Revit :: Can't Get Callout To Display Devices / Floor Plan
Apr 16, 2012
Using Reivt 2011. I am trying to get my callouts to display my devices. I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties. I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked.
View 4 Replies
ADVERTISEMENT
Feb 27, 2010
Can I import a floor plan in PDF format to begin a drawing?
View 9 Replies
View Related
Jul 24, 2012
I just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right. What's the reason of it?
View 9 Replies
View Related
Apr 24, 2013
I just discovered the rafter framing extensions for revit. It is very handy but at places where there is a hip/valley the rafters are shown until the hip/valley. at all the other places (where there are ridges) they are cut at the place where the roof is cut.
I found another thread where they say to change the visibility settings of the rafter family what I already did before but it does not change anything in my floor plan.
View 3 Replies
View Related
Sep 23, 2013
My template don't have Floor Plan and Level.
View 1 Replies
View Related
Nov 2, 2011
Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
View 3 Replies
View Related
Feb 24, 2014
How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies
View Related
Apr 24, 2012
It appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.
The work around is to switch the view to wireframe.
View 9 Replies
View Related
Apr 12, 2012
I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies
View Related
Oct 30, 2012
Is there a way to change the level that a floor plan view is associated to?
View 4 Replies
View Related
Mar 7, 2013
I beleieve this is the right name.
I have linked a file that is far away from the window (cropped or not) and I am having issues with trying to locate it on my view how can I relocate it to where my work is?
or maybe its called the view window?
View 3 Replies
View Related
Mar 20, 2013
Revit 2012.
I can not select the walls and windows on the floor plan, but can select everything else like the dim,text, section marks, etc.
I also can choose the walls of the first floor, if they are used as the underlay of the second floor. However, when I am in the first floor plan view, I can not.
View 3 Replies
View Related
Apr 4, 2013
I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?
"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."
View 6 Replies
View Related
Mar 2, 2012
How can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay.
View 2 Replies
View Related
Jul 21, 2011
I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies
View Related
Dec 11, 2012
I am trying to place a receptacle on a wall and I keep getting this message "None of the created elements are visible in Floor Plan: Basement Demo. Plan - Electrical View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings." I have everything turned on in my visibility graphics.
View 2 Replies
View Related
Mar 21, 2013
Is there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?
View 3 Replies
View Related
May 31, 2012
Am getting warning "None of the created elements are visible in Floor Plan: 00 GF View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings". Phase settings are correct, no hidden elements etc. Cannot add anything by create similar, build panel. Its Revit 2013 - I have been getting a lot of cannot continue crashes but is this a forthcoming fix issue?
View 2 Replies
View Related
Oct 16, 2012
How to solve this problem of 'Flattening a large 3d model (hospital ground floor) to a 2d floor plan drawing'. The 3d model was made in Rhino and I saved it as a .dwg file because Rhino kept crashing with the command 'make 2d' (file too large maybe :/).
I don't know AutoCAD 3d so now, I'm trying to just change the line layers and eventually plot it all, but sometimes when I save the progress.... AutoCAD will delete sections of my work sometimes :/
View 9 Replies
View Related
Apr 4, 2013
I have a renovation project that I have entered the building in a existing phase. I used the demolition tool to show work removed on a demo plan. I created a new construction plan and set the phase to "New Construction and the phase filter to "Show previous + new" . The problem is that all work to be demolished appears as existing and new work appears on the demo plan as existing.
View 2 Replies
View Related
Nov 15, 2012
How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
View 4 Replies
View Related
May 11, 2010
Explain the logic behind the differences between RVT Categories and how they display in Plan View?
Example:
I made a custom component (Family) that was set as the 'Generic Model'
Category.
When placed, its elevation was set above the Cut Plane but below the Top of the Primary View Range for the Plan View. The Object displayed in its entirety. I then decided that this component was really better categorized as
'Specialty Equipment'. So, I re-assigned it in the Family Editor, and re-loaded it into my Project. As I did this, the object disappeared from Plan View. I then switched to a 3D View to verify it was still present in the model - and it was.
So why does Generic Model Display, and not Specialty Equipment, I ask? I've discovered that if I lower the Elevation of the Specialty Equipment to exist at or below the Cut Plane, but above the Bottom of the Primary View Range; it will display in Plan View. I've also tested and discovered that adding Symbolic Lines to the Plan View of the Specialty Equipment in the Family Editor and re-loading into the Project will not overcome this issue of elevation - if the object is above the Cut Plane the Symbolic lines will not display either.
I note that Specialty Equipment does not have a "Cut" setting for Lineweights in Object Styles, and Generic Model does. Is this the indicator for this display behavior that I'm experiencing? And if so, why is 'Specialty Equipment' regulated to this type of Category? Why not have a 'Cut' setting for it?
Quite a fair bit of an Architectural model gets lumped into this Category:
lockers, toilet accessories, kitchen equipment, medical equipment, etc.
View 6 Replies
View Related
Apr 23, 2012
I use all the time L shape and U shape winder stairs in combination with the Monolithic Type.
We use to concrete the monolithic part of the stairs and then dress the stairs with treads and risers. The new tool looks that working very nice.
So OK I draw the U shape winder stair and of course i want to construct the stairs.
I want to prepape a detail plan view with dimensions only for the Monolithic Part (Concrete) of the stair but i can't find a way to dispay only the monolithic part without Treads and Riser.It is possible in 3d view but no in plan view. The news tool that calculate winder stairs is "half job done" if i can't print with dimension the concrete part of the winder stairs.
View 7 Replies
View Related
Apr 24, 2013
finding out the process from start to finish, with the finishing product being in autocad. Would a architect provide you with a drawn floor plan and then you would draw it up in auto cad?
View 2 Replies
View Related
Mar 8, 2013
Im trying to draw this floor plan, Actually I don't understand the dimensioning thats why im having a hard time . I also want to know how to draw the walls on the plan.
View 9 Replies
View Related
Jun 10, 2011
When I select the doors I want to use for my floor plan I can't see the picture of the door that I selected before and after I place it onto a wall, when you usually can. You can only see it on symmetric view, but not in a floor plan bird view, all you see is a gap in the wall (looks like the wall is split into two separate pieces). This only occurs for the doors, the rest of the design tools, I can see their pictures before and after, on the floor plan. I think maybe changed some settings, I'm not use. Maybe there is a way to set everything to deafult settings?
I'm using AutoCad Architecture 2011 (metric)
View 5 Replies
View Related
Apr 5, 2013
What is the universal symbol for the POTS connection on a wall?
View 1 Replies
View Related
Jul 8, 2013
having several simple (AuoCAD Architecture) DWG room floor plans, based on basic 2D lines, etc, I am searching for a possibility to make them ready for 3D (for e.g. converting lines to wall objects with default height, etc).
Are there any common tools specialized on this issue?
Or would it make sense to build for e.g. a VBA tool to support the CAD technician for repetitive tasks, like extrusions, in order to goal 3D, without having to draw everything (new) from scratch.
View 1 Replies
View Related
Sep 30, 2012
who have time for draw a floor plan as .dwg file? She send me a .skp File from a House but i don´t have enough experience for draw it in Auto CAD architecture file.
View 9 Replies
View Related
Jul 15, 2012
I am drawing a floor plan in my autocad and if i want the entire floor plan to be moves to the origin how i can do it.
And also if i make the dimension and the text and when i plot and set different scales and different viewports how i can get the same size of the text and dimension on both the viewports on the layout.
View 4 Replies
View Related
Apr 9, 2012
I am trying to figure out how to see the first floor in a five floor building. This model is a 3D Cad file imported into Revit. I need to look inside the building and place equipment on the first floor.
View 3 Replies
View Related