Revit :: Import A Floor Plan In PDF Format
Feb 27, 2010Can I import a floor plan in PDF format to begin a drawing?
View 9 Replies
ADVERTISEMENT
Revit :: Top Mullion Show Up In The Floor Plan?
Jul 24, 2012I just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right. What's the reason of it?
Revit :: Rafter Framing In Floor Plan
Apr 24, 2013I just discovered the rafter framing extensions for revit. It is very handy but at places where there is a hip/valley the rafters are shown until the hip/valley. at all the other places (where there are ridges) they are cut at the place where the roof is cut.
I found another thread where they say to change the visibility settings of the rafter family what I already did before but it does not change anything in my floor plan.
Revit :: Template Don't Have Floor Plan And Level
Sep 23, 2013My template don't have Floor Plan and Level.
View 1 Replies View RelatedRevit :: Doors Will Not Show Up In First Floor Plan?
Nov 2, 2011Somehow today all the doors and cased openings dissapeared in my first floor plan.
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance.
Revit :: Raise Cut Plane In Floor Plan View
Feb 24, 2014How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies View RelatedRevit :: Can't Get Callout To Display Devices / Floor Plan
Apr 16, 2012Using Reivt 2011. I am trying to get my callouts to display my devices. I can see the area that defines the callout but none of my devices shown not matter what options i choose to change in the properties. I tried going to a view thats good, create a view template and assign it to my callout but that hasnt worked.
View 4 Replies View RelatedRevit :: Unable To Print Transparency From Floor Plan
Apr 24, 2012It appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.
The work around is to switch the view to wireframe.
Revit :: Changing The Wall Thickness In Floor Plan?
Apr 12, 2012I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies View RelatedRevit :: Change Level Floor Plan View Is Associated To?
Oct 30, 2012Is there a way to change the level that a floor plan view is associated to?
View 4 Replies View RelatedRevit :: How To Create Or Reset The Floor Plan Window
Mar 7, 2013I beleieve this is the right name.
I have linked a file that is far away from the window (cropped or not) and I am having issues with trying to locate it on my view how can I relocate it to where my work is?
or maybe its called the view window?
Revit :: Unable To Select Walls / Windows On Floor Plan
Mar 20, 2013Revit 2012.
I can not select the walls and windows on the floor plan, but can select everything else like the dim,text, section marks, etc.
I also can choose the walls of the first floor, if they are used as the underlay of the second floor. However, when I am in the first floor plan view, I can not.
Revit :: 2013 - None Of Created Elements Are Visible In Floor Plan
Apr 4, 2013I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?
"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."
Revit :: How To Get Floor Plan To Drafting View Without Export To AutoCAD
Mar 2, 2012How can i get Floor plan etc to drafting view whitout export to Auto cad and back to revit 2012?? Or freeze a Floor plan will be okay.
View 2 Replies View RelatedRevit :: Place AutoCad 3D Drawing Of Appliance Into Floor Plan
Jul 21, 2011I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies View RelatedRevit :: Error Message - None Of Created Elements Visible In Floor Plan
Dec 11, 2012I am trying to place a receptacle on a wall and I keep getting this message "None of the created elements are visible in Floor Plan: Basement Demo. Plan - Electrical View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings." I have everything turned on in my visibility graphics.
View 2 Replies View RelatedRevit :: How To Get Roof Beams / Windows To Show As Dash Dot In Floor Plan
Mar 21, 2013Is there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?
View 3 Replies View RelatedRevit :: Unable To Add New Objects - None Of Created Elements Visible In Floor Plan
May 31, 2012Am getting warning "None of the created elements are visible in Floor Plan: 00 GF View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings". Phase settings are correct, no hidden elements etc. Cannot add anything by create similar, build panel. Its Revit 2013 - I have been getting a lot of cannot continue crashes but is this a forthcoming fix issue?
View 2 Replies View RelatedAutoCad 3D :: Flattening Large 3D Model (hospital Ground Floor) To 2D Floor Plan Drawing
Oct 16, 2012How to solve this problem of 'Flattening a large 3d model (hospital ground floor) to a 2d floor plan drawing'. The 3d model was made in Rhino and I saved it as a .dwg file because Rhino kept crashing with the command 'make 2d' (file too large maybe :/).
I don't know AutoCAD 3d so now, I'm trying to just change the line layers and eventually plot it all, but sometimes when I save the progress.... AutoCAD will delete sections of my work sometimes :/
Revit :: Show High Level Walkways And Balconies On Ground Floor Plan In High Volume Space?
Nov 15, 2012How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
AutoCad :: How To Know Process Of Floor Plan
Apr 24, 2013finding out the process from start to finish, with the finishing product being in autocad. Would a architect provide you with a drawn floor plan and then you would draw it up in auto cad?
View 2 Replies View RelatedAutoCad :: Drawing Floor Plan
Mar 8, 2013Im trying to draw this floor plan, Actually I don't understand the dimensioning thats why im having a hard time . I also want to know how to draw the walls on the plan.
View 9 Replies View RelatedAutoCAD Architecture :: Cannot See The Doors On Floor Plan
Jun 10, 2011When I select the doors I want to use for my floor plan I can't see the picture of the door that I selected before and after I place it onto a wall, when you usually can. You can only see it on symmetric view, but not in a floor plan bird view, all you see is a gap in the wall (looks like the wall is split into two separate pieces). This only occurs for the doors, the rest of the design tools, I can see their pictures before and after, on the floor plan. I think maybe changed some settings, I'm not use. Maybe there is a way to set everything to deafult settings?
I'm using AutoCad Architecture 2011 (metric)
AutoCAD 2010 :: Floor Plan Symbols
Apr 5, 2013What is the universal symbol for the POTS connection on a wall?
View 1 Replies View RelatedAutoCAD Architecture :: Convert 2D Floor Plan To 3D
Jul 8, 2013having several simple (AuoCAD Architecture) DWG room floor plans, based on basic 2D lines, etc, I am searching for a possibility to make them ready for 3D (for e.g. converting lines to wall objects with default height, etc).
Are there any common tools specialized on this issue?
Or would it make sense to build for e.g. a VBA tool to support the CAD technician for repetitive tasks, like extrusions, in order to goal 3D, without having to draw everything (new) from scratch.
AutoCad :: Draw Floor Plan As DWG File?
Sep 30, 2012who have time for draw a floor plan as .dwg file? She send me a .skp File from a House but i don´t have enough experience for draw it in Auto CAD architecture file.
View 9 Replies View RelatedAutoCad :: Bringing Floor Plan To The Origin (0 / 0)
Jul 15, 2012I am drawing a floor plan in my autocad and if i want the entire floor plan to be moves to the origin how i can do it.
And also if i make the dimension and the text and when i plot and set different scales and different viewports how i can get the same size of the text and dimension on both the viewports on the layout.
Revit :: How To See First Floor In Five Floor Building
Apr 9, 2012I am trying to figure out how to see the first floor in a five floor building. This model is a 3D Cad file imported into Revit. I need to look inside the building and place equipment on the first floor.
View 3 Replies View RelatedPhotoshop :: Scale Image Of Floor Plan Without Cropping It
Sep 7, 2013I need to scale an image of a floor plan without cropping it. I know a specific dimension in the floor plan and need to scale the whole image without cropping to that specific dimension.
View 1 Replies View RelatedAutoCAD 2013 :: Normalizing Text On Floor Plan?
Aug 7, 2013I am working with architectural floor plans in AutoCAD 2013 trying to get all of the room name / number annotations uniform. The drawing is a compilation of a many different drawings created by different architects at different times, so the room numbers are not the same size.
I have all of the room names on their own layer and all of the room numbers on their own layer. Each name / number is a block. Is there a way for me to easily get all of the text the same size? So far the only way I have figured out to do this is using the "scale" function on each individual text block, this is not ideal as there are thousands of rooms...
AutoCAD Architecture :: Room Tag - Use Floor Plan As Xref
Jul 11, 2012I have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies View Related