to control this throught yes/no visibility parameter it affects all views. I fail to make it view specific. Is there any way to make an instance parameter or view specific parameter for the cut plane/ visibility of parts in the window family. It is such a basic need for architects and I fail to understand its absence in the Revit. Generaly speaking one should be able to control what you see in each plan section view. It's an essential thing in architectural drawing.

View 9 Replies View Related

Revit :: How To Add Structural Plan View

Dec 23, 2013

I was following a tutorial when he created a structural plan where he'd place his footings. when i tried it on my Revit Architecture 2014, i found out that i didn't have that feature. is there any way i can turn it on? 
 
i'm not sure if he's using revit architecture because he just refers to it as Revit 2014. i made a floor plan below the 0 mark but things will be tidier if i could make structural plan views.

View 2 Replies View Related

Revit :: Visibility Of Beam In Plan View?

Jul 15, 2011

If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?

View 1 Replies View Related

Revit :: Coloured Plan View By Rooms?

Mar 6, 2013

Currently I have created Rooms and a Legend such that I have a coloured Plan View by Room department.
 
The colour boundaries extend to the centre line of the defining Walls. Is there a way to get the coloured zones to follow the Room boundaries?
 
I realise I can overwrite the Wall pattern and use a Solid pattern to hide the colour - but this is not what I want ...

View 2 Replies View Related

Revit :: Possible To Show Symbols In A Plan View

Jan 17, 2013

I'm currently looking into switching from Vectorworks to Revit due to a job application I'm being offered. What I really want to know is if the following floor plan is possible to make in Revit. I just want floor plans to be with color to better show the different things on it and make them more clear.
 
I also want to know if it is possible to show symbols in a plan view other than just a rendered hidden line view of the 3D part of it, so I can have a simplified version for the plan view and a detailed object for the 3D. Like you have a 2D-plan component for the plan views and e 3D component for all other views.

View 5 Replies View Related

Revit :: Create A Wall The Has Profile (in Plan View)

Nov 22, 2012

I need to create a wall the has a profile (in plan view).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved