I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replieshow to create a floor or structural slab that is both sloped AND has a variable thickness?
I can do either, but not both. Thinking that I may need to create a generic mass.
Can I import a floor plan in PDF format to begin a drawing?
View 9 Replies View RelatedI just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right. What's the reason of it?
I just discovered the rafter framing extensions for revit. It is very handy but at places where there is a hip/valley the rafters are shown until the hip/valley. at all the other places (where there are ridges) they are cut at the place where the roof is cut.
I found another thread where they say to change the visibility settings of the rafter family what I already did before but it does not change anything in my floor plan.
My template don't have Floor Plan and Level.
View 1 Replies View RelatedSomehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
I want to attach a wall to a floor as shown in the picture. The wall has 2 layers. The Finish-Layer is supposed to cover the floor. (Now done by using the function "Top Extension Distance" for the finish layer.)I am searching for a solution that allows me to change the shape of the floor. The wall should then follow the shape of the floor.
View 1 Replies View RelatedI'm trying to use a formula in a family that requires the host wall thickness.
I've setup an instance reporting parameter (dimensioned to the host wall faces) - which works fine in reporting the correct value.
But when I try to use that variable in a formula, I keep getting the error:
"Instance Parameters can't be used in Type Parameter formulas."
Is there a way of getting the reported dimension as a Type rather than an Instance - or is there another work around ?
How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies View RelatedUsing Reivt 2011. I am trying to get my callouts to display my devices. I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties. I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked.
View 4 Replies View RelatedIt appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.
The work around is to switch the view to wireframe.
Is there a way to change the level that a floor plan view is associated to?
View 4 Replies View RelatedI beleieve this is the right name.
I have linked a file that is far away from the window (cropped or not) and I am having issues with trying to locate it on my view how can I relocate it to where my work is?
or maybe its called the view window?
I am currently modeling a 2-Story Home. I have everything modeled the way I want it, but when I go to the elevations I see a gap where the siding and the sheathing don't touch between floors.
My exterior walls:
Core: 3 1/2" stud + 1/2" SheathingExterior: Air Barrier + 3/4" SidingInterior: 1/2" Gyp BdMy floors: Main:
Core: 3/4" Sub-Floor + 11 7/8" TJI + 1 1/2" Rim-JoistMy Floors: SecondCore: 3/4" Sub-Floor + 11 7/8" TJI
The floors are modeled to the stud to allow sheathing and siding to extend. I knew of this situation beforehand because tutorials on the interwebs say this is the way to combat your problem:
I go into the my exterior wall, select edit type, edit structure, (set preview to section) select siding, and then zoom in on the bottom of the wall in the section preview. The bottom of the siding highlights and a "unlock" toggle appears. I unlock it. I do the same to the sheathing. Then I go to my elevations, cut a section, and zoom in to extend the sheathing and siding.
Side Bar: Why don't the two extend independently? They should.
To the top of wall below.
Revit 2012.
I can not select the walls and windows on the floor plan, but can select everything else like the dim,text, section marks, etc.
I also can choose the walls of the first floor, if they are used as the underlay of the second floor. However, when I am in the first floor plan view, I can not.
I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?
"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."
How can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay.
View 2 Replies View RelatedI am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies View RelatedExist a way to Attach the top of the wall in a element that is not a floor or roof. I have a wall under a stair and i want to make de top of the with a slope.
View 2 Replies View RelatedHow to accomplish, and I've searched various places, is how to have a layered floor structure dovetail into a layered wall construction.
I have a cavity wall construction with inner leaf of blockwork - and an intermediate floor slab - concrete precast slabs with insulation and screed on.
The construction in Revit defaults to the whole floor structure finishing at the internal face of the wall. I need the slab layer of the floor to project into the inner blockwork, whilst having the other floor construction layers finishing flush with the wall. This needs to occur at the support end of the slab only rather than around the whole floor perimeter.
I'm working on a single wall type spanning ground floor up to the underside of the roof - should I be using separate walls for each floor ? (I read somewhere that it is advisable to break wall types by floor as costs may be different).
I have drawn an existing building thats needs a renovation. In the project i need to add 100mm insulation to the external side of the outer walls. Are there any way that i can add theese 100mm to my existing walls but only show the new 100mm in new construction ?
View 1 Replies View RelatedI am trying to place a receptacle on a wall and I keep getting this message "None of the created elements are visible in Floor Plan: Basement Demo. Plan - Electrical View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings." I have everything turned on in my visibility graphics.
View 2 Replies View RelatedIs there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?
View 3 Replies View RelatedAm getting warning "None of the created elements are visible in Floor Plan: 00 GF View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings". Phase settings are correct, no hidden elements etc. Cannot add anything by create similar, build panel. Its Revit 2013 - I have been getting a lot of cannot continue crashes but is this a forthcoming fix issue?
View 2 Replies View RelatedIs there a way to get the default wall/roof/floor materials to appear transparent?
View 1 Replies View RelatedWhen I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I have made my sections cuts through the floor plans, but when I view them, the walls I have cut through are not poched in to show that there is a solid wall there.
View 1 Replies View RelatedHow to solve this problem of 'Flattening a large 3d model (hospital ground floor) to a 2d floor plan drawing'. The 3d model was made in Rhino and I saved it as a .dwg file because Rhino kept crashing with the command 'make 2d' (file too large maybe :/).
I don't know AutoCAD 3d so now, I'm trying to just change the line layers and eventually plot it all, but sometimes when I save the progress.... AutoCAD will delete sections of my work sometimes :/
I need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedHow do you make a wall that's not rectanglar (in plan view)?
See attached image.
The brown color at the end of the wall indicates the polygonal shape which should be part of the wall.