Illustrator :: Adjust Starting Point Anchor Of A Variable Width Profile?
Mar 19, 2013
I want it to be a variable stroke, so I loaded up “Width Profile 2” in the profiles. The trouble I am having, is that Illustrator defaults to start the larger dots in the bottom right hand corner, and I would like the “starting point” to be in the middle of the line if you know what I mean. I'm still happy for the dots to start big, then gradually decrease in size, but I want to control where the “beginning” is.
I have a pre-existing graphic uses a stroke with variable with profile (I think) or a special brush to make it look like it's hand drawn. I'd like to apply the same effect to a few new illustrations to keep the style consistent. For whatever reason when I ungroup the graphic and select one of the paths, the stroke weight and variable width profile remain disabled (see pasted toolbar graphic below). The brush still says "Basic" despite the fact that visually it is certainly not the basic brush.
Selected Path
Toolbar (I realize that it says Group instead of Path, but even if I ungroup again and select the path the same options are disabled).
I'm working on a reflective drawing and using gradients on strokes. I've been using pressure sensitive calligraphic brushes I made. Now I'm trying to use variable width preset profile brushes. It works fine for the first stroke, but every time I make a new stroke, it reverts back to a calligraphic pressure brush. How can I keep my brushes the same profile until I manually select it to be different? I've gone back and forth between the brush tool and pencil tool and neither will keep any basic variable width profile past the first stroke. I have to select every brush stroke and change it again and again after drawing it.
I’m using Adobe Illustrator CS6 with a mouse rather than a pressure graphics tablet.
When I create a stroke using the Paint brush tool I would like the stroke to contain a variable width profile. For example narrower at the beginning and end of the stroke but thicker in the middle. Now I can do this by selecting the line after I have made the stroke and choosing the Basic Brush Definition from the drop down list. But if i try to draw a new line the settings are reset again. I cannot create a variable stroke while creating the stroke. The brush definition keeps resetting to 5 pt Round and stroke width 1 pt. It would be much quicker if the stroke remained as a varying width profile as I created the strokes.
I noticed the same problem with the blob brush tool except it's even worse. With the blob brush tool the stroke weight always resets regardless of whether or not I try to set a Variable width profile.
I tried deselecting "New Art has Basic Appearance" mentioned on another forum but that didn't work.
[URL]
Notice the variable width profile is maintained as the artists draws. It doesn’t keep resetting.
Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.
I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
I use Illustrator CS5 and can not blend variable width strokes in Illustrator. I can not do that even with the same width profiles unless they are expanded. I could not find any questions similar on the net regarding this, but wanted to double check before I just made the necessary changes. I'm a bit confused because Adobe 'help' shows how powerful the blends of objects are, but we can't do them as strokes?
I want to keep the blend as strokes not expand them. What is the best way to view how the blend will look with variable widths without expanding and then 'undoing' a bunch of times.
but is there a hot key for expanding the blend without going into object-blend-expand?
Ive been messing around with the variable width tool, Im not sure I i changed something, I did try to restore defaults but when I make a change it changes the opposite side of the image. For example In screen shot I changed the width on the left and the effect showed up on the right.
I would like the width to change where I change it.
In Illustrator CS6 and CC, when the stroke width tool is used on a curve, the curve is actually made up of a series of straight lines instead of smooth vector curves:
whereas in CS5 it looks perfect.These images may be too small to see the details, but the difference is there. Is there a workaround for this? Or is it recognized as a bug?
I'm looking for an existing, or a way to create, a shortcut that will adjust the stoke width in Illustrator as I draw. Something similar to the bracket key in Photoshop for changing brush size on the fly.
In Illustrator I have a path, I choose the add anchor point tool and am positive I have the cross hair exactly on the path but it keeps telling me I can't add the anchor point.
I've noticed that in Illustrator CC (17.1) the pen cursor doesn't automatically let you add or delete an anchor point anymore, when in Pen tool mode (P). It used to be an automatic feature in CS5, where a + or - sign would show up whenever I hovered over a selected path with the tool.
I have had this problem since I started using patterns. Basically when I put a pattern on a path I want to then move it along that path so it starts where I want it to start, not neccessarily on the path's starting point.
There is an image of how it looks like
I created a simple pattern to show my issue. For example I want to move this pattern along this circle so it looks like this (triangle points up)
As you can see I rotated the whole circle to get the right outcome I need, but if it was just a regular path I would not be able to fix it this way.
Is there a way to do that? Something like moving text along a path.
In PS you can drag the center anchor point of an object anywhere within the object or canvas, allowing you to rotate around that custom location versus the dead-center of the object.
Is there a way to somehow define a shortkey to the process of removing our last anchor point's unused handle?
I am talking about this:
To be able to make a sharp corner I have to manually click on the anchor point so the handle which is still unused gets deleted. The anchor points are particulary small and the don't scale when zooming so sometimes it's just hard to click them and therefore I would love if I could automatically remove the handle with a key/key combination.
I have made a curved path in Illustrator CS6, just a simple stroke (left in picture). Is there an easy way to round the corner of the end of it? Something like the image on the right? (I just tossed a circle over top to give an idea)
I have a shape I made with the pen tool, and now I want to align one anchor point of the shape with the middle of a rectangle. How can I do this? It doesn't seem like I can do what I do for objects, which is select both objects, click the object I want to align to, and hit align. If I'm not describing this properly let me know and I can try to clarify.
I have recently upgraded to CS6 from CS2. I do a lot of digital inking in Illustrator as part of my job. In CS2 I would create a simple tapered brush using 4 anchor points. When I would draw a brush stroke say with two anchor points, and then expand that brush stroke. Illustrator CS2 would convert the outlined tapered brush stroke back to the the original 4 anchor point path that I had originally created with maybe one extra point if the stroke curved drastically. Now is CS6 illustrator creates that same expanded brush with 9 to 12 anchor points in the path. This makes the program completly useless for my task. Is there anyway to correct this?
I would like to select an anchor point and adjust it so that it creates a perfect right angle. How can I do that?
Imagine some closed, filled shape, made up of a dozen anchor points. I would like to select one of those anchor points (a corner anchor point, not a smooth anchor point), and adjust it (built-in function? script?) so that it create a perfect right angle (90 deg.). This essentially would mean moving it to just the right spot so that the lines connecting it to its two neighbouring anchor points would form a right angle.
do not assume that the resulting right angle would necessarily be orientated along a North-South axis, or any other rational compass direction.
Is there any way to find a specific point on a path, that is not necessarily an anchor point?
What I'd like to be able to do is tell Illustrator "Give me the coordinates of the point that's exactly at half of this path's length" or "... exactly 25% ...". And if that's possible, can I somehow add an anchor point to that point, or cut the path at that point?
Are there any options to specify the "positions" etc. of handles of anchor points in order to be able to shape a little more precise for example for an image that has to be identically left and right shaped?
I'm drawing a Bell (church bell) at the moment and drawing one side first and duplicating and reflecting it works fine to get the perfectly symmetrical shape, but when I want to adjust some handles or shaping, I would like to do this identically left and right without constantly having to adjust one side and duplicate it etc.
In Illustrator CS5 my anchor point handles are snapping to specific angles,which I don't want. I have to turn off Smart Guides to freely adjust the handles.
Under preferences, Smart Guides, I turned off the custom construction guides, but even this did not correct the issue. I love using Smart Guides and I thought there were just in face that 'guides' and provided no snapping.
I also tried turning off 'snapping to point' to see if that was creating an issue, but no dice.
I can provide my system settings in case:
Mac OSX 10.8.4 16 GB memory Illustrator CS5
Wanted to ensure I was not missing a feature I couldn't find or research before trying to reset my preferences.
While using the pen tool, moving the current anchor point by hold down the spacebar, is a great time-saver and I use it frequently. But I find it a little frustrating that, when closing a path, the "spacebar" feature does not work. Instead, the apposing direction point goes whacko. Is there an alternate keyboard shortcut to overcome it? Even though I "know" it won't work, I seem unable to resist holding the spacebar to fine-tune the last anchor point.
I'm wondering how it's possible to drag only one handle out of an anchor point. Sometimes I have a path and some anchor points have only one handle dragged out. Now I want to adjust the other handle _without_ changing the already positioned handle. Is this even possible?
The "convert anchor point tool" does allow me to drag out handles, but only both at a time. This always results in changing the already positioned handle's position.
In an earlier Illustrator CS version, i was able to display any Paths' anchor point Numbers or label. But in CS6 with both "Anchor/Path Labels" enabled in Prefs. > Smart Guide section and in View > Smart Guides, no Point Numbers are displayed.
How to display each paths anchor point numbers or label?
